Add office photos
Filter interviews by
Canaan Engineering QA QC Engineer Interview Questions, Process, and Tips
Top Canaan Engineering QA QC Engineer Interview Questions and Answers
- Q1. How to Inspect Raw material Like Plate, Pipe, Fittings, Flanges Etc.? How to Review MTC? How to check Shell? How to check Dish End? How to check Cone? How to inspect Heat ...read more
- Q2. Welding rod types. Which are applicable to CS to SS 310, 316, 304.
- Q3. How to deal with tolerance? Where to refer this tolerance.
Canaan Engineering QA QC Engineer Interview Experiences
2 interviews found
I was interviewed in Aug 2022.
(1 Question)
- Q1. How many types of oposition in welding
- Ans.
There are several types of opposition in welding, including joint design, material properties, and welding process.
Joint design: Different types of joints require different welding techniques and considerations.
Material properties: The type of material being welded can affect the welding process and the quality of the weld.
Welding process: There are various welding processes, such as arc welding, resistance welding, an...
Job discussion,that what was your role, at site.
My role is to look after welding quality and reports preparation for inspection with clients, listing of qualified welding of there position of welding etc
Interview Preparation Tips
Selected
I applied via Referral and was interviewed before Aug 2022. There was 1 interview round.
(5 Questions)
- Q1. How to Inspect Raw material Like Plate, Pipe, Fittings, Flanges Etc.? How to Review MTC? How to check Shell? How to check Dish End? How to check Cone? How to inspect Heat exchanger? How to offer to third p...
- Ans.
Inspecting raw materials and components for quality assurance in engineering projects involves reviewing MTCs, checking various components like shell, dish end, cone, and heat exchangers, offering third-party inspections, following QAP, and conducting visual checks.
Review Material Test Certificates (MTCs) for compliance with specifications
Check the dimensions, surface finish, and material composition of plates, pipes, ...
- Q2. Some standards name. About U Stamp process
- Q3. How to deal with tolerance? Where to refer this tolerance.
- Ans.
Tolerance in QA QC refers to acceptable deviation from a specified standard. It is important to refer to relevant industry standards or project specifications.
Refer to industry standards or project specifications for tolerance limits
Ensure that all measurements and inspections are within the specified tolerance range
Communicate any deviations from tolerance to relevant stakeholders
Implement corrective actions if tolera...
- Q4. Welding rod types. Which are applicable to CS to SS 310, 316, 304.
- Ans.
Various welding rod types are applicable for welding carbon steel to stainless steel 310, 316, and 304.
For welding carbon steel to stainless steel 310, 316, and 304, commonly used welding rod types include E309L, E316L, and E308L.
E309L welding rods are suitable for welding stainless steel 310 to carbon steel.
E316L welding rods are ideal for welding stainless steel 316 to carbon steel.
E308L welding rods are commonly use...
- Q5. About WPS PQR. How to make PQR?
Top trending discussions
Interview questions from similar companies
Electrical Engineer Interview Questions & Answers
Evision Technoserve
Anonymous
posted on 8 Dec 2022
I applied via Recruitment Consulltant and was interviewed in Nov 2022. There were 3 interview rounds.
What is electrical machine
Different between ac and dc
What is rectifiers
S.I unit of current
* More type question asked me ......
(2 Questions)
- Q1. * Tell me about your self * family information * releated question in my job * which type do you work intrested
- Ans.
First of all thankyou sir because you give me this apportunity to introduce my self
My name yogesh kumar from aligarh at begam bagh
I have passed 3 yr diploma from electrical
And i am pursuing Java and python....
I am preparing for junior engineering...
I worked carefully .
Serve new ideas
Best communication skill
Hardworking
Family details
In my family Total seven member
My father and mom
Daughter three and me...
- Q2. Related question asked for this job
Interview Preparation Tips
(6 Questions)
- Q1. What are your salary expectations?
- Ans.
I expect a competitive salary based on my experience, skills, and the responsibilities of the role.
