AmbitionBox
Interview Questions
- Reviews
- Salaries
- Interview Questions
- About Company
- Benefits
- Jobs
- Office Photos
- Community
Add office photos
Filter interviews by
C tech Build Home Civil Site Engineer Interview Questions, Process, and Tips
C tech Build Home Civil Site Engineer Interview Experiences
1 interview found
SATISH CHAND
I applied via Referral and was interviewed before Aug 2021. There was 1 interview round.
(5 Questions)
- Q1. How many are cubic feet in a cubic metre
- Ans.
There are approximately 35.3147 cubic feet in a cubic meter.
1 cubic meter is equal to 35.3147 cubic feet.
To convert cubic meters to cubic feet, multiply the value by 35.3147.
For example, 2 cubic meters is equal to 2 x 35.3147 = 70.6294 cubic feet.
- Q2. What is the meaning of a cubic metre
- Ans.
A cubic metre is a unit of volume that represents the amount of space occupied by a cube with sides measuring one meter each.
A cubic metre is equal to 1,000 liters or 35.3 cubic feet.
It is commonly used to measure the volume of solid objects or the capacity of containers.
For example, if you have a box with dimensions of 1 meter by 1 meter by 1 meter, its volume would be 1 cubic meter.
In civil engineering, cubic meters ...
- Q3. What is the standard size of ply board used for shuttering work
- Ans.
The standard size of ply board used for shuttering work varies depending on the project requirements.
The most commonly used size for ply board in shuttering work is 4 feet by 8 feet.
However, other sizes such as 3 feet by 6 feet or 2 feet by 4 feet may also be used depending on the project specifications.
The thickness of the ply board can range from 12mm to 18mm, again depending on the requirements of the project.
Ply bo...
- Q4. What is the grade of concrete
- Ans.
The grade of concrete refers to its strength and durability.
The grade of concrete is determined by its compressive strength, measured in megapascals (MPa).
Common grades of concrete include M10, M15, M20, M25, etc., where the number represents the compressive strength in MPa.
Higher grade concrete is used for structures that require greater strength, such as high-rise buildings or bridges.
The grade of concrete also depen...
- Q5. How many bags cement are used for M25 grade
- Ans.
The number of bags of cement required for M25 grade concrete depends on the mix ratio and the volume of concrete needed.
The mix ratio for M25 grade concrete is 1:1:2, which means 1 part cement, 1 part fine aggregate (sand), and 2 parts coarse aggregate (stone chips).
The volume of concrete needed can be calculated by multiplying the length, width, and height of the structure.
The weight of one bag of cement is typically ...
Interview Preparation Tips
Top trending discussions
Interview questions from similar companies
Anonymous
I applied via Job Fair and was interviewed in Nov 2023. There were 2 interview rounds.
In general, aptitude tests measure ones competence in logical reasoning, numerical skills, or verbal ability.
(5 Questions)
- Q1. What is the technical in my site ?
- Q2. What about this company ?
- Q3. What about my empolys ?
- Q4. In many cases what will be approch in this technical issus ?
- Ans.
The approach to technical issues in civil engineering often involves analyzing the problem, considering various solutions, and selecting the most feasible option.
Identify the technical issue and its impact on the project
Analyze the possible solutions and their pros and cons
Consider factors such as cost, time, and resources
Consult with team members or experts for input
Select the most feasible solution and implement it
Mo
- Q5. What is the technical ?
Interview Preparation Tips
I applied via Naukri.com
(3 Questions)
- Q1. What is cement grade?
- Ans.
Cement grade refers to the strength and quality of cement used in construction.
Cement grade is determined by the compressive strength of cement mortar cubes after 28 days of curing.
The most commonly used cement grades are 33, 43, and 53, indicating their respective compressive strengths in megapascals (MPa).
Higher cement grades are used for structures that require higher strength, such as bridges and high-rise building...
- Q2. Opc 33, 43, 53 grads.
- Q3. The standard size of a concrete cube is 15 cm × 15 cm × 15 cm
- Ans.
Yes, the standard size of a concrete cube is 15 cm × 15 cm × 15 cm.
The standard size of a concrete cube is used for testing the compressive strength of concrete.
The cubes are casted and cured for 28 days before testing.
The cubes are tested using a compression testing machine.
