Upload Button Icon Add office photos

Filter interviews by

Chopra Industries Engineer Interview Questions, Process, and Tips for Experienced

Updated 11 Apr 2022

Chopra Industries Engineer Interview Experiences for Experienced

1 interview found

Engineer Interview Questions & Answers

user image Anonymous

posted on 11 Apr 2022

I applied via Walk-in and was interviewed before Apr 2021. There were 2 interview rounds.

Round 1 - Technical 

(6 Questions)

  • Q1. What is transformer Ans- trannsformer is nothing but it is a static machine which used for step up and step down the voltage.
  • Ans. 

    A transformer is a static machine used for stepping up or stepping down voltage.

    • Transformers are used to transfer electrical energy from one circuit to another through electromagnetic induction.

    • They consist of two coils of wire, the primary and secondary, wrapped around a magnetic core.

    • The primary coil is connected to the input voltage source, while the secondary coil is connected to the output load.

    • Transformers can in...

  • Answered by AI
  • Q2. What is CT Ans- current transfomer measure the current therefore used in substation
  • Ans. 

    CT or Current Transformer is an instrument used to measure high currents in power systems.

    • CT is used to step down high currents to a level that can be measured by instruments.

    • It is commonly used in power systems to measure the current flowing through transmission lines.

    • CTs are also used for protection purposes, to detect faults and isolate faulty sections of the power system.

    • They are available in different types and si...

  • Answered by AI
  • Q3. What is PT Ans -potentioan tranfore measure the voltage therefore used in line
  • Ans. 

    PT stands for Potential Transformer, which is used to measure high voltage in power systems.

    • PT is a type of instrument transformer that steps down high voltage to a lower voltage that can be safely measured by instruments.

    • It is commonly used in power systems to measure voltage levels and protect equipment from overvoltage.

    • PTs are also used in conjunction with current transformers (CTs) to measure power and calculate en...

  • Answered by AI
  • Q4. Explain about previouse job Ans- handle manpower ,completing work on time,handle work of shutdown etc
  • Q5. What is SOV Solenoid operating value is a types of value fuction of SOV - when cutrent flow through coil according to faraday law it operates Sov is used to open and close in f.f.p.h line
  • Ans. 

    SOV stands for Solenoid Operating Valve and is used to open and close valves in fluid power systems.

    • SOV is a type of valve that operates when current flows through its coil.

    • It is commonly used in fluid power systems to control the flow of fluids.

    • SOV can be used to open and close valves in f.f.p.h line.

    • The operation of SOV is based on Faraday's law of electromagnetic induction.

  • Answered by AI
  • Q6. What is circuit breaker Ans - circuit breaker is nothing but it connect and discunnect the circuit and protect the transfomer also
  • Ans. 

    A circuit breaker is an electrical switch that automatically interrupts an electrical circuit to prevent damage or fire.

    • It is designed to protect electrical circuits from damage caused by overload or short circuit.

    • It works by detecting the excess current and interrupting the flow of electricity.

    • It can be reset manually or automatically after tripping.

    • It is commonly used in homes, buildings, and industrial settings.

    • Exam...

  • Answered by AI
Round 2 - One-on-one 

(1 Question)

  • Q1. And also asking other question related my previous job and gave reply of question as my experience

Interview Preparation Tips

Interview preparation tips for other job seekers - I am so excite new work ...he want to know your knowledge that u are eligible or not

Interview questions from similar companies

Interview experience
5
Excellent
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Walk-in and was interviewed in Nov 2024. There were 6 interview rounds.

Round 1 - HR 

(2 Questions)

  • Q1. Can you provide an introduction about yourself?
  • Q2. What is the organizational structure of the toolroom?
Round 2 - Technical 

(2 Questions)

  • Q1. Organization structure
  • Q2. What is the process of mold maintenance?
Round 3 - Assignment 

Encourage a positive culture that fosters the development of new ideas and activities for improvement.

