Upload Button Icon Add office photos

Filter interviews by

Brij Gopal Construction Company Civil Engineer-Highway/Roadway Interview Questions and Answers

Updated 8 Jul 2021

Brij Gopal Construction Company Civil Engineer-Highway/Roadway Interview Experiences

1 interview found

I applied via Company Website and was interviewed before Jul 2020. There was 1 interview round.

Interview Questionnaire 

2 Questions

  • Q1. What is GSB WMM DBM BC
  • Ans. 

    GSB, WMM, DBM, BC are different types of materials used in road construction.

    • GSB stands for Granular Sub Base and is the lowest layer of the road construction.

    • WMM stands for Wet Mix Macadam and is used as a base layer for the road.

    • DBM stands for Dense Bituminous Macadam and is used as a binder course layer.

    • BC stands for Bituminous Concrete and is the topmost layer of the road.

    • The selection of these materials depends on...

  • Answered by AI
  • Q2. Very

Interview Preparation Tips

Interview preparation tips for other job seekers - Very Good

Interview questions from similar companies

I applied via Naukri.com and was interviewed before Oct 2019. There was 1 interview round.

Interview Questionnaire 

4 Questions

  • Q1. What is blanket layer in formation of railway embankment.
  • Ans. 

    Blanket layer is a layer of soil placed on top of the subgrade to improve its strength and stability.

    • Blanket layer is used in the formation of railway embankments to provide a stable base for the tracks.

    • It is typically made up of compacted soil or other materials such as crushed rock or gravel.

    • The thickness of the blanket layer can vary depending on the soil conditions and the weight of the trains that will be using th...

  • Answered by AI
  • Q2. What is gap graded soil?.
  • Ans. 

    Gap graded soil is a type of soil that has a wide range of particle sizes with little or no intermediate-sized particles.

    • Gap graded soil has poor compaction characteristics and low permeability.

    • It is commonly found in areas with high erosion rates such as river banks and hillsides.

    • Examples of gap graded soil include gravelly soils and sandy soils with large void spaces.

    • It requires special attention during construction ...

  • Answered by AI
  • Q3. Explain Stress strain diagram of mild steel?.
  • Ans. 

    Stress strain diagram of mild steel shows the relationship between stress and strain during the deformation process.

    • The diagram has two parts: elastic and plastic.

    • In the elastic region, stress is proportional to strain.

    • In the plastic region, stress increases with strain but without any increase in strain.

    • The yield point is the point where plastic deformation begins.

    • The ultimate strength is the maximum stress that the m...

  • Answered by AI
  • Q4. What is aggregate impact testing and specifications of apparatus used in this testing?.
  • Ans. 

    Aggregate impact testing is a method to determine the toughness of aggregates used in road construction.

    • It involves dropping a metal hammer on a sample of aggregate and measuring the amount of fragmentation.

    • The apparatus used in this testing includes an impact testing machine, a cylindrical measure, a tamping rod, and a balance.

    • The impact testing machine consists of a metal base, a vertical guide, and a hammer of weigh...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Freshers should prepare technical domain well. And for experienced candidates should prepare become sound in his/her previous work related knowledge. Don't be hesitate and try to go here and there. Answers should be clear and limited to asked question only.
Interview experience
3
Average
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Referral and was interviewed before Mar 2022. There was 1 interview round.

Round 1 - One-on-one 

(3 Questions)

  • Q1. How was your Previous company experiences, and which project you handle?
  • Q2. What are the roles and responsibilities you handle and able to handle?
  • Q3. What are the components of bridges?
  • Ans. 

    Bridges consist of several components that work together to support the weight of the structure and the traffic it carries.

    • Foundation: supports the weight of the bridge and transfers it to the ground

    • Substructure: includes piers, abutments, and other supporting elements

    • Superstructure: includes the deck, girders, and other components that support the roadway

    • Deck: the surface on which vehicles travel

    • Parapets: walls or bar...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Be prepared, and ready with your basic abilities. Mentioned clearly what you have done in your experiences and how yourself is beneficial to company.

I applied via Naukri.com and was interviewed in Apr 2021. There was 1 interview round.

Interview Questionnaire 

3 Questions

  • Q1. What is M30 concrete
  • Ans. 

    M30 concrete is a type of high-strength concrete with a compressive strength of 30 MPa.

    • M30 concrete is commonly used in construction projects that require high strength and durability.

    • It is made by mixing cement, sand, and coarse aggregates in a specific ratio.

    • The ratio of cement, sand, and aggregates in M30 concrete is 1:1:2.

    • M30 concrete is suitable for building structures like bridges, dams, and high-rise buildings.

    • I...

  • Answered by AI
  • Q2. 1 cum rcc weight
  • Q3. What should be the rebar grade
  • Ans. 

    The rebar grade should be selected based on the design requirements and the structural load capacity.

    • The rebar grade is determined by the design engineer based on the structural requirements.

    • The grade of rebar is usually specified in the structural drawings and specifications.

    • The most commonly used rebar grades are 40, 60, and 75.

    • The higher the grade of rebar, the stronger it is and the more load it can bear.

