AmbitionBox
Interview Questions
- Reviews
- Salaries
- Interview Questions
- About Company
- Benefits
- Jobs
- Office Photos
- Community
Add office photos
i
Ather Energy
Compare
Filter interviews by
Ather Energy VMC Programmer Interview Questions and Answers
Ather Energy VMC Programmer Interview Experiences
1 interview found
Interview Questionnaire
2 Questions
- Q1. How to do program to the proto parts with setting of fixtures?
- Ans.
Program proto parts with fixture settings by following these pointers.
Identify the correct fixture for the proto part
Set the fixture on the VMC machine
Load the proto part onto the fixture
Write the program for the proto part
Test the program on the proto part
Make necessary adjustments to the program or fixture if needed
- Q2. You know operating of machine jyothi- and makino?
- Ans.
Yes, I am familiar with operating the machine jyothi and makino.
I have experience operating both jyothi and makino machines.
I am proficient in setting up and programming these machines.
I have successfully completed projects using jyothi and makino machines.
I am familiar with the specific features and capabilities of these machines.
Interview Preparation Tips
Interview questions from similar companies
Interview Questionnaire
3 Questions
- Q1. Reverse a linked list
- Ans.
Reverse a linked list
Iterative approach: Traverse the list and change the pointers to reverse the list
Recursive approach: Recursively reverse the rest of the list and change the pointers
Use a stack to push all the nodes and then pop them to create a reversed list
- Q2. Implementation of stack
- Ans.
Stack is a data structure that follows Last In First Out (LIFO) principle.
Stack can be implemented using arrays or linked lists.
Push operation adds an element to the top of the stack.
Pop operation removes the top element from the stack.
Peek operation returns the top element without removing it.
Stack overflow occurs when the stack is full and push operation is performed.
Stack underflow occurs when the stack is empty and
- Q3. Queues implementation
- Ans.
Queues are a data structure that follows the FIFO principle.
Queues can be implemented using arrays or linked lists.
Enqueue adds an element to the end of the queue, while dequeue removes an element from the front.
Peek returns the element at the front of the queue without removing it.
Queues are used in scheduling, buffering, and breadth-first search algorithms.
Skills evaluated in this interview
I applied via Referral and was interviewed before Feb 2021. There was 1 interview round.
(4 Questions)
- Q1. My job Responsibility and my job profile.
- Q2. Line balancing for me.
- Ans.
Line balancing is the process of optimizing workstations in a production line to minimize idle time and maximize efficiency.
It involves analyzing the production process and identifying bottlenecks
Tasks are then rearranged to balance the workload across workstations
The goal is to achieve a smooth and continuous flow of work
Example: In a car assembly line, line balancing would involve ensuring that each workstation has a...
- Q3. Rejected and part analysis for everyone.
- Q4. Check sheet Filling.
Interview Preparation Tips
I applied via Referral and was interviewed in Jul 2021. There was 1 interview round.
Interview Questionnaire
1 Question
- Q1. Work experience related questions
Interview Preparation Tips
Selected
I applied via Referral and was interviewed before Sep 2023. There were 2 interview rounds.
Question related to NPD
(3 Questions)
- Q1. About GD&T symbol
- Q2. About Inspection tools
- Q3. How casting made
- Ans.
Casting is the process of pouring molten metal into a mold to create a specific shape.
Casting involves creating a mold, melting the metal, pouring the metal into the mold, and allowing it to cool and solidify.
Different types of casting methods include sand casting, investment casting, die casting, and continuous casting.
Casting is used in various industries such as automotive, aerospace, and jewelry making.
Interview Preparation Tips
I applied via Recruitment Consultant and was interviewed before Apr 2020. There was 1 interview round.
Interview Questionnaire
1 Question
- Q1. Basics of C and one linked list problem
Interview Preparation Tips
I applied via Naukri.com and was interviewed in May 2019. There were 3 interview rounds.
Interview Questionnaire
4 Questions
- Q1. Introduce Yourself
- Q2. Previous Experience
- Q3. Expectations
- Q4. Subject detailing
Interview Preparation Tips
I applied via Company Website and was interviewed before Mar 2020. There were 3 interview rounds.
Interview Questionnaire
3 Questions
- Q1. Engine Testing & Development related
- Q2. Engine Testing realated software knowledge
- Q3. Vehicle testing experience related
Interview Preparation Tips
Interview Questionnaire
1 Question
- Q1. 1.verniar caliper count
- Ans.
Vernier caliper count measures the distance between two opposite sides of an object.
Vernier calipers are used to measure the internal and external dimensions of an object.
They can also measure the depth and steps of an object.
The count on a vernier caliper is typically in millimeters or inches.
To use a vernier caliper, the jaws are placed around the object and the reading is taken from the scale.
The vernier scale allow...
Interview Preparation Tips
Trainee Interview Questions & Answers
Daimler India Commercial Vehicles
Patibandla Ashok Kumar
posted on 5 Jun 2023
Selected
I applied via Walk-in and was interviewed before Jun 2022. There were 4 interview rounds.
Numbers sheet that given to clear the decoding
Technical questions
(2 Questions)
- Q1. Face to face interview questions about qualifications and family
- Q2. What's the difference between bolt and nut?
- Ans.
Bolts are externally threaded fasteners used with nuts to join two or more components together.
Bolts have a head on one end and a threaded portion on the other end
Nuts are internally threaded fasteners that are used in conjunction with bolts
Bolts are inserted through pre-drilled holes in the components being joined
Nuts are tightened onto the threaded portion of the bolt to secure the components together
Interview Preparation Tips
Ather Energy Interview FAQs
Tell us how to improve this page.
Ather Energy Interviews By Designations
- Ather Energy Manager Interview Questions
- Ather Energy Graduate Engineer Trainee (Get) Interview Questions
- Ather Energy Territory Sales Manager Interview Questions
- Ather Energy Quality Analyst Interview Questions
- Ather Energy Data Analyst Interview Questions
- Ather Energy System Software Engineer Interview Questions
- Ather Energy Associate Manager Interview Questions
- Ather Energy Engineer Trainee Interview Questions
- Show more
Interview Questions for Popular Designations
- CNC Programmer Interview Questions
- VMC Operator Interview Questions
- Programmer Analyst Interview Questions
- CNC VMC Operator Interview Questions
- VMC Programmer and Setter Interview Questions
- Programmer Analyst Trainee Interview Questions
- Programmer Interview Questions
- VMC Machine Operator Interview Questions
- Show more
Interview Questions from Similar Companies
Fast track your campus placements
Ather Energy VMC Programmer Reviews and Ratings
based on 1 review
Rating in categories
|
Associate Manager
121
salaries
|  ₹8 L/yr - ₹25 L/yr |
|
Manager
72
salaries
| ₹11.6 L/yr - ₹28.2 L/yr |
|
Area Sales Manager
64
salaries
| ₹12 L/yr - ₹29 L/yr |
|
Program Manager
63
salaries
| ₹10.8 L/yr - ₹27 L/yr |
|
Senior Manager
62
salaries
| ₹16 L/yr - ₹42 L/yr |
Escorts Kubota Limited
Sonalika Tractors
Force Motors
Yamaha Motor
- Home >
- Interviews >
- Ather Energy Interview Questions >
- Ather Energy VMC Programmer Interview Questions
