Filter interviews by
I applied via Walk-in and was interviewed in Jul 2023. There were 2 interview rounds.
Anchorage length is the length of reinforcement required to transfer the load from the structure to the anchor or support.
Anchorage length is determined by the type of reinforcement and the design load.
It is important to ensure that the anchorage length is sufficient to prevent failure.
Examples of anchorage length include the length of rebar embedded in concrete or the length of tendons in post-tensioned structures.
The slump test is a measure of the consistency and workability of fresh concrete.
It is used to determine the water content in the concrete mixture.
A slump cone is filled with freshly mixed concrete and then lifted vertically.
The amount of slump or settlement of the concrete is measured in millimeters.
The test helps in assessing the quality and uniformity of the concrete mix.
Different slump values are required for diffe
There are various types of slabs used in construction projects.
One-way slab: Supported by beams on two opposite sides.
Two-way slab: Supported by beams on all four sides.
Flat slab: No beams, directly supported by columns.
Ribbed slab: Consists of a series of parallel ribs.
Waffle slab: Consists of a grid of ribs and beams forming square or rectangular patterns.
I applied via Walk-in
I applied via Walk-in and was interviewed in Apr 2021. There was 1 interview round.
I applied via Naukri.com and was interviewed in Jun 2022. There were 2 interview rounds.
To conduct a slump test, fill a metal cone with concrete, compact it, remove the cone, and measure the slump.
Clean the cone and moisten it with water.
Fill the cone with concrete in three layers, compacting each layer with a rod.
Remove the cone and place it next to the slump.
Measure the difference in height between the top of the cone and the highest point of the slump.
Repeat the test at least twice and take the average
Minimum cement content for M25 Grade is 300 kg/m³.
M25 grade concrete has a minimum compressive strength of 25 MPa.
The water-cement ratio should not exceed 0.50.
The cement content can vary based on factors such as aggregate size, shape, and grading.
The cement content should be adjusted based on the results of trial mixes.
I expect a competitive salary based on industry standards and my experience.
I have researched the industry standards for QA QC Engineer salaries
I have taken into account my experience and skills
I am open to negotiation based on the specific job responsibilities and benefits package
I am looking for a fair and competitive salary that reflects my value to the company
I applied via Approached by Company and was interviewed in Mar 2022. There were 2 interview rounds.
posted on 22 Nov 2023
I applied via Naukri.com and was interviewed before Nov 2022. There were 3 interview rounds.
posted on 14 Oct 2023
I applied via Naukri.com and was interviewed in Apr 2023. There were 3 interview rounds.
Process of variation involves documenting and analyzing changes in project scope, cost, or schedule.
Variations are changes to the original scope, cost, or schedule of a project
Variations must be documented and approved by the relevant parties
The impact of variations on project budget and timeline must be analyzed
Examples of variations include design changes, unforeseen site conditions, and client requests
I applied via Walk-in and was interviewed before Nov 2023. There were 2 interview rounds.
25 Civil Engineering related Questions
posted on 11 May 2018
based on 1 interview
Interview experience
based on 1 review
Rating in categories
Senior Engineer
6
salaries
| ₹0 L/yr - ₹0 L/yr |
Civil Foreman
4
salaries
| ₹0 L/yr - ₹0 L/yr |
Assistant Accounts Manager
4
salaries
| ₹0 L/yr - ₹0 L/yr |
Engineer
3
salaries
| ₹0 L/yr - ₹0 L/yr |
Deputy Engineer
3
salaries
| ₹0 L/yr - ₹0 L/yr |
ABCI Infrastructures
VIKRAN Engineering & Exim
The Louis Berger Group
Nesma & Partners