Upload Button Icon Add office photos

Ashok Leyland

Compare button icon Compare button icon Compare

Filter interviews by

Ashok Leyland Mechanical Engineer Interview Questions and Answers

Updated 9 Sep 2020

Ashok Leyland Mechanical Engineer Interview Experiences

1 interview found

I applied via Campus Placement and was interviewed in Mar 2020. There were 5 interview rounds.

Interview Questionnaire 

1 Question

  • Q1. What is lower limit and upper limit?
  • Ans. 

    Lower limit and upper limit are the minimum and maximum values within a given range or set of values.

    • Lower limit refers to the minimum value that can be reached or considered.

    • Upper limit refers to the maximum value that can be reached or considered.

    • These limits define the boundaries or constraints of a particular system or measurement.

    • For example, in temperature measurement, the lower limit could be -40 degrees Celsius...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Be calm.. If u don't pass out this interview, there are several other companies.

Interview questions from similar companies

I was interviewed in Jul 2017.

Interview Preparation Tips

Skills: Qulity, Quick Maths

I applied via Campus Placement and was interviewed before May 2020. There was 1 interview round.

Interview Questionnaire 

1 Question

  • Q1. Tell me about your self?

Interview Preparation Tips

Interview preparation tips for other job seekers - .

I was interviewed in Dec 2016.

Interview Questionnaire 

4 Questions

  • Q1. Difference between a two stroke and a four stroke engine?
  • Ans. 

    A two-stroke engine completes a power cycle in two strokes of the piston, while a four-stroke engine completes it in four strokes.

    • Two-stroke engines have a simpler design and are lighter than four-stroke engines.

    • Two-stroke engines have a higher power-to-weight ratio but lower fuel efficiency compared to four-stroke engines.

    • Four-stroke engines have separate intake, compression, power, and exhaust strokes, while two-stro...

  • Answered by AI
  • Q2. Pictorial representation of a SI engine with valve opening and showing tdc and bdc.
  • Ans. 

    A pictorial representation of a SI engine with valve opening, TDC, and BDC.

    • SI engine stands for Spark Ignition engine, which is commonly used in gasoline-powered vehicles.

    • Valve opening refers to the movement of the intake and exhaust valves to allow fuel-air mixture in and exhaust gases out of the combustion chamber.

    • TDC (Top Dead Center) is the position of the piston at the extreme top of its stroke.

    • BDC (Bottom Dead Ce...

  • Answered by AI
  • Q3. What change will u make or what improvement will you do to any product manufactured by TVS?
  • Ans. 

    I would improve the fuel efficiency of TVS motorcycles by implementing advanced engine technology.

    • Implementing electronic fuel injection system for better fuel management

    • Introducing hybrid technology for improved mileage

    • Optimizing aerodynamics of the motorcycle for reduced drag

    • Using lightweight materials for better fuel economy

  • Answered by AI
  • Q4. Tell me about yourself.
  • Ans. 

    I am a dedicated production engineer with a strong background in manufacturing processes and quality control.

    • Graduated with a degree in Mechanical Engineering

    • Experience working in a manufacturing plant for 3 years

    • Proficient in CAD software for designing production layouts

    • Implemented lean manufacturing principles to improve efficiency

    • Led a team in reducing production downtime by 20%

  • Answered by AI

Interview Preparation Tips

Round: Test
Experience: Basic aptitude questions including a few basic technical questions
Duration: 1 hour
Total Questions: 60

Round: Technical + HR Interview
Experience: Interviewers were friendly, started with a casual talk, about themselves then asking about me, my interests and stuff, then they got into technical stuff followed by few HR questions
Tips: Be free and answer confidently

Skills: Presence Of Mind, Technical Skills, Behavioural Skills
College Name: IIT Madras

Interview Preparation Tips

Round: Group Activity
Experience: Machine maintenance,, machine PM, work planning, kayzen work, modification work etc.

I applied via Walk-in and was interviewed before Feb 2020. There was 1 interview round.

Interview Questionnaire 

6 Questions

  • Q1. Where do u live?
  • Q2. Now where are u saty
  • Q3. Asked the ohm's low
  • Q4. Explain 3ph induction motor working
  • Ans. 

