Upload Button Icon Add office photos
Engaged Employer

i

This company page is being actively managed by Bajaj Auto Team. If you also belong to the team, you can get access from here

Bajaj Auto Verified Tick

Compare button icon Compare button icon Compare

Filter interviews by

Clear (1)

Bajaj Auto Production Graduate Engineer Trainee Interview Questions and Answers

Updated 25 May 2024

Bajaj Auto Production Graduate Engineer Trainee Interview Experiences

1 interview found

Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Campus Placement and was interviewed in Apr 2024. There were 3 interview rounds.

Round 1 - Aptitude Test 

Prepare Simple interest, relations, time and distance and time questions

Round 2 - Technical 

(1 Question)

  • Q1. Prepare your project and core subject well
Round 3 - HR 

(1 Question)

  • Q1. Will you be able to relocate?

Interview questions from similar companies

I was interviewed in Jul 2017.

Interview Preparation Tips

Skills: Qulity, Quick Maths

I applied via Campus Placement and was interviewed before May 2020. There was 1 interview round.

Interview Questionnaire 

1 Question

  • Q1. Tell me about your self?

Interview Preparation Tips

Interview preparation tips for other job seekers - .

I was interviewed in Dec 2016.

Interview Questionnaire 

4 Questions

  • Q1. Difference between a two stroke and a four stroke engine?
  • Ans. 

    A two-stroke engine completes a power cycle in two strokes of the piston, while a four-stroke engine completes it in four strokes.

    • Two-stroke engines have a simpler design and are lighter than four-stroke engines.

    • Two-stroke engines have a higher power-to-weight ratio but lower fuel efficiency compared to four-stroke engines.

    • Four-stroke engines have separate intake, compression, power, and exhaust strokes, while two-stro...

  • Answered by AI
  • Q2. Pictorial representation of a SI engine with valve opening and showing tdc and bdc.
  • Ans. 

    A pictorial representation of a SI engine with valve opening, TDC, and BDC.

    • SI engine stands for Spark Ignition engine, which is commonly used in gasoline-powered vehicles.

    • Valve opening refers to the movement of the intake and exhaust valves to allow fuel-air mixture in and exhaust gases out of the combustion chamber.

    • TDC (Top Dead Center) is the position of the piston at the extreme top of its stroke.

    • BDC (Bottom Dead Ce...

  • Answered by AI
  • Q3. What change will u make or what improvement will you do to any product manufactured by TVS?
  • Ans. 

    I would improve the fuel efficiency of TVS motorcycles by implementing advanced engine technology.

    • Implementing electronic fuel injection system for better fuel management

    • Introducing hybrid technology for improved mileage

    • Optimizing aerodynamics of the motorcycle for reduced drag

    • Using lightweight materials for better fuel economy

  • Answered by AI
  • Q4. Tell me about yourself.
  • Ans. 

    I am a dedicated production engineer with a strong background in manufacturing processes and quality control.

    • Graduated with a degree in Mechanical Engineering

    • Experience working in a manufacturing plant for 3 years

    • Proficient in CAD software for designing production layouts

    • Implemented lean manufacturing principles to improve efficiency

    • Led a team in reducing production downtime by 20%

  • Answered by AI

Interview Preparation Tips

Round: Test
Experience: Basic aptitude questions including a few basic technical questions
Duration: 1 hour
Total Questions: 60

Round: Technical + HR Interview
Experience: Interviewers were friendly, started with a casual talk, about themselves then asking about me, my interests and stuff, then they got into technical stuff followed by few HR questions
Tips: Be free and answer confidently

Skills: Presence Of Mind, Technical Skills, Behavioural Skills
College Name: IIT Madras
Interview experience
3
Average
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I was interviewed in Dec 2024.

Round 1 - Technical 

(5 Questions)

  • Q1. How to fill company manngement
  • Ans. 

    Filling company management positions requires identifying key skills, experience, and leadership qualities.

    • Identify the specific roles needed in the management team (e.g. CEO, CFO, COO, etc.)

    • Define the required skills, experience, and qualifications for each position

    • Conduct thorough interviews and assessments to evaluate candidates' fit for the roles

    • Consider promoting from within the company to retain institutional kno...

  • Answered by AI
  • Q2. What is the difference between an electric motor and an electric generator?
  • Ans. 

    Electric motors convert electrical energy into mechanical energy, while electric generators convert mechanical energy into electrical energy.

    • Electric motors use electrical energy to create motion, while electric generators use motion to create electrical energy.

    • Electric motors have a rotor that spins inside a stator, while electric generators have a rotor that is turned by an external force to produce electricity.

    • Examp...

  • Answered by AI
  • Q3. What tools does one need for measuring on a CNC machine in the industry,
  • Ans. 

    Common tools for measuring on a CNC machine include calipers, micrometers, height gauges, and dial indicators.

    • Calipers are used for measuring distances between two points on a workpiece.

    • Micrometers are used for precise measurements of small distances or thicknesses.

    • Height gauges are used for measuring the vertical distance from a reference point to a workpiece.

    • Dial indicators are used for measuring small distances or v...

  • Answered by AI
  • Q4. How can we explain Poke Yoka, 5S, Kaizen or Safety?
  • Ans. 