    • The rebar ...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Always time follow technical specification .
Interview experience
2
Poor
Difficulty level
Hard
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Company Website and was interviewed in Sep 2023. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(3 Questions)

  • Q1. What is the branding sedule and explain
  • Ans. 

    Branding schedule is a plan outlining the timeline and activities for promoting a brand.

    • Branding schedule includes tasks such as creating a brand strategy, designing a logo, developing marketing materials, and planning advertising campaigns.

    • It helps ensure consistency in brand messaging and image across different platforms and channels.

    • Example: A branding schedule for a new product launch may include market research, l...

  • Answered by AI
  • Q2. Tel me concrete grade and mixing ratio
  • Ans. 

    Concrete grade and mixing ratio are crucial factors in determining the strength and durability of a structure.

    • Concrete grade refers to the strength of the concrete mix, typically denoted by a number like M20, M30, etc.

    • Mixing ratio is the proportion of cement, sand, and aggregate in the concrete mix, usually expressed as 1:x:y.

    • For example, a common mixing ratio for M20 grade concrete is 1:1.5:3, which means 1 part cemen

  • Answered by AI
  • Q3. How to do LABER maintenance in site
  • Ans. 

    Regularly inspect and maintain all equipment and tools used on site to ensure they are in good working condition.

    • Create a maintenance schedule for all equipment and tools used on site.

    • Check for any signs of wear and tear on equipment and tools.

    • Clean and lubricate equipment regularly to prevent rust and corrosion.

    • Replace any damaged or worn out parts immediately.

    • Train site workers on proper handling and maintenance of e...

  • Answered by AI

Interview Preparation Tips

Topics to prepare for URC Construction Civil Site Engineer interview:
  • Civil Engineering
Interview experience
5
Excellent
Difficulty level
Easy
Process Duration
More than 8 weeks
Result
Selected Selected

I appeared for an interview in Dec 2024.

Round 1 - HR 

(3 Questions)

  • Q1. What was your experience during the interview process?
  • Ans. 

    The interview process was thorough and challenging, but overall a positive experience.

    • The interview consisted of multiple rounds, including technical, behavioral, and possibly a site visit.

    • I was asked to discuss my previous projects and experiences in detail.

    • There were questions about problem-solving skills and how I handle challenging situations on site.

    • Overall, the interviewers were professional and provided a clear

  • Answered by AI
  • Q2. What are your salary expectations?
  • Ans. 

    My salary expectations are in line with industry standards and based on my experience and qualifications.

    • Research industry standards for Civil Site Engineers in the specific location

    • Consider years of experience and level of qualifications

    • Be prepared to negotiate based on job responsibilities and benefits package

  • Answered by AI
  • Q3. Why you last company leave
  • Ans. 

    Seeking new challenges and opportunities for growth.

    • Desire for career advancement

    • Looking for new challenges

    • Opportunity for professional growth

    • Company restructuring or downsizing

    • Relocation to a new city

  • Answered by AI

Interview Questionnaire 

1 Question

  • Q1. Hard core techanical

Interview Questionnaire 

1 Question

  • Q1. Business Ideas

Interview Preparation Tips

Interview preparation tips for other job seekers - Prepare properly for Interviews

I appeared for an interview in Sep 2016.

Interview Questionnaire 

1 Question

  • Q1. They asked me about RAM and ROM

Interview Preparation Tips

Round: Technical Interview
Experience: I studied about them before so it was not a problem for me

Skills: Coding Skills
College Name: IIT Kharagpur

I appeared for an interview before Aug 2016.

Interview Questionnaire 

1 Question

  • Q1. Questions on C++

Interview Preparation Tips

Round: Resume Shortlist
Experience: Only those with Java, C++ and JavaScript were shortlisted.

Round: Test
Experience: Pretty basic
Duration: 3 hours

Tell us how to improve this page.

Interview Questions from Similar Companies

AECOM Interview Questions
4.2
 • 118 Interviews
Apco Infratech Interview Questions
3.7
 • 116 Interviews
Bechtel Interview Questions
3.9
 • 68 Interviews
Samsung E&A Interview Questions
4.0
 • 61 Interviews
Wood Group Interview Questions
3.8
 • 60 Interviews
Psp Projects Interview Questions
3.9
 • 51 Interviews
View all
Highway Engineer
23 salaries
unlock blur

₹2 L/yr - ₹6.2 L/yr

Senior Engineer
19 salaries
unlock blur

₹4.5 L/yr - ₹7.3 L/yr

Accountant
16 salaries
unlock blur

₹2 L/yr - ₹4.2 L/yr

Store Officer
15 salaries
unlock blur

₹3.2 L/yr - ₹5 L/yr

Store Manager
14 salaries
unlock blur

₹6.6 L/yr - ₹10.2 L/yr

Explore more salaries
Compare Brij Gopal Construction Company with

AECOM

4.2
Compare

L&T Energy Hydrocarbon

3.8
Compare

Apco Infratech

3.7
Compare

Saipem

4.1
Compare
Did you find this page helpful?
Yes No
write
Share an Interview