Asb International CNC Engineer Interview Questions and Answers

Q1. Which type of bearing used to axial load?
Ans. 
Thrust bearings are used to axial load in mechanical applications.
• Thrust bearings are designed to handle axial loads

• They are commonly used in applications where the load is primarily in the axial direction

• Examples include ball thrust bearings and roller thrust bearings
Answered by AI
View 1 more answer
Q2. Why is used to gear box?
Ans. 
Gear boxes are used to control the speed and torque of a mechanical system by changing the gear ratio.
• Gear boxes allow for the transmission of power from one component to another at different speeds and torques.

• They are used to increase or decrease the speed of rotation depending on the application requirements.

• Gear boxes also provide mechanical advantage by increasing the torque output while reducing the speed of rota...read more
Answered by AI
View 1 more answer
Q3. Which types of pump used by slurry disposal ?
Ans. 
Centrifugal pumps and positive displacement pumps are commonly used for slurry disposal.
• Centrifugal pumps are often used for transporting large volumes of slurry with low viscosity.

• Positive displacement pumps are suitable for handling high viscosity slurry or slurry with solid particles.

• Examples of pumps used for slurry disposal include centrifugal slurry pumps and progressive cavity pumps.
Answered by AI
Add your answer
Q4. Types of alignments?
Ans. 
Types of alignments include shaft alignment, coupling alignment, and belt alignment.
• Shaft alignment ensures that the shafts of rotating equipment are properly aligned to prevent vibration and wear.

• Coupling alignment involves aligning the coupling components to ensure smooth power transmission.

• Belt alignment ensures that belts are properly aligned on pulleys to prevent slippage and wear.

• Other types of alignments may inc...read more
Answered by AI
Add your answer
Q5. Difference between conving pressure and instrument pressure.
Ans. 
Converting pressure is the process of converting pressure units, while instrument pressure is the pressure measured by an instrument.
• Converting pressure involves changing the units of pressure, such as from psi to bar or Pa to atm.

• Instrument pressure is the actual pressure measured by a pressure gauge or sensor.

• Converting pressure is a mathematical calculation, while instrument pressure is a physical measurement.

• For ex...read more
Answered by AI
Add your answer

Basic math,G.I,English

Q1. Basic safety questions
Add your answer

Q1. Interview based on previous experience,C.V.
Add your answer

Q1. Why we hire you
Add your answer
Q2. Do u work in shift
Add your answer

Q1. What is maintenance
Ans. 
Maintenance is the process of ensuring that equipment, machinery, or systems are kept in good working condition to prevent breakdowns and prolong their lifespan.
• Regular inspections and repairs are conducted to identify and address any issues before they escalate.

• Preventive maintenance schedules are created to proactively maintain equipment and prevent unexpected failures.

• Corrective maintenance is performed to fix issue...read more
Answered by AI
Add your answer
Q2. Injection moulding
Add your answer

Q1. How many Engineering Documents will be process if you handle EPC project?
Ans. 
The number of Engineering Documents processed in an EPC project varies depending on the size and complexity of the project.
• The number of Engineering Documents processed in an EPC project can range from hundreds to thousands.

• These documents include drawings, specifications, calculations, reports, and other technical documents.

• The exact number of documents will depend on the scope of the project, the number of discipline...read more
Answered by AI
Add your answer

Easy to solve, Basic practice in need.

Q1. 1. Pumps and its working 2. Boilers 3. Heat Exchangers
Add your answer

Q1. 1. What do you know about the company?
Add your answer
Q2. 2. What are the roles offered by forbes marshall..?
Add your answer

Q1. About job related
Add your answer

Q1. Tell me something about work.
Add your answer

Q1. 7 types of qc tools
Ans. 
7 QC tools are used for quality control in manufacturing. They are simple and effective tools to identify and solve problems.
• Check sheets - used to collect data and analyze it

• Pareto charts - used to identify the most frequent problems

• Histograms - used to show the distribution of data

• Cause-and-effect diagrams - used to identify the root cause of a problem

• Flowcharts - used to show the steps in a process

• Control charts - u...read more
Answered by AI
Add your answer
Q2. What is FMEA,what are the 5s,cp vs cps different
Ans. 
FMEA is a risk assessment tool used to identify and mitigate potential failures. 5S is a workplace organization method. CP and CPS are statistical process control measures.
• FMEA stands for Failure Mode and Effects Analysis. It is a systematic approach to identifying and mitigating potential failures in a process or product.

• 5S is a workplace organization method that involves sorting, simplifying, sweeping, standardizing,...read more
Answered by AI
Add your answer
Q3. What is the ctq and ctc
Ans. 
CTQ stands for Critical to Quality and CTC stands for Critical to Customer.
• CTQ is a measurable characteristic of a product or process that is important to the customer.

• CTC is a measurable characteristic of a product or process that directly impacts customer satisfaction.

• Identifying CTQs and CTCs helps in improving the quality of the product or process.

• Examples of CTQs and CTCs include product reliability, on-time deliv...read more
Answered by AI
Add your answer
Q4. What are the different gauges
Ans. 
Gauges are instruments used to measure various physical quantities. There are different types of gauges for different purposes.
• Pressure gauges measure pressure of fluids or gases

• Temperature gauges measure temperature of substances

• Thickness gauges measure thickness of materials

• Wire gauges measure diameter of wires

• Bore gauges measure diameter of holes

• Thread gauges measure pitch and diameter of screws

• Fuel gauges measure f
Answered by AI
Add your answer
Q5. What are the instrument handling
Ans. 
Instrument handling refers to the proper use, care, and maintenance of tools and equipment used in a particular field.
• Properly clean and sterilize instruments before and after use

• Handle instruments with care to prevent damage or contamination

• Store instruments in a safe and organized manner

• Regularly inspect instruments for wear and tear

• Follow manufacturer's instructions for use and maintenance

• Examples: surgical instrume
Answered by AI
Add your answer
Q6. Do you know the GD&T symbols
Ans. 
Yes, I am familiar with GD&T symbols.
• GD&T stands for Geometric Dimensioning and Tolerancing

• It is a system of symbols used to specify the dimensions and tolerances of a part

• Examples of symbols include concentricity, perpendicularity, and flatness
Answered by AI
Add your answer