Upload Button Icon Add office photos

Filter interviews by

Clear (1)

Calderys India Refractories Junior Engineer Interview Questions and Answers

Updated 24 Jul 2021

Calderys India Refractories Junior Engineer Interview Experiences

1 interview found

Interview Questionnaire 

1 Question

  • Q1. Questions related to refractory , steel & ceramics

Interview questions from similar companies

I applied via Naukri.com and was interviewed in Apr 2022. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all Resume tips
Round 2 - Technical 

(2 Questions)

  • Q1. What is refractories
  • Ans. 

    Refractories are materials that can withstand high temperatures and are used in furnaces, kilns, and other high-temperature applications.

    • Refractories are made from materials such as clay, silica, alumina, and magnesia.

    • They are used to line furnaces, kilns, and other high-temperature equipment to protect them from heat and corrosion.

    • Refractories are classified based on their chemical composition, physical properties, an...

  • Answered by AI
  • Q2. How many types refractories
  • Ans. 

    There are three types of refractories: acidic, basic, and neutral.

    • Refractories are materials that can withstand high temperatures and are used in furnaces, kilns, and other high-temperature applications.

    • Acidic refractories are made of materials like silica and alumina and are used in acidic environments.

    • Basic refractories are made of materials like magnesia and dolomite and are used in basic environments.

    • Neutral refrac...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Respcted sir
Please find the my attachment
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Referral and was interviewed in Dec 2023. There was 1 interview round.

Round 1 - Technical 

(2 Questions)

  • Q1. Moment of forces
  • Ans. 

    Moment of forces refers to the rotational effect of a force around a point or axis.

    • Moment of forces is also known as torque.

    • It is calculated by multiplying the magnitude of the force by the perpendicular distance from the point or axis of rotation.

    • The unit of moment of forces is Newton-meter (Nm) or foot-pound (ft-lb).

    • Positive moment of forces causes counterclockwise rotation, while negative moment causes clockwise rot...

  • Answered by AI
  • Q2. GD & T features MMC LMC
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
2-4 weeks
Result
Selected Selected

I was interviewed in Mar 2023.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all Resume tips
Round 2 - One-on-one 

(2 Questions)

  • Q1. Not that much to share they just ask the day to day challenge handling and process of purchasing a material...
  • Q2. How many mails do you handle
  • Ans. 

    I handle approximately 50-100 emails per day in my current role as a Senior Engineer.

    • I prioritize emails based on urgency and importance

    • I respond to emails promptly to ensure efficient communication

    • I organize emails into folders for easy access and reference

  • Answered by AI
Round 3 - One-on-one 

(1 Question)

  • Q1. Same as it is before...
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
2-4 weeks
Result
Selected Selected

I applied via Naukri.com and was interviewed before Dec 2023. There was 1 interview round.

Round 1 - Technical 

(2 Questions)

  • Q1. All bout current job description.
  • Q2. Details about structural design and its analysis.
Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all Resume tips
Round 2 - Aptitude Test 

Basic aptitude test with time limit

Round 3 - One-on-one 

(2 Questions)

  • Q1. Basically questions about the trade about you are working or knowledge of job and experience , the job in the field of interest is very important
  • Q2. Ask about educational qualification and any achievements

Interview Preparation Tips

Interview preparation tips for other job seekers - Stay focused and keep your goals clear to get the final round

I applied via Company Website and was interviewed in Apr 2022. There was 1 interview round.

Round 1 - Technical 

(4 Questions)

  • Q1. Say something about press filter
  • Ans. 

    Press filter is a device used for separating solids from liquids.

    • It works by applying pressure to the mixture to force the liquid through a filter media while retaining the solids.

    • It is commonly used in industries such as chemical, pharmaceutical, and food processing.

    • Examples of press filters include belt filter press, plate and frame filter press, and rotary vacuum-drum filter.

    • Press filters are efficient and cost-effe...

  • Answered by AI
  • Q2. How to maintain pressure in press filter
  • Ans. 

    To maintain pressure in press filter, ensure proper sealing, check for leaks, and adjust feed rate and pressure settings.

    • Check for proper sealing of the filter plates and gaskets

    • Inspect for any leaks in the system and repair them promptly

    • Adjust the feed rate and pressure settings as per the manufacturer's recommendations

    • Regularly clean and maintain the filter to prevent clogging and pressure drop

    • Monitor the pressure ga...

