i
Asteria Aerospace
Filter interviews by
I applied via Approached by Company and was interviewed in Jul 2023. There were 3 interview rounds.
I applied via asteria.in and was interviewed in Apr 2023. There were 4 interview rounds.
This was manager round
I applied via Company Website and was interviewed before Sep 2022. There were 4 interview rounds.
Harness drawing is a detailed diagram or schematic representation of an electrical wiring harness.
Harness drawing shows the layout and connections of wires, cables, and connectors in a system.
It helps in understanding the routing of wires and the overall design of the electrical system.
Harness drawings are commonly used in automotive, aerospace, and industrial applications.
They are essential for troubleshooting, mainte
One tool for harness drawing is AutoCAD Electrical.
AutoCAD Electrical is a software tool specifically designed for creating electrical control systems, including harness drawings.
It allows users to easily generate and update wire harness drawings, with features such as automatic wire numbering and component tagging.
Other tools for harness drawing include SolidWorks Electrical and Zuken E3.series.
Connectors are selected based on factors like compatibility, durability, cost, and ease of use.
Consider the type of devices being connected and the required signal or power transmission.
Check for compatibility in terms of size, shape, and electrical specifications.
Evaluate the durability of the connector for the intended application.
Compare costs of different connectors while ensuring quality.
Ease of use and installati...
Wire selection is based on factors like current rating, insulation material, and environmental conditions.
Consider the current rating of the wire to ensure it can handle the load.
Choose the appropriate insulation material based on the application (e.g. PVC, Teflon).
Take into account environmental conditions like temperature and moisture resistance.
Refer to wire gauge charts to determine the right size for the current r...
There are two main types of communications in electronics: CAN (Controller Area Network) and I2C (Inter-Integrated Circuit).
CAN (Controller Area Network) is a robust serial communication protocol commonly used in automotive and industrial applications.
I2C (Inter-Integrated Circuit) is a multi-master, multi-slave serial communication protocol used for connecting low-speed peripherals.
CAN communication allows for high-sp...
IPC-A-610 is the standard to follow for wire to wire soldering.
IPC-A-610 is the Acceptability of Electronic Assemblies standard
It provides guidelines for soldering and other assembly processes
Examples of criteria include acceptable solder joint size and shape
Soldering is better for permanent connections, while crimping is better for temporary or removable connections.
Soldering provides a stronger and more reliable connection compared to crimping.
Soldering is better for applications where the connection needs to withstand high temperatures or vibrations.
Crimping is quicker and easier for temporary connections or when frequent disconnections are needed.
Crimping is often used...
In Excel, you can add a watermark by inserting a text or image behind the content of the spreadsheet.
Go to the 'Page Layout' tab in Excel.
Click on 'Watermark' in the 'Page Background' group.
Select either 'Custom Watermark' to add a text watermark or 'Picture Watermark' to add an image watermark.
Choose the desired text or image for the watermark.
Adjust the size, transparency, and position of the watermark as needed.
I would rate myself a 4 out of 5 in harness design.
I have experience designing harnesses for various projects during my studies and internships.
I have a good understanding of the principles and best practices in harness design.
I have received positive feedback on my harness designs from supervisors and colleagues.
I am always looking to improve my skills and stay updated on the latest developments in harness design.
You need to make one line diagram.
Asteria Aerospace interview questions for popular designations
Top trending discussions
posted on 16 Oct 2024
It was easy for me question were in easy to medium range
I am a passionate software developer with 5 years of experience in building web applications using various technologies.
Experienced in developing web applications using HTML, CSS, JavaScript, and frameworks like React and Angular
Proficient in backend development with Node.js and databases like MongoDB and MySQL
Familiar with version control systems like Git and deployment tools like Docker
Strong problem-solving skills a
posted on 23 May 2024
I applied via LinkedIn and was interviewed in Apr 2024. There was 1 interview round.
Python coding level of 2 sections
I applied via Company Website
Problem statement related to the specified field
I applied via Pod and was interviewed in Apr 2024. There were 2 interview rounds.
It has three sections basic aptitude only
Forces acting on a rocket include thrust, weight, drag, and lift.
Thrust is the force propelling the rocket forward.
Weight is the force pulling the rocket down due to gravity.
Drag is the resistance force acting opposite to the rocket's motion.
Lift is the aerodynamic force generated by the rocket's shape to counteract weight.
Other forces may include gravity, air resistance, and external forces.
Stress strain curve shows the relationship between stress (force applied) and strain (resulting deformation) in a material.
Stress strain curve is a graphical representation of how a material behaves under loading.
It typically shows the stress on the y-axis and strain on the x-axis.
The curve usually consists of three main regions: elastic deformation, plastic deformation, and fracture.
