10+ Ethics Group Interview Questions and Answers

Online PLC can be taken through various methods. Communication protocol is a set of rules for data exchange between devices.

• Online PLC can be taken through remote access software or web-based interfaces.

• Communication protocol defines the format and rules for data exchange between devices.

• Common communication protocols for PLCs include Modbus, Profibus, and Ethernet/IP.

• These protocols specify how data is transmitted, addressed, and verified for error-free communication.

• For exa...read more

The elastic modulus of steel is a measure of its stiffness and ability to withstand deformation under stress.

• The elastic modulus of steel is typically around 200 GPa (Gigapascals).

• It is a material property that describes the ratio of stress to strain in a material.

• Steel is known for its high elastic modulus, which allows it to resist bending and stretching.

• The elastic modulus of steel can vary depending on factors such as alloy composition and heat treatment.

• Knowing the elast...read more

Performance management methods include goal setting, feedback, performance reviews, and 360-degree feedback. The most suitable method depends on the organization's culture and goals.

• Goal setting: Establishing clear and measurable objectives for employees to work towards.

• Feedback: Providing regular feedback on performance to help employees improve.

• Performance reviews: Formal evaluations of an employee's performance against set goals and expectations.

• 360-degree feedback: Gather...read more

Manpower can be managed by proper planning, delegation, communication, training, and motivation.

• Plan ahead to determine manpower needs and allocate resources accordingly

• Delegate tasks effectively based on individual strengths and skills

• Maintain open communication channels to address any issues or concerns

• Provide training and development opportunities to enhance skills and knowledge

• Motivate employees through recognition, rewards, and a positive work environment

Identifying problem causes involves analyzing data, conducting tests, and using problem-solving techniques.

• Analyze data to identify patterns or trends that may be causing the problem.

• Conduct tests or experiments to isolate potential causes and confirm hypotheses.

• Use problem-solving techniques such as root cause analysis or fishbone diagrams to systematically identify and address the underlying issues.

• Consider factors such as design flaws, material defects, human error, or ext...read more

Maintenance of an AC motor involves regular inspection, cleaning, lubrication, and replacement of worn-out parts.

• Inspect the motor for any signs of wear and tear, such as frayed wires or damaged bearings.

• Clean the motor regularly to prevent dust and debris from accumulating and causing damage.

• Lubricate the motor's moving parts to reduce friction and extend its lifespan.

• Replace any worn-out parts, such as belts or bearings, to prevent further damage to the motor.

• Ensure that th...read more

Boiler parts include burner, combustion chamber, heat exchanger, controls, and safety devices. The process involves heating water to generate steam for various applications.

• Boiler parts: burner, combustion chamber, heat exchanger, controls, safety devices

• Process: heating water to generate steam

• Applications: power generation, heating systems, industrial processes

Civil engineering is a branch of engineering that deals with the design, construction, and maintenance of infrastructure projects.

• Involves designing and constructing buildings, bridges, roads, dams, and other structures

• Focuses on ensuring structures are safe, functional, and sustainable

• Requires knowledge of materials, construction techniques, and project management

• Involves collaboration with architects, contractors, and government agencies

• Examples include the construction of ...read more

Aluminium is extracted from its ore bauxite by electrolysis.

• Bauxite is first purified to produce alumina

• Alumina is then dissolved in molten cryolite

• Electrolysis is carried out using carbon electrodes

• Aluminium is produced at the cathode and oxygen at the anode

RCC design grade of concrete refers to the strength of the concrete mix used in reinforced concrete construction.

• RCC design grade is denoted by a number followed by 'M' (e.g. M20, M30, etc.)

• Higher grade concrete (e.g. M30) is used for structures requiring higher strength like bridges and high-rise buildings

• Lower grade concrete (e.g. M20) is used for general construction purposes like residential buildings

Negotiating salary is a common practice during the hiring process to ensure fair compensation for your skills and experience.

• Research industry standards and average salaries for your position to have a benchmark for negotiation.

• Highlight your qualifications, experience, and unique skills that make you a valuable asset to the company.

• Be prepared to discuss your salary expectations and be willing to negotiate within a reasonable range.

• Consider other benefits or perks that may b...read more

Marginal costing is a technique of cost accounting which deals with the ascertainment of marginal cost and its use in decision making.

• It is a method of cost accounting that focuses on the variable costs of production.

• It helps in determining the contribution margin of a product or service.

• It is useful in making short-term decisions such as pricing, make or buy, etc.

• It does not take into account fixed costs while calculating the cost of production.

• It is also known as variable c...read more

The working culture of the company is collaborative, innovative, and focused on continuous learning and development.

• Encourages teamwork and open communication

• Promotes creativity and thinking outside the box

• Provides opportunities for training and growth

• Values work-life balance

• Recognizes and rewards employees for their contributions

Work planning of job involves creating a detailed schedule and timeline for completing tasks and projects.

• Identify project goals and objectives

• Break down tasks into smaller components

• Estimate time and resources needed for each task

• Create a timeline with deadlines for each task

• Assign responsibilities to team members

• Regularly review and adjust the plan as needed

Safety is a top priority in all aspects of operations to ensure the well-being of employees and customers.

• Implementing and enforcing safety protocols and procedures

• Providing regular safety training for employees

• Conducting safety inspections and audits

• Promoting a safety culture among staff

• Ensuring compliance with safety regulations and standards

Slump test is a method to measure the workability of concrete by determining the consistency and stiffness of the mix.

• Slump test involves filling a cone-shaped mold with concrete, then removing the mold and measuring how much the concrete slumps or settles.

• The amount of slump indicates the workability of the concrete mix - higher slump means more workable mix.

• Slump test helps in ensuring that the concrete mix has the right consistency for proper placement and compaction.

• It is...read more

Slum test is a method used to assess the quality of concrete by observing the flow of concrete through a standard slump cone.

• Slump test is performed by filling a slump cone with freshly mixed concrete, then lifting the cone and measuring the amount of slump or settlement of the concrete.

• The result of the slump test indicates the workability of the concrete mixture, with different slumps corresponding to different levels of workability.

• A higher slump value indicates a more wor...read more