Filter interviews by
Clear (1)
I applied via Company Website and was interviewed in Apr 2024. There was 1 interview round.
The machine is a device that uses power to perform a task or function.
Machines can range from simple tools like a hammer to complex equipment like a computer.
They are typically powered by electricity, fuel, or manual labor.
Examples include a washing machine, a drill press, and a crane.
The best machine breakdown is one that is easily diagnosed and repaired quickly, minimizing downtime and cost.
A breakdown with clear symptoms that point to a specific issue
A breakdown that can be fixed with readily available parts or tools
A breakdown that does not require extensive troubleshooting or specialized knowledge
Examples: blown fuse, loose connection, clogged filter
Top trending discussions
I applied via Recruitment Consulltant and was interviewed before Sep 2023. There was 1 interview round.
Lathe parts include headstock, tailstock, carriage, and tool post. Types of bearings used in lathes are ball bearings and roller bearings.
Lathe parts: headstock, tailstock, carriage, tool post
Types of bearings: ball bearings, roller bearings
posted on 11 Sep 2023
I applied via Referral
posted on 13 May 2022
I applied via Naukri.com and was interviewed in Apr 2022. There were 2 interview rounds.
Refractories are materials that can withstand high temperatures and are used in furnaces, kilns, and other high-temperature applications.
Refractories are made from materials such as clay, silica, alumina, and magnesia.
They are used to line furnaces, kilns, and other high-temperature equipment to protect them from heat and corrosion.
Refractories are classified based on their chemical composition, physical properties, an...
There are three types of refractories: acidic, basic, and neutral.
Refractories are materials that can withstand high temperatures and are used in furnaces, kilns, and other high-temperature applications.
Acidic refractories are made of materials like silica and alumina and are used in acidic environments.
Basic refractories are made of materials like magnesia and dolomite and are used in basic environments.
Neutral refrac...
All type crusher equipment sarvice
All type crusher equipment sarvice
There are various types of crushers and plants used in industries for crushing and processing materials.
Types of crushers include jaw crushers, cone crushers, impact crushers, and gyratory crushers.
Plants used for crushing and processing materials include stationary plants, portable plants, and mobile plants.
Crushers and plants are used in industries such as mining, construction, and recycling.
Tools are classified into hand tools, power tools, cutting tools, measuring tools, and torque wrenches are used to apply a specific amount of torque to a fastener.
Hand tools include hammers, screwdrivers, pliers, wrenches, etc.
Power tools include drills, saws, sanders, grinders, etc.
Cutting tools include scissors, knives, shears, etc.
Measuring tools include rulers, tape measures, calipers, etc.
Torque wrenches are used ...
Washers are thin plates with a hole in the center used to distribute load and prevent damage to surfaces.
Flat washers: used to distribute load and prevent damage to surfaces
Lock washers: used to prevent nuts and bolts from loosening
Spring washers: used to absorb shock and vibration
Belleville washers: used to compensate for thermal expansion or contraction
Wave washers: used to provide flexibility and prevent loosening
C-
Spanners are tools used to tighten or loosen nuts and bolts. There are various types of spanners available for different purposes.
Open-end spanner
Ring spanner
Combination spanner
Adjustable spanner
Pipe wrench
Socket wrench
Torque wrench
I applied via Company Website and was interviewed in Apr 2022. There was 1 interview round.
Press filter is a device used for separating solids from liquids.
It works by applying pressure to the mixture to force the liquid through a filter media while retaining the solids.
It is commonly used in industries such as chemical, pharmaceutical, and food processing.
Examples of press filters include belt filter press, plate and frame filter press, and rotary vacuum-drum filter.
Press filters are efficient and cost-effe...
To maintain pressure in press filter, ensure proper sealing, check for leaks, and adjust feed rate and pressure settings.
Check for proper sealing of the filter plates and gaskets
Inspect for any leaks in the system and repair them promptly
Adjust the feed rate and pressure settings as per the manufacturer's recommendations
Regularly clean and maintain the filter to prevent clogging and pressure drop
Monitor the pressure ga...
The model of hydraulic cylinder in press filter depends on the specific press filter being used.
The model of hydraulic cylinder can vary depending on the size and capacity of the press filter.
Some common models of hydraulic cylinders used in press filters include tie rod cylinders and welded cylinders.
The specific model of hydraulic cylinder used in a press filter can be determined by consulting the manufacturer's spec...
Roller bearings are commonly used in bogie wheels.
Roller bearings are preferred over plain bearings due to their ability to handle heavy loads and reduce friction.
Tapered roller bearings are commonly used in locomotive bogie wheels.
Cylindrical roller bearings are also used in some bogie wheels.
The type of bearing used depends on the specific application and load requirements.
posted on 19 May 2017
I was interviewed in Oct 2016.
Experienced retail professional with strong leadership skills and a passion for customer service.
Over 5 years of retail management experience
Proven track record of increasing sales and improving customer satisfaction
Strong leadership and team-building skills
Passionate about providing excellent customer service
Bachelor's degree in Business Administration
Alumina is obtained from bauxite through the Bayer process.
Bauxite is crushed and mixed with sodium hydroxide to form a slurry.
The slurry is heated and pressurized in a digester to dissolve the alumina content.
The resulting solution is cooled and filtered to remove impurities.
The purified solution is then heated to precipitate the alumina as a white powder.
The alumina powder is washed, dried, and calcined to produce pu...
The reaction for Al extraction from alumina involves the reduction of alumina using carbon or electrolysis.
Alumina (Al2O3) is first converted into aluminum chloride (AlCl3) by reacting with hydrochloric acid.
The aluminum chloride is then reduced to aluminum metal by either carbon reduction or electrolysis.
In carbon reduction, carbon (usually in the form of coke) is heated with the aluminum chloride to produce aluminum ...
There are four main types of cast iron: gray iron, white iron, ductile iron, and malleable iron.
Gray iron is the most common type and has excellent castability and good machinability.
White iron is very hard and brittle, often used for wear-resistant applications.
Ductile iron has high strength and ductility, making it suitable for a wide range of applications.
Malleable iron is heat-treated to improve its strength and du
I applied via Recruitment Consultant and was interviewed before Apr 2020. There were 3 interview rounds.
Yes, I have experience handling pressure in my previous roles.
I prioritize tasks and manage my time effectively to meet deadlines
I remain calm and focused under pressure
I communicate effectively with my team to ensure everyone is on the same page
For example, in my previous job as a shift supervisor, I had to handle a busy shift with a shortage of staff. I delegated tasks efficiently and communicated clearly with my tea...
I applied via Referral and was interviewed in Oct 2023. There were 2 interview rounds.
based on 1 interview
Interview experience
based on 1 review
Rating in categories
Assistant Manager
21
salaries
| ₹0 L/yr - ₹0 L/yr |
Deputy Manager
18
salaries
| ₹0 L/yr - ₹0 L/yr |
Manager
15
salaries
| ₹0 L/yr - ₹0 L/yr |
Senior Engineer
13
salaries
| ₹0 L/yr - ₹0 L/yr |
Site Supervisor
10
salaries
| ₹0 L/yr - ₹0 L/yr |
TRL Krosaki Refractories
IFGL Refractories
Dalmia-OCL
Dalmia Bharat Group