    Poke Yoka, 5S, Kaizen, and Safety are key concepts in lean manufacturing and continuous improvement.

    • Poke Yoka focuses on mistake-proofing processes to prevent errors before they occur.

    • 5S is a methodology for organizing the workplace to improve efficiency and effectiveness (Sort, Set in order, Shine, Standardize, Sustain).

    • Kaizen is the practice of continuous improvement involving all employees in making small changes fo...

  • Answered by AI
  • Q5. How does hydraulic and hydraulic machine work and on what does it work
  • Ans. 

    Hydraulic machines use fluid power to generate, control, and transmit energy.

    • Hydraulic machines work by using a liquid, typically oil, to transmit force and motion.

    • They operate based on Pascal's law, which states that pressure applied to a confined fluid is transmitted undiminished in every direction.

    • Hydraulic machines work on the principle of converting mechanical energy into hydraulic energy and vice versa.

    • Examples o...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - I aspire to take excellent care of the company and maintain honesty in my work by giving my full effort.
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Naukri.com and was interviewed before Jun 2023. There was 1 interview round.

Round 1 - HR 

(2 Questions)

  • Q1. Tell me about yourself
  • Q2. What do you know about 5 s principal

Interview Preparation Tips

Interview preparation tips for other job seekers - Don't get panic during interview be confident and give straight forward answers
Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Aptitude Test 

General Aptitude with reasoning

Round 2 - HR 

(2 Questions)

  • Q1. About Education Background
  • Q2. About individual ability and quality of decision making

Interview Preparation Tips

Interview preparation tips for other job seekers - Stay Focused and Be sincere in your work. Be clear with you own thinks

Interview Questionnaire 

1 Question

  • Q1. What is difference between production and manufacturing?
  • Ans. 

    Production is the process of creating goods or services, while manufacturing is a subset of production that involves the creation of physical goods.

    • Production involves both goods and services, while manufacturing is limited to physical goods.

    • Production is a broader term that includes manufacturing, while manufacturing is a subset of production.

    • Manufacturing involves the use of machinery and tools to create physical goo...

  • Answered by AI
Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(1 Question)

  • Q1. Engine manufacturing
Interview experience
5
Excellent
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Campus Placement and was interviewed in Mar 2024. There were 3 interview rounds.

Round 1 - Technical 

(1 Question)

  • Q1. Purpose of taking this banch
  • Ans. 

    To apply my knowledge and skills in production engineering to contribute to the success of the organization.

    • To utilize my technical expertise in optimizing production processes and improving efficiency.

    • To work collaboratively with cross-functional teams to troubleshoot issues and implement solutions.

    • To ensure quality control measures are in place to meet production goals and standards.

    • To continuously learn and adapt to...

  • Answered by AI
Round 2 - HR 

(1 Question)

  • Q1. Introduce yourself
  • Ans. 

    I am a dedicated and experienced Production Engineer with a strong background in manufacturing processes and quality control.

    • Bachelor's degree in Mechanical Engineering

    • 5+ years of experience in production engineering

    • Proficient in CAD software and manufacturing processes

    • Led a team to improve production efficiency by 20% at my previous job

  • Answered by AI
Round 3 - HR 

(1 Question)

  • Q1. Are you comfortable with location
  • Ans. 

    Yes, I am comfortable with location and willing to relocate if necessary.

    • I am open to relocating for the right opportunity

    • I have experience working in different locations

    • I am flexible and adaptable to new environments

  • Answered by AI
Contribute & help others!
anonymous
You can choose to be anonymous

Bajaj Auto Interview FAQs

How many rounds are there in Bajaj Auto Production Graduate Engineer Trainee interview?
Bajaj Auto interview process usually has 3 rounds. The most common rounds in the Bajaj Auto interview process are Aptitude Test, Technical and HR.

Recently Viewed

INTERVIEWS

Mahindra Rural Housing Finance

No Interviews

INTERVIEWS

Yhills Edutech

No Interviews

INTERVIEWS

HCL Infosystems

No Interviews

INTERVIEWS

Learning Routes

No Interviews

INTERVIEWS

Pon Pure Chemical

No Interviews

INTERVIEWS

XenonStack

No Interviews

INTERVIEWS

Morgan Stanley

No Interviews

CAMPUS PLACEMENT

School of open learning (DU), Delhi

INTERVIEWS

Quantsapp

No Interviews

INTERVIEWS

KPMG Global Services

No Interviews

Tell us how to improve this page.

Bajaj Auto Production Graduate Engineer Trainee Interview Process

based on 1 interview

Interview experience

5
  
Excellent
View more
Line Engineer
1.6k salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Manager
798 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Company Trainee
579 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Assistant Manager
421 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Diploma Trainee Engineer
356 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Explore more salaries
Compare Bajaj Auto with

Hero MotoCorp

4.1
Compare

TVS Motor

4.0
Compare

Mahindra & Mahindra

4.1
Compare

Maruti Suzuki

4.2
Compare
Did you find this page helpful?
Yes No
write
Share an Interview
Rate your experience using AmbitionBox
Terrible
Terrible
Poor
Poor
Average
Average
Good
Good
Excellent
Excellent