Round 4 - Technical 

(2 Questions)

  • Q1. What is the difference between corrective action and preventive action?
  • Q2. What are the differences between preventive maintenance and predictive maintenance?
Round 5 - Technical 

(2 Questions)

  • Q1. What is breakdown maintenance?
  • Q2. What is the frequency of preventive maintenance?
Round 6 - Technical 

(2 Questions)

  • Q1. Lifter pad and lifter different
  • Q2. What is the frequency of tool life

Interview Preparation Tips

Interview preparation tips for other job seekers - Good job and learning opportunities within the KML group.
Interview experience
5
Excellent
Difficulty level
Hard
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Campus Placement and was interviewed in Nov 2024. There were 4 interview rounds.

Round 1 - Aptitude Test 

It been from your studies and some from general knowledge and few are technical

Round 2 - Group Discussion 

GD is about the new technology in automotive industry

Round 3 - HR 

(3 Questions)

  • Q1. It's about me and my family
  • Q2. Technical questions from polymer materials
  • Q3. My experience in industry
Round 4 - Technical 

(2 Questions)

  • Q1. Explanation about my projects
  • Q2. How is injection molding machine working and new technology development in machine's

Interview Preparation Tips

Interview preparation tips for other job seekers - Keep on trying and don't let you down at any time in interview
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I was interviewed in Aug 2024.

Round 1 - Technical 

(3 Questions)

  • Q1. What is the rotary shaft marital
  • Ans. 

    Rotary shaft material refers to the material used to construct the rotating shaft in a machine or equipment.

    • Common materials include steel, stainless steel, aluminum, and titanium.

    • The choice of material depends on factors such as strength, corrosion resistance, and cost.

    • For high-speed applications, materials with good fatigue resistance like chrome-molybdenum steel are preferred.

    • In corrosive environments, materials lik...

  • Answered by AI
  • Q2. Tig welding gas
  • Q3. How you will manage the department and service
  • Ans. 

    I will manage the department by setting clear goals, providing support to team members, monitoring progress, and fostering a positive work environment.

    • Set clear goals and expectations for the department

    • Provide support and resources to team members

    • Monitor progress and performance regularly

    • Foster a positive work environment through open communication and recognition of achievements

  • Answered by AI

I applied via Approached by Company and was interviewed in Sep 2022. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Coding Test 

C questions, ALorithms , logical questions

Round 3 - One-on-one 

(2 Questions)

  • Q1. C questions, Linux internals
  • Q2. CAN , SPI,I2C protocols

Interview Preparation Tips

Interview preparation tips for other job seekers - Project related, c questions , Linux system programming questions. After that HR interview

I applied via Walk-in

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Don’t add your photo or details such as gender, age, and address in your resume. These details do not add any value.
View all tips
Round 2 - Technical 

(1 Question)

  • Q1. About Working experience and working area knowledge.
Round 3 - HR 

(6 Questions)

  • Q1. What are your strengths and weaknesses?
  • Q2. Why are you looking for a change?
  • Q3. What are your salary expectations?
  • Q4. What is your family background?
  • Q5. Share details of your previous job.
  • Q6. Tell me about yourself.

Interview Preparation Tips

Interview preparation tips for other job seekers - What are the things you have done on earlier company you may explain clearly, definitely you will get the job.
Interview experience
5
Excellent
Difficulty level
Hard
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via AmbitionBox and was interviewed before Oct 2022. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Properly align and format text in your resume. A recruiter will have to spend more time reading poorly aligned text, leading to high chances of rejection.
View all tips
Round 2 - HR 

(1 Question)

  • Q1. Genral comman Question .
Round 3 - Technical 

(1 Question)

  • Q1. What is TCU MOTOR Allighmnent Extrusion type Heat Exchanger type
  • Ans. 

    TCU stands for Temperature Control Unit. It is used in various industries for controlling and maintaining the temperature of different processes.

    • TCU is commonly used in industries such as manufacturing, automotive, and pharmaceuticals.