    3ph induction motor works on the principle of electromagnetic induction to convert electrical energy into mechanical energy.

    • Three-phase AC power is supplied to the stator winding, creating a rotating magnetic field.

    • This rotating magnetic field induces a current in the rotor, which in turn creates its own magnetic field.

    • The interaction between the stator and rotor magnetic fields causes the rotor to rotate, converting e

  • Answered by AI
  • Q5. Drow star delta connection
  • Q6. 1 HP is equal how many watt
  • Ans. 

    1 HP is equal to 746 watts.

    • HP stands for horsepower, a unit of power used in the automotive and manufacturing industries.

    • Watt is the SI unit of power.

    • The conversion factor between HP and watt is 746.

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Give any ans in full of confidence.
Don't be silence say samthing of every question.

I applied via Recruitment Consultant and was interviewed in Jul 2020. There were 3 interview rounds.

Interview Questionnaire 

1 Question

  • Q1. Diff incremental and absolute encoder
  • Ans. 

    Incremental encoder measures relative position changes while absolute encoder measures absolute position.

    • Incremental encoder generates a series of pulses as the shaft rotates, which are used to determine the relative position change.

    • Absolute encoder generates a unique digital code for each shaft position, providing absolute position information.

    • Incremental encoder is simpler and less expensive, while absolute encoder i...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Do the basis of the CNC machine.

I applied via Campus Placement and was interviewed before Aug 2021. There were 4 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Aptitude Test 

(1 Question)

  • Q1. Objective type question of 50 marks
Round 3 - Aptitude Test 

20 marks objective questions for aptitude test

Round 4 - One-on-one 

(1 Question)

  • Q1. Question asked according to subject such as Engineering Drawing, Production Process etc.

Interview Preparation Tips

Interview preparation tips for other job seekers - you should prepare answers for the question according to your branch paper. All question were asked from my subject paper of all semester. You must be able to communicate properly with interviewer.

I applied via Company Website and was interviewed before Dec 2020. There were 3 interview rounds.

Interview Questionnaire 

6 Questions

  • Q1. What's your background?
  • Q2. Why i intrested work in your company?
  • Ans. Because self career and company growth
  • Answered by Virendra Kumar Prajapati
  • Q3. What is your strength?
  • Q4. Confidence , work & handling
  • Q5. What is your designation in your present company?
  • Q6. Production supervisor

Interview Preparation Tips

Interview preparation tips for other job seekers - Very nice and small. Please give me one chance sir.

I applied via Naukri.com and was interviewed before May 2021. There were 2 interview rounds.

Round 1 - One-on-one 

(3 Questions)

  • Q1. Tell me something about yourself
  • Q2. Roles and responsibilities
  • Q3. Vsm, kaizen, poka yoke, lean
Round 2 - HR 

(1 Question)

  • Q1. Your personal check only

Interview Preparation Tips

Interview preparation tips for other job seekers - Be prepared for all the stuff you have mention in your resume

Tell us how to improve this page.

Ashok Leyland Mechanical Engineer Interview Process

based on 3 interviews

Interview experience

5
  
Excellent
View more
Ashok Leyland Mechanical Engineer Salary
based on 141 salaries
₹1 L/yr - ₹6 L/yr
38% less than the average Mechanical Engineer Salary in India
View more details

Ashok Leyland Mechanical Engineer Reviews and Ratings

based on 40 reviews

4.2/5

Rating in categories

4.5

Skill development

4.0

Work-life balance

3.8

Salary

3.6

Job security

4.4

Company culture

3.6

Promotions

4.5

Work satisfaction

Explore 40 Reviews and Ratings
Deputy Manager
1.2k salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Assistant Manager
1.1k salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Senior Officer
478 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Quality Inspector
469 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Quality Engineer
415 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Explore more salaries
Compare Ashok Leyland with

Tata Motors

4.2
Compare

Mahindra & Mahindra

4.1
Compare

Bharat Forge

3.9
Compare

Eicher Motors

4.2
Compare
Did you find this page helpful?
Yes No
write
Share an Interview