Filter interviews by
I applied via Walk-in and was interviewed before Mar 2019. There were 3 interview rounds.
Chromatography is a technique used to separate and analyze mixtures of substances based on their different properties.
Chromatography involves a stationary phase and a mobile phase.
The stationary phase is a solid or liquid material that retains the components of the mixture to be separated.
The mobile phase is a liquid or gas that carries the mixture through the stationary phase.
Different components of the mixture intera...
pH is a measure of the acidity or alkalinity of a solution.
pH stands for 'potential of hydrogen'.
It is a logarithmic scale ranging from 0 to 14.
A pH of 7 is considered neutral, below 7 is acidic, and above 7 is alkaline.
Each unit change in pH represents a tenfold change in acidity or alkalinity.
pH is commonly used in various fields such as chemistry, biology, and environmental science.
Nitration reaction is a chemical reaction in which a nitro group (-NO2) is introduced into a molecule.
Nitration is a type of electrophilic aromatic substitution reaction.
It involves the substitution of a hydrogen atom on an aromatic ring with a nitro group.
The reaction is typically carried out using a mixture of nitric acid and sulfuric acid as the nitrating agent.
Nitration reactions are commonly used in the synthesis ...
Karl Fischer reaction is a method for determining the water content in a sample. The instrument used for this reaction is calibrated using standard solutions.
Karl Fischer reaction is a chemical reaction that involves the titration of water with iodine.
It is commonly used in analytical chemistry to measure the moisture content in various substances.
The reaction is based on the principle that iodine reacts with water to ...
Normality refers to the state of being normal or conforming to a standard or norm.
Normality is a concept used in various fields to define what is considered typical or expected.
It is often used to describe the behavior, characteristics, or values that are within the range of what is considered normal.
Normality can vary depending on the context and can be subjective or objective.
In statistics, normality refers to the di...
The main components of HPLC are the mobile phase, stationary phase, pump, injector, column, detector, and data acquisition system.
Mobile phase: The solvent or mixture of solvents that carries the sample through the system.
Stationary phase: The solid or liquid phase that retains the analytes based on their interactions.
Pump: Responsible for delivering the mobile phase at a constant flow rate.
Injector: Introduces the sam...
I applied via Referral and was interviewed in Apr 2024. There were 3 interview rounds.
I want to come back to utilize my skills and experience in a new challenge. I will manage by delegating tasks effectively and setting clear goals.
I have a passion for leadership and enjoy the challenge of managing a team
I have valuable experience in business that I believe can benefit this role
I am excited about the opportunity to contribute to the success of the company
I plan to manage by setting clear expectations, d...
I will assess the situation, identify the root cause of the issue, develop a plan of action, communicate effectively with the team, and monitor progress closely.
Assess the current situation and identify the root cause of the problem
Develop a plan of action to address the issue and set clear objectives
Communicate effectively with the team to ensure everyone is on the same page
Monitor progress closely and make adjustment...
I will work closely with the distributor to understand the reasons for not doing primary and provide support. I will focus on driving secondary sales through targeted promotions and incentives.
Communicate with the distributor to identify the challenges they are facing in doing primary sales
Provide necessary support and training to the distributor to improve their primary sales performance
Implement targeted promotions a...
I will adapt my management style to the specific needs and challenges of the sector, focusing on building relationships and understanding the industry dynamics.
Research and understand the unique characteristics of the sector
Build relationships with key stakeholders in the sector
Adapt management strategies to align with sector-specific challenges
Stay updated on industry trends and developments
Implement innovative soluti
My approach to enhance business would involve analyzing market trends, identifying opportunities for growth, implementing strategic marketing initiatives, and fostering strong relationships with clients and stakeholders.
Conduct market research to identify trends and opportunities
Develop and implement strategic marketing initiatives to attract new customers
Build strong relationships with clients and stakeholders to incr...
Managed production team, optimized processes, increased efficiency by 20%, reduced costs by 15%
Led a team of 30 production staff to meet daily production targets
Implemented new production processes resulting in a 20% increase in efficiency
Identified cost-saving opportunities and reduced production costs by 15%
Streamlined inventory management system to minimize waste and improve inventory turnover rate
I applied via Recruitment Consulltant and was interviewed in Apr 2024. There were 2 interview rounds.
Reaction calorimetry is a technique used to measure the heat released or absorbed during a chemical reaction.
Reaction calorimetry involves monitoring temperature changes in a reaction vessel to calculate heat flow.
It is used to study reaction kinetics, thermodynamics, and safety aspects of chemical processes.
Examples include determining heat of reaction, heat capacity of reactants, and thermal stability of products.
PSM Elements refer to the key components of Process Safety Management system in an organization.
Process Safety Information
Process Hazard Analysis
Operating Procedures
Training
Mechanical Integrity
Management of Change
Pre-Startup Safety Review
Emergency Planning and Response
Compliance Audits
Incident Investigation
MOC stands for Management of Change, a process used to ensure that changes in the workplace do not negatively impact safety, health, or the environment.