    • Motor alignment refers to the process of aligning the motor shaft with the driven equipment to ensure smooth operation.

    • Extrusion type refers to the process of shaping materials by forcing...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Prepair basic Mechanical Question

Interview Questionnaire 

3 Questions

  • Q1. What is MSA SPC and 7qc tools?
  • Ans. 

    MSA SPC and 7qc tools are quality control methods used in manufacturing and engineering.

    • MSA (Measurement System Analysis) is used to evaluate the measurement system's ability to provide accurate and reliable data.

    • SPC (Statistical Process Control) is used to monitor and control a process to ensure it operates within its limits and produces consistent results.

    • 7qc tools (Seven Quality Control Tools) are a set of technique...

  • Answered by AI
  • Q2. Sheet metal process ?
  • Ans. 

    Sheet metal process involves cutting, bending, and shaping metal sheets to create various products.

    • Cutting: using tools like shears, lasers, or plasma cutters to cut the metal sheet into the desired shape

    • Bending: using press brakes or rollers to bend the metal sheet into the desired shape

    • Shaping: using tools like hammers or punches to create specific features or designs on the metal sheet

    • Assembly: joining multiple meta...

  • Answered by AI
  • Q3. Defects in sheet metal?
  • Ans. 

    Defects in sheet metal can occur due to various reasons.

    • Warping

    • Cracking

    • Lack of uniformity

    • Corrosion

    • Scratches

    • Dents

    • Blisters

    • Porosity

  • Answered by AI

I applied via Naukri.com and was interviewed before Feb 2021. There was 1 interview round.

Round 1 - Technical 

(1 Question)

  • Q1. Department common functional questions, basic Material Management questions

Interview Preparation Tips

Interview preparation tips for other job seekers - Attitude is Must, honest, working knowledge
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Referral and was interviewed in Jan 2023. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Double-check your resume for any spelling mistakes. The recruiter may consider spelling mistakes as careless behavior or poor communication skills.
View all tips
Round 2 - HR 

(2 Questions)

  • Q1. Introduction and salary structure
  • Q2. Reason for leaving job

Interview Preparation Tips

Interview preparation tips for other job seekers - Knowledge about what you write in resume .and production process

Chopra Industries Interview FAQs

How many rounds are there in Chopra Industries Engineer interview for experienced candidates?
Chopra Industries interview process for experienced candidates usually has 2 rounds. The most common rounds in the Chopra Industries interview process for experienced candidates are Technical and One-on-one Round.
What are the top questions asked in Chopra Industries Engineer interview for experienced candidates?

Some of the top questions asked at the Chopra Industries Engineer interview for experienced candidates -

  1. What is circuit breaker Ans - circuit breaker is nothing but it connect and dis...read more
  2. What is transformer Ans- trannsformer is nothing but it is a static machine whi...read more
  3. What is SOV Solenoid operating value is a types of value fuction of SOV - when ...read more

Tell us how to improve this page.

People are getting interviews through

based on 1 Chopra Industries interview
WalkIn
100%
Low Confidence
?
Low Confidence means the data is based on a small number of responses received from the candidates.
Software Developer
16 salaries
unlock blur

₹4 L/yr - ₹7 L/yr

Network Engineer
14 salaries
unlock blur

₹1.6 L/yr - ₹4.1 L/yr

Assistant Manager
9 salaries
unlock blur

₹4.5 L/yr - ₹9.4 L/yr

Quality Engineer
8 salaries
unlock blur

₹1.5 L/yr - ₹3 L/yr

Team Lead
7 salaries
unlock blur

₹2.8 L/yr - ₹9 L/yr

Explore more salaries
Compare Chopra Industries with

Yazaki

3.8
Compare

Delphi TVS

4.0
Compare

JK Tyres

3.7
Compare

Lucas-TVS

4.0
Compare

Calculate your in-hand salary

Confused about how your in-hand salary is calculated? Enter your annual salary (CTC) and get your in-hand salary
Did you find this page helpful?
Yes No
write
Share an Interview