Bechtel Production Engineer Interview Questions and Answers

Aptitude was very easy and we can easily answer all the questions

A very general topics were asked and need to speak in discipline

Q1. It was most tough round and mostly students were eliminated in this round
Add your answer
Q2. The pressure of pump required to flow a liquid from bottom to up?
Ans. 
The pressure required depends on the height of the liquid column and its density.
• The pressure required is directly proportional to the height of the liquid column.

• The pressure required is also affected by the density of the liquid.

• The pressure can be calculated using the formula P = ρgh, where P is pressure, ρ is density, g is acceleration due to gravity, and h is height of the liquid column.

• The pump should be able to ...read more
Answered by AI
Add your answer
Q3. What is present above the distillation tray?
Ans. 
Vapor space is present above the distillation tray.
• The vapor space is where the vapor from the boiling liquid accumulates.

• It is important to maintain a certain level of vapor space to prevent flooding of the tray.

• The height of the vapor space can be controlled by adjusting the reflux ratio.

• The vapor space can also be used for heat transfer by introducing a cooling medium.

• Examples of equipment present in the vapor space
Answered by AI
Add your answer

Q1. Your process knowledge
Add your answer
Q2. Troubleshooting did you faced
Add your answer
Q3. Some logic based questions
Add your answer
Q4. Some questions on PLC
Add your answer
Q5. Questions based on yield and reliability
Add your answer

Q1. What is Hydrostatic Pressure
Ans. 
Hydrostatic pressure is the pressure exerted by a fluid at equilibrium at a given point within the fluid due to the force of gravity.
• Hydrostatic pressure increases with depth in a fluid due to the weight of the fluid above.

• It is calculated using the formula P = ρgh, where P is the hydrostatic pressure, ρ is the fluid density, g is the acceleration due to gravity, and h is the depth of the fluid.

• Hydrostatic pressure is ...read more
Answered by AI
Add your answer
Q2. Full form of psi
Ans. 
PSI stands for Pounds per Square Inch, a unit of pressure measurement commonly used in engineering and physics.
• PSI is used to measure pressure in various systems, such as in hydraulic systems or tire pressure.

• 1 PSI is equal to 1 pound of force applied to an area of 1 square inch.

• For example, a car tire may have a recommended PSI of 32 for optimal performance.
Answered by AI
Add your answer

Q1. Have you worked at heights?
Add your answer
Q2. Have you had expected in Steel structures
Ans. 
Yes, I have experience in designing and analyzing steel structures.
• I have worked on various projects involving steel structures such as bridges, buildings, and industrial facilities.

• I am familiar with industry standards and codes such as AISC, ASCE, and ACI.

• I have experience in using software such as STAAD.Pro and SAP2000 for structural analysis and design.

• I have also conducted site inspections and provided recommendat...read more
Answered by AI
Add your answer
Q3. Structural steel grades
Add your answer
Q4. Welding types and processes
Ans. 
Welding is a process of joining two or more metal parts by heating the surfaces to their melting points.
• There are several types of welding such as MIG, TIG, Stick, and Flux-Cored welding.

• MIG welding uses a wire electrode and a shielding gas to join two metal parts.

• TIG welding uses a tungsten electrode and a filler metal to join two metal parts.

• Stick welding uses a consumable electrode and a flux coating to join two met...read more
Answered by AI
Add your answer

Some tricky question are there major part from blood relation only

Q1. Basic of your core syllabus
Add your answer

Q1. Tell me about yourself,why do u choose this!?
Add your answer

Q1. Previous working details
Add your answer
Q2. My working skills
Add your answer
Q3. My attitude in nearby company and working experience
Add your answer
Q4. My team lead the task in 100 percent
Add your answer
Q5. Production must and should be increased in our working hours
Add your answer
Q6. How to gain the production our working hour in our team
Ans. 
To gain production in our team, we can focus on improving efficiency, setting clear goals, providing training and support, and fostering a positive work environment.
• Improve efficiency by analyzing processes and identifying areas for improvement

• Set clear goals and targets for the team to work towards

• Provide training and support to enhance skills and knowledge

• Foster a positive work environment by promoting teamwork and r
Answered by AI
Add your answer

Electrical engineer related

Aptitude was very easy and we can easily answer all the questions

A very general topics were asked and need to speak in discipline

Q1. It was most tough round and mostly students were eliminated in this round
Add your answer
Q2. The pressure of pump required to flow a liquid from bottom to up?
Ans. 
The pressure required depends on the height of the liquid column and its density.
• The pressure required is directly proportional to the height of the liquid column.

• The pressure required is also affected by the density of the liquid.

• The pressure can be calculated using the formula P = ρgh, where P is pressure, ρ is density, g is acceleration due to gravity, and h is height of the liquid column.

• The pump should be able to ...read more
Answered by AI
Add your answer
Q3. What is present above the distillation tray?
Ans. 
Vapor space is present above the distillation tray.
• The vapor space is where the vapor from the boiling liquid accumulates.

• It is important to maintain a certain level of vapor space to prevent flooding of the tray.

• The height of the vapor space can be controlled by adjusting the reflux ratio.

• The vapor space can also be used for heat transfer by introducing a cooling medium.

• Examples of equipment present in the vapor space
Answered by AI
Add your answer