AV Light Automotive Interview Questions and Answers

Q1. 7 QC tools explain
Ans. 
The 7 QC tools are a set of basic tools used for quality control and problem-solving in manufacturing and service industries.
• Check sheet: Used to collect and organize data in a systematic way.

• Pareto chart: Helps identify the most significant factors contributing to a problem.

• Cause and effect diagram (Fishbone diagram): Used to identify and analyze potential causes of a problem.

• Histogram: A graphical representation of d...read more
Answered by AI
Add your answer
Q2. Six big losses in quality
Ans. 
The six big losses in quality refer to specific areas where efficiency and productivity can be improved in a manufacturing process.
• 1. Downtime - time when production is stopped due to issues like equipment breakdowns or changeovers

• 2. Speed loss - inefficiencies that slow down the production process

• 3. Defects - products that do not meet quality standards and need to be reworked or scrapped

• 4. Setup and adjustment - time ...read more
Answered by AI
Add your answer
Q3. PPAP explain with demonstration
Ans. 
PPAP stands for Production Part Approval Process, a standardized process in the automotive industry to ensure suppliers meet quality standards.
• PPAP is a set of documents and procedures used to demonstrate that a supplier can consistently meet customer requirements.

• It includes documentation such as control plans, process flow diagrams, and inspection records.

• PPAP is typically required by automotive manufacturers before ...read more
Answered by AI
Add your answer
Q4. Clause of iso and iatf
Ans. 
ISO 9001 and IATF 16949 are two important quality management system standards.
• ISO 9001 focuses on general quality management principles and practices.

• IATF 16949 is specific to the automotive industry and includes additional requirements.

• Both standards emphasize the importance of customer satisfaction, continual improvement, and risk-based thinking.
Answered by AI
Add your answer
Q5. Raw material details you are aware of
Ans. 
I am aware of the raw material details such as supplier information, specifications, quality standards, and testing procedures.
• Supplier information including contact details and location

• Raw material specifications such as composition, dimensions, and tolerances

• Quality standards and certifications required for raw materials

• Testing procedures for raw materials to ensure quality and compliance
Answered by AI
Add your answer

Q1. About to Thermocouple Types
Add your answer
Q2. How Many Gate in Mould
Ans. 
The number of gates in a mould depends on the design and size of the mould, typically ranging from 1 to 16 or more.
• Number of gates in a mould can vary based on the complexity of the part being produced.

• Common numbers of gates include 1, 2, 4, 8, or 16.

• More gates may be used for larger parts or to ensure even distribution of material.

• The location of gates is important for proper filling and cooling of the mould.

• Gate des...read more
Answered by AI
Add your answer
Q3. What process of HRTC in a Mould
Ans. 
HRTC (Hot Runner Temperature Controller) is a system used in moulds to control the temperature of the hot runner system.
• HRTC helps in maintaining consistent temperature in the hot runner system of the mould.

• It ensures proper flow of molten material and prevents premature solidification.

• HRTC can be programmed to adjust temperature settings based on the specific requirements of the mould and material being used.

• Examples ...read more
Answered by AI
Add your answer
Q4. What is the Set-up valve Pin
Ans. 
The set-up valve pin is a tool used in the set-up process of machinery to ensure proper alignment and positioning.
• The set-up valve pin is a precision tool used to align components during the set-up process.

• It is typically made of hardened steel to withstand wear and tear.

• The set-up valve pin is inserted into designated holes or slots to ensure accurate positioning of parts.

• It helps in maintaining the correct alignment ...read more
Answered by AI
Add your answer
Q5. How to Polish in Tool
Ans. 
Polishing in tool involves using abrasive materials to remove imperfections and create a smooth surface.
• Start by selecting the appropriate abrasive material for the type of tool and desired finish

• Secure the tool in a vice or clamp to prevent movement during polishing

• Apply the abrasive material to the tool surface using a polishing wheel or by hand

• Use a consistent pressure and motion to ensure even polishing

• Inspect the ...read more
Answered by AI
Add your answer

Q1. Tell me how you evaluate your department performance
Add your answer

Q1. Technical drawing
Add your answer

The determine a person ability in a practical skills or field.

A group discussion the candidate personaliy traits and skills

A particular instance of something used or analysed in ordered to issulrate a thesis principal

Q1. Interview that are in person and occur between one interview What are application are expecting What expected the candidate
Add your answer
Q2. What expected the candidate
Add your answer
Q3. How many years experience
Add your answer
Q4. What type of machine experience
Ans. 
I have experience working with various types of machines including pumps, compressors, turbines, and conveyors.
• Experience with maintenance and repair of pumps, compressors, turbines, and conveyors

• Familiarity with hydraulic and pneumatic systems

• Knowledge of electrical and mechanical systems

• Experience with troubleshooting and problem-solving

• Ability to read and interpret technical drawings and schematics

• Examples: Maintain...read more
Answered by AI
Add your answer
Q5. What u getting in our company
Add your answer

Q1. Uses of autocad in engeneering
Ans. 
AutoCAD is a computer-aided design software widely used in engineering for creating precise and detailed 2D and 3D drawings.
• Creating accurate and detailed technical drawings

• Designing and drafting architectural plans

• Producing engineering diagrams and schematics

• Generating 3D models for visualization and analysis

• Creating construction and manufacturing blueprints

• Simulating and testing designs before implementation

• Collabora...read more
Answered by AI
View 3 more answers
Q2. What is the full form of CAD
Ans. 
CAD stands for Computer-Aided Design.
• CAD is a technology that uses computer systems to assist in the creation, modification, analysis, or optimization of a design.

• It is widely used in various industries such as architecture, engineering, and manufacturing.

• CAD software allows designers to create 2D or 3D models of products or structures.

• It helps in improving design accuracy, reducing errors, and increasing productivity.

• ...read more
Answered by AI
View 1 more answer
Q3. What is tolerance in short
Ans. It is the difference between upper limit and lower limit
Answered Anonymously
Add your answer
Q4. Name types of fit ? Tell me any two types
Ans. 
Types of fit include clearance fit, interference fit, transition fit, etc.
• Clearance fit: parts are intended to have a gap between them, such as a shaft and a hole

• Interference fit: parts are intended to be pressed or forced together, such as a bearing and a shaft

• Transition fit: parts have both clearance and interference, such as a piston and a cylinder

• Other types of fit include force fit, shrink fit, and sliding fit
Answered by AI
Add your answer
Q5. Explain in short high pressure die casting? Explain
Ans. 
High pressure die casting is a metal casting process in which molten metal is injected into a steel mold under high pressure.
• Molten metal is injected into a steel mold under high pressure

• The mold is designed to create complex shapes with high accuracy

• The process is used to produce parts with high strength and dimensional accuracy

• Commonly used metals include aluminum, zinc, and magnesium

• Used in automotive, aerospace, an
Answered by AI
Add your answer