MOC is a systematic approach to managing changes in processes, equipment, personnel, or procedures.
It involves assessing potential risks, communicating changes to relevant stakeholders, and implementing controls to mitigate any negative impacts.
Examples of changes that ...
MSDS sections include product identification, composition/information on ingredients, hazards identification, first-aid measures, fire-fighting measures, and more.
Product identification: Name, manufacturer, supplier
Composition/information on ingredients: Chemical ingredients, CAS numbers
Hazards identification: Physical and health hazards
First-aid measures: Necessary first-aid instructions
Fire-fighting measures: Fire ha
A licence for methanol storage typically requires a permit from local authorities and compliance with safety regulations.
Permit from local authorities is usually required for methanol storage
Compliance with safety regulations such as fire codes and environmental regulations is necessary
Training and certification for handling hazardous materials may also be required
Seeking new challenges and growth opportunities in a different work environment.
Desire for career advancement
Opportunity to learn new skills and techniques
Seeking a more supportive or collaborative work culture
Atul interview questions for popular designations
I applied via Recruitment Consulltant and was interviewed in Jul 2024. There was 1 interview round.
Get interview-ready with Top Atul Interview Questions
I have over 5 years of experience in retail management, overseeing multiple stores and leading teams to achieve sales targets.
Managed a team of 20+ employees across 5 retail locations
Implemented sales strategies that resulted in a 15% increase in revenue
Trained new staff on product knowledge and customer service standards
Handled inventory management and ensured stock levels were maintained
Resolved customer complaints a
I applied via Approached by Company and was interviewed in Mar 2024. There were 4 interview rounds.
1.Cognitive ability tests.
2. Personality tests.
3. Skill-specific tests.
4. Achievement tests.
5. Emotional intelligence tests.
1. Informal, conversational tone
2. Active listening and participation
3. Sharing of diverse perspectives and ideas
4. Open-ended questions and topics
5. Collaborative and respectful atmosphere
The job expectations and responsibilities for a Security Incharge include overseeing security operations, implementing security measures, training security staff, and ensuring compliance with safety protocols.
Overseeing security operations to ensure the safety and security of the premises
Implementing security measures such as access control systems, surveillance cameras, and security patrols
Training security staff on s...
Pramotion discussion
I applied via Approached by Company and was interviewed in Dec 2023. There were 2 interview rounds.
Various types of pumps, reactors, and reactions are handled in the role of Senior Executive.
Types of pumps include centrifugal pumps, positive displacement pumps, and diaphragm pumps.
Reactors can be batch reactors, continuous stirred tank reactors, or plug flow reactors.
Types of reactions handled may include oxidation, reduction, hydrolysis, and polymerization.
Examples: Centrifugal pump, batch reactor, oxidation reacti
To find the difference in Air and N2 in a plant, analyze the composition and properties of each gas.
Analyze the composition of Air (mainly nitrogen and oxygen) and N2 (pure nitrogen)
Measure the concentration of each gas in the plant
Consider the properties of each gas such as density, boiling point, and reactivity
Use gas detection equipment to identify and quantify the presence of Air and N2
Our plant generates approximately 100 tons of waste per month.
We have implemented waste reduction strategies to minimize our environmental impact.
We segregate waste into different categories for proper disposal and recycling.
Regular waste audits are conducted to track and analyze our waste generation.
Examples: paper waste, plastic waste, organic waste, hazardous waste
HAZOP focuses on identifying potential hazards in a process, while HIRA assesses risks associated with those hazards.
HAZOP stands for Hazard and Operability Study, which is a structured technique used to identify potential hazards in a process plant.
HIRA stands for Hazard Identification and Risk Assessment, which involves assessing the risks associated with identified hazards.
HAZOP is more focused on identifying specif...
I was interviewed in Aug 2024.
The job profile of a Production Supervisor involves overseeing the manufacturing process, ensuring production goals are met, and managing a team of workers.
Overseeing the manufacturing process to ensure efficiency and quality
Setting production goals and deadlines for the team to meet
Managing a team of workers, including hiring, training, and scheduling
Monitoring inventory levels and ordering supplies as needed
Ensuring ...
I applied via Recruitment Consulltant and was interviewed in Aug 2023. There were 3 interview rounds.
Top trending discussions
The duration of Atul interview process can vary, but typically it takes about less than 2 weeks to complete.
based on 85 interviews
Interview experience
Senior Executive
571
salaries
| â‚ą0 L/yr - â‚ą0 L/yr |
Assistant Manager
489
salaries
| â‚ą0 L/yr - â‚ą0 L/yr |
Joint Manager
251
salaries
| â‚ą0 L/yr - â‚ą0 L/yr |
Deputy Manager
244
salaries
| â‚ą0 L/yr - â‚ą0 L/yr |
Executive
117
salaries
| â‚ą0 L/yr - â‚ą0 L/yr |
Aditya Birla Group
Reliance Industries
Tata Group
Mahindra & Mahindra