  • Answered by AI
  • Q3. What is the model of hydraulic cylinder in press filter
  • Ans. 

    The model of hydraulic cylinder in press filter depends on the specific press filter being used.

    • The model of hydraulic cylinder can vary depending on the size and capacity of the press filter.

    • Some common models of hydraulic cylinders used in press filters include tie rod cylinders and welded cylinders.

    • The specific model of hydraulic cylinder used in a press filter can be determined by consulting the manufacturer's spec...

  • Answered by AI
  • Q4. Which type bearing use in bogie wheel
  • Ans. 

    Roller bearings are commonly used in bogie wheels.

    • Roller bearings are preferred over plain bearings due to their ability to handle heavy loads and reduce friction.

    • Tapered roller bearings are commonly used in locomotive bogie wheels.

    • Cylindrical roller bearings are also used in some bogie wheels.

    • The type of bearing used depends on the specific application and load requirements.

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Focus on those jobs that you meet the minimum requirements for, you should match the mejority of the keywords in the job description.
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Naukri.com and was interviewed before Apr 2022. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all Resume tips
Round 2 - HR 

(1 Question)

  • Q1. Basics about your self
Round 3 - Technical 

(1 Question)

  • Q1. Regarding your experience and related questions

Interview Preparation Tips

Interview preparation tips for other job seekers - Be your self and confident
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Referral and was interviewed in Jan 2023. There were 3 interview rounds.

Round 1 - Technical 

(1 Question)

  • Q1. Bolt grades for different bolts
  • Ans. 

    Different bolt grades are used for various applications based on their strength and durability.

    • Bolt grades are typically indicated by numbers or letters, such as Grade 2, Grade 5, Grade 8, etc.

    • Higher grade bolts have higher strength and are used in applications where greater load-bearing capacity is required.

    • Common grades include Grade 2, Grade 5, Grade 8, and stainless steel bolts.

    • Each grade has specific properties an...

  • Answered by AI
Round 2 - Technical 

(1 Question)

  • Q1. About machine design, motors,gearbox ratio, output, earlier work done
Round 3 - HR 

(1 Question)

  • Q1. Salary negotiations

I applied via Referral and was interviewed before May 2021. There were 3 interview rounds.

Round 1 - Technical 

(1 Question)

  • Q1. Genaral questions about pas work experience
Round 2 - One-on-one 

(1 Question)

  • Q1. Questions related to work were asked and personal family details were also asked
Round 3 - HR 

(1 Question)

  • Q1. About compensation and time of joining only

Interview Preparation Tips

Interview preparation tips for other job seekers - Be prepared about your past work experience related process & technical questions
Contribute & help others!
anonymous
You can choose to be anonymous

Recently Viewed

INTERVIEWS

Vedanta Aluminium

No Interviews

INTERVIEWS

Vedanta Aluminium

No Interviews

INTERVIEWS

Vedanta Aluminium

No Interviews

SALARIES

Coherent Market Insights

INTERVIEWS

Coherent Market Insights

No Interviews

INTERVIEWS

Calderys India Refractories

No Interviews

LIST OF COMPANIES

Vedanta Aluminium

Locations

INTERVIEWS

Calderys India Refractories

20 top interview questions

INTERVIEWS

Mu Sigma

10 top interview questions

INTERVIEWS

Coherent Market Insights

No Interviews

Tell us how to improve this page.

Interview Questions from Similar Companies

Metso Interview Questions
4.2
 • 65 Interviews
Hindustan Zinc Interview Questions
3.8
 • 43 Interviews
Mecon Interview Questions
3.9
 • 42 Interviews
Rio Tinto Interview Questions
3.5
 • 40 Interviews
View all
Assistant Manager
21 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Deputy Manager
18 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Manager
15 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Senior Engineer
13 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Site Supervisor
10 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Explore more salaries
Compare Calderys India Refractories with

TRL Krosaki Refractories

3.9
Compare

IFGL Refractories

3.7
Compare

Dalmia-OCL

3.8
Compare

Dalmia Bharat Group

4.1
Compare
Did you find this page helpful?
Yes No
write
Share an Interview
Rate your experience using AmbitionBox
Terrible
Terrible
Poor
Poor
Average
Average
Good
Good
Excellent
Excellent