Elastic deformation is the initial ...
Modes of heat transfer include conduction, convection, and radiation.
Conduction: Heat transfer through direct contact between particles or objects (e.g. touching a hot pan)
Convection: Heat transfer through the movement of fluids or gases (e.g. boiling water)
Radiation: Heat transfer through electromagnetic waves (e.g. feeling the warmth of the sun)
Viscosity is a measure of a fluid's resistance to flow.
Viscosity is often described as the thickness or stickiness of a fluid.
It is influenced by factors such as temperature and pressure.
High viscosity fluids flow slowly, while low viscosity fluids flow quickly.
Examples of high viscosity fluids include honey and molasses, while water has low viscosity.
Ductile materials exhibit large deformation before failure, while brittle materials fail suddenly without significant deformation.
Ductile materials show a gradual increase in stress followed by necking before failure.
Brittle materials have a steep stress-strain curve and fail abruptly without warning.
Examples of ductile materials include metals like copper and aluminum.
Examples of brittle materials include ceramics and
posted on 24 Jul 2021
Fuselage station refers to a specific location on an aircraft's fuselage.
Fuselage station is a measurement of distance along the fuselage, typically measured in inches or millimeters.
It is used as a reference point for various components and systems on the aircraft.
For example, an aircraft's doors, windows, wings, and tail are all located at specific fuselage stations.
Fuselage station 0 is usually defined as the refere...
Butt line is not a commonly used term. It could refer to the line where the buttocks meet the thighs.
Butt line is not a medical term.
It could refer to the line where the buttocks meet the thighs.
It is not a commonly used term and may have different interpretations depending on the context.
Water line refers to the pipe or tubing that carries water from the main supply to a building or property.
Water line is an essential component of a plumbing system.
It can be made of various materials such as copper, PVC, or galvanized steel.
The size of the water line depends on the water demand of the building or property.
Water lines can be underground or above ground.
A water line break or leak can cause significant da
The question is unclear and seems to contain errors.
The question may be referring to 'fast angle' and 'third angle projection' in technical drawing.
Fast angle refers to a type of projection where the object is viewed from an angle that is not perpendicular to any of its faces.
Third angle projection is a method of drawing 3D objects in which the object is placed in a box with three sides and projected onto a plane.
Witho...
A rivet is a metal fastener used to join two or more pieces of material together permanently.
Rivets are commonly used in construction, automotive, and aerospace industries.
They are inserted into pre-drilled holes and then deformed to hold the materials together.
Rivets can be made of various materials including aluminum, steel, and copper.
They are often used in place of screws or bolts when a permanent joint is required...
The number of cutting angles in a reamer varies depending on the type and size of the reamer.
The number of cutting angles can range from 2 to 6.
The cutting angles are designed to remove material from the workpiece as the reamer rotates.
The cutting angles can be straight or spiral, and can be symmetrical or asymmetrical.
The number and angle of the cutting edges can affect the surface finish and accuracy of the hole.
Exam...
Drill bits can have various cutting angles depending on their purpose and material.
The most common cutting angle for general purpose drill bits is 118 degrees.
Drill bits for harder materials like metal may have a sharper angle of 135 degrees.
Masonry drill bits have a flatter angle of 90 degrees to prevent cracking of the material.
The cutting angle affects the efficiency and precision of the drilling process.
Drill bits are made by various manufacturers using different materials and designs.
Drill bits can be made from high-speed steel, cobalt, carbide, or diamond.
Manufacturers include DeWalt, Bosch, Milwaukee, and Irwin.
The design of the drill bit can vary depending on the intended use, such as twist bits, spade bits, or hole saws.
The number of cutting files depends on the project requirements and design complexity.
The number of cutting files can range from a few to hundreds or even thousands.
It also depends on the type of cutting machine being used.
For example, a laser cutting machine may require different files than a CNC router.
The number of cutting files can also vary based on the material being cut and its thickness.
It is important to have ...
Some of the top questions asked at the Asteria Aerospace interview -
based on 6 interviews
Interview experience
based on 86 reviews
Rating in categories
4-6 Yrs
Not Disclosed
0-6 Yrs
Not Disclosed
Associate Engineer
19
salaries
| ₹0 L/yr - ₹0 L/yr |
Associate Engineer 1
15
salaries
| ₹0 L/yr - ₹0 L/yr |
Quaity Control Engineer
7
salaries
| ₹0 L/yr - ₹0 L/yr |
GIS Analyst
7
salaries
| ₹0 L/yr - ₹0 L/yr |
Business Development Manager
7
salaries
| ₹0 L/yr - ₹0 L/yr |
TeamIndus
Skyroot Aerospace
Bellatrix Aerospace
Pixxel Space