I have researched the average salary range for Quality Engineers in the industry.
I have considered my years of experience and level of expertise in the field.
I am open to negotiation and willing to discuss the salary package based on the overall compensation package offered.
I value fair compensation that aligns with the m...
- Q2. What is your family background?
- Ans.
My family background is diverse and multicultural, with members from different countries and professions.
My father is a doctor and my mother is a teacher.
I have two siblings, one is an engineer and the other is a lawyer.
We have relatives living in different parts of the world, including the United States, India, and Australia.
Our family gatherings are always filled with different languages, cuisines, and traditions.
- Q3. What are your strengths and weaknesses?
- Ans.
My strengths include attention to detail, problem-solving skills, and strong analytical abilities. My weaknesses include being overly critical of my own work and sometimes struggling with delegation.
Strength: Attention to detail - I have a keen eye for spotting errors and inconsistencies in processes and products.
Strength: Problem-solving skills - I enjoy analyzing complex problems and finding effective solutions.
Stren...
- Q4. Tell me about yourself.
- Ans.
I am a Quality Engineer with experience in ensuring product quality and implementing quality control processes.
Experienced Quality Engineer
Skilled in ensuring product quality
Proficient in implementing quality control processes
Strong attention to detail
Knowledge of quality standards and regulations
Experience in conducting audits and inspections
Ability to analyze data and identify areas for improvement
- Q5. Which project are you create I your academic year
- Ans.
I created a project on improving the quality control process in a manufacturing company.
Implemented statistical process control techniques to monitor and analyze production data
Developed a quality control plan to identify and address potential defects
Conducted root cause analysis to determine the source of quality issues
Collaborated with cross-functional teams to implement corrective actions
Evaluated the effectiveness ...
- Q6. My short term and long term goal
- Ans.
My short term goal is to gain experience and knowledge in quality engineering, while my long term goal is to become a senior quality engineer and contribute to the development of innovative quality control processes.
Short term goal: Gain experience and knowledge in quality engineering
Long term goal: Become a senior quality engineer and contribute to the development of innovative quality control processes
Interview Preparation Tips
Electrical Engineer Interview Questions & Answers
Evision Technoserve
Anonymous
posted on 1 Aug 2022
I was interviewed before Aug 2021.
(2 Questions)
- Q1. Electrical engineering
- Q2. Self information normal computer knowlage
(2 Questions)
- Q1. Electrical engineering
- Q2. Self information test
(1 Question)
- Q1. Only one on one round
Interview Preparation Tips
Singing
Playing cricket
Canaan Engineering Interview FAQs
Some of the top questions asked at the Canaan Engineering QA QC Engineer interview -
Tell us how to improve this page.
Interview Questions for Popular Designations
- Senior QA QC Engineer Interview Questions
- QA/QC Manager Interview Questions
- Electrical Engineer Interview Questions
- Executive Engineer Interview Questions
- Senior Engineer Mechanical Interview Questions
- Quality Engineer Interview Questions
- Shift Engineer Interview Questions
- QA QC Executive Interview Questions
- Show more
Interview Questions from Similar Companies
Canaan Engineering QA QC Engineer Reviews and Ratings
based on 3 reviews
Rating in categories
|
Production Engineer
6
salaries
|  ₹2.3 L/yr - ₹4.8 L/yr |
|
Production Supervisor
6
salaries
| ₹1.8 L/yr - ₹3 L/yr |
|
Project Engineer Mechanical
5
salaries
| ₹3 L/yr - ₹5.8 L/yr |
|
Purchase Engineer
5
salaries
| ₹3.2 L/yr - ₹3.7 L/yr |
|
Project Engineer
4
salaries
| ₹1.7 L/yr - ₹4 L/yr |
Marpu Foundation
Huawei Technologies
HCL Infosystems
Exotic Learning
- Home >
- Interviews >
- Canaan Engineering Interview Questions >
- Canaan Engineering QA QC Engineer Interview Questions