The compressive strength of concrete is calculated by dividing the maximum load applied to the cube by the cross-sectional area of the cube.
Interview Preparation Tips
I applied via Company Website and was interviewed in Sep 2022. There were 2 interview rounds.
(2 Questions)
- Q1. What is the curing on site engineering
- Ans.
Curing is the process of maintaining moisture and temperature conditions for freshly placed concrete to promote its hydration and strength gain.
Curing is essential for the strength and durability of concrete.
It involves keeping the concrete moist and at a proper temperature for a specific period of time.
Curing can be done using various methods such as water curing, membrane curing, and steam curing.
The duration of curi...
- Q2. What is the strength of cement
- Ans.
The strength of cement depends on its grade and type.
The strength of cement is measured in terms of compressive strength.
The grade of cement determines its strength. Higher the grade, higher the strength.
Type of cement also affects its strength. For example, Portland cement has higher strength than lime cement.
The strength of cement is also influenced by factors such as curing time, temperature, and humidity.
Interview Preparation Tips
a capability to do a job
I applied via Campus Placement and was interviewed in Mar 2022. There were 2 interview rounds.
General knowledge
(2 Questions)
- Q1. About civil engineering
- Q2. General knowledge Civil engineering
Interview Preparation Tips
I'm studying BTech engeneering
& Complete my diploma
I'm a good student
I applied via Naukri.com and was interviewed in Sep 2021. There was 1 interview round.
Interview Questionnaire
3 Questions
- Q1. Contraction lebal questions
- Q2. Jenral questions
- Q3. Atitude prasnalty
Interview Preparation Tips
Practice (out loud)
Share your story
Provide Evidence and data
Mirror the interviewers style
Prepare a few questions
Ask if they have any hesitation
Say thanks.
(2 Questions)
- Q1. Trouble shooting
- Q2. Monitoring log dob maven
Interview Preparation Tips
I applied via Company Website and was interviewed in Aug 2023. There were 3 interview rounds.
Test of sand and water mineral
(5 Questions)
- Q1. Direct are located in one place and another place etc..,
- Q2. Overall base of autocad desgin structure
- Ans.
Autocad design structure serves as the foundation for creating detailed and accurate engineering drawings.
Autocad design structure includes layers, blocks, and dimensions to organize and display information.
It allows for precise measurements, annotations, and annotations to be added to drawings.
Autocad design structure enables easy editing and modification of drawings.
Examples of autocad design structures include creat...
- Q3. Graphic design and interior design
- Q4. Design of road line
- Ans.
Design of road line involves determining the alignment, width, and markings of a road to ensure safety and efficiency.
Consider the traffic volume and speed when determining the width of the road.
Ensure proper alignment to minimize sharp curves and slopes.
Include appropriate road markings such as lane dividers, pedestrian crossings, and stop lines.
Take into account factors like drainage, visibility, and road conditions
- Q5. Construction of road project
- Ans.
Construction of road project involves planning, design, and execution of building roads for transportation.
Road project starts with surveying the land and designing the road layout.
Materials like asphalt, concrete, and gravel are used for construction.
Proper drainage systems are essential to prevent water damage to the road.
Quality control measures are implemented to ensure durability and safety.
Regular maintenance and...
Interview Preparation Tips
Web design
Graphic design
Interior design
Pumps desgin
Skills evaluated in this interview
mayuri bhosale
(2 Questions)
- Q1. Oops concepts php
- Q2. Aggregate function php
(1 Question)
- Q1. HDD related Fttx
(1 Question)
- Q1. Expected CTC Why you want to join the company
C tech Build Home Interview FAQs
Tell us how to improve this page.
Interview Questions for Popular Designations
- Civil Site Supervisor Interview Questions
- Civil Engineer Interview Questions
- Senior Civil Site Engineer Interview Questions
- Senior Civil Engineer Interview Questions
- Junior Engineer Civil Interview Questions
- Site Engineer Interview Questions
- Civil Foreman Interview Questions
- Civil Supervisor Interview Questions
- Show more
Civil Site Engineer Interview Questions from Similar Companies
C tech Build Home Civil Site Engineer Reviews and Ratings
based on 2 reviews
Rating in categories
TCS
Accenture
Wipro
Cognizant
- Home >
- Interviews >
- C tech Build Home Interview Questions >
- C tech Build Home Civil Site Engineer Interview Questions
