Add office photos
Filter interviews by
Aryan Ispat & Power Interview Questions, Process, and Tips
Top Aryan Ispat & Power Interview Questions and Answers
- Q1. Why use conveyor line gear box ? What type belt is used for conveyor line ? What is the gear box? 1 inches eual to _mm ? How Calcutta the nut bolt size on spanner ? Many ...read moreasked in Mechanical Maintenance Technician interview
- Q2. 1 inches eual to _ mm? Why use gear box on conveyor line ?asked in Mechanical Maintenance Technician interview
- Q3. What is the Least count of vernier caliper ?asked in Mechanical Maintenance Technician interview
Aryan Ispat & Power Interview Experiences
3 interviews found
I applied via Referral and was interviewed before Nov 2021. There were 2 interview rounds.
(4 Questions)
- Q1. Why use conveyor line gear box ? What type belt is used for conveyor line ? What is the gear box? 1 inches eual to _mm ? How Calcutta the nut bolt size on spanner ? Many more
- Ans.
Conveyor line gear box is used to control the speed and direction of the conveyor belt. Different types of belts are used depending on the application.
Conveyor line gear box helps in controlling the speed and direction of the belt
Belts used for conveyor line include PVC, rubber, and mesh belts
Gear box is a mechanical device that transmits power and torque from one shaft to another
1 inch is equal to 25.4 mm
Nut bolt size...
- Q2. 1 inches eual to _ mm? Why use gear box on conveyor line ?
- Ans.
1 inch is equal to 25.4 mm.
1 inch is a unit of length commonly used in the imperial system.
The metric equivalent of 1 inch is 25.4 millimeters.
The conversion factor between inches and millimeters is 25.4.
To convert inches to millimeters, multiply the length in inches by 25.4.
For example, 2 inches is equal to 50.8 millimeters.
- Q3. What is the Least count of vernier caliper ?
- Ans.
The least count of a vernier caliper is the smallest measurement that can be accurately read on the scale.
The least count is determined by the number of divisions on the main scale and the vernier scale.
It is calculated by dividing the smallest division on the main scale by the number of divisions on the vernier scale.
For example, if the smallest division on the main scale is 0.1 mm and the vernier scale has 10 divisio...
- Q4. What is nearing & it's principle !
- Ans.
Nearing is a process of reducing the gap between two mating surfaces to improve their fit and performance.
Nearing involves removing a small amount of material from one or both mating surfaces.
It is done to improve the fit and performance of the parts, reduce wear and tear, and prevent leaks.
Examples of nearing include lapping of valves, honing of cylinders, and grinding of gears.
The principle behind nearing is to creat...
Interview Preparation Tips
- Conveyors
- Measuring tap
- Bolt
- Gear Box
So i have best offer for new job.
But I wanted to foreign job
Mechanical Maintenance Technician Interview Questions asked at other Companies
I applied via Referral and was interviewed in May 2020. There were 5 interview rounds.
Interview Questionnaire
10 Questions
- Q1. What is factory
- Ans.
A factory is a building or group of buildings where goods are manufactured or assembled by machines or workers.
Factories are used to mass-produce goods.
They can be found in various industries such as automotive, electronics, and textiles.
Factories can be highly automated or rely on manual labor.
They often have assembly lines where products are put together in stages.
Factories can be dangerous places to work due to heav...
- Q2. Factory act and labor laws
- Q3. About gratuity act
- Q4. Domestic inquiry
- Q5. Grievances handling
- Q6. Welfare activities
- Q7. Csr experience
- Ans.
I have extensive CSR experience in managing customer inquiries and complaints.
Managed a team of CSR representatives and ensured customer satisfaction
Implemented new strategies to improve customer experience
Resolved complex customer issues and provided timely solutions
Maintained accurate records of customer interactions and feedback
Trained new CSR representatives on company policies and procedures
- Q8. Contract labor handling
- Q9. On and off side emergency plans
- Q10. About standing order
Interview Preparation Tips
Skills evaluated in this interview
Manager Interview Questions asked at other Companies
I applied via Campus Placement
Interview Questionnaire
1 Question
- Q1. Basic electrical
Interview Preparation Tips
Senior Engineer Interview Questions asked at other Companies
Top trending discussions
Interview questions from similar companies
I applied via Approached by Company and was interviewed in Sep 2024. There were 5 interview rounds.
(2 Questions)
- Q1. Projects contribution
- Q2. Career transition from development(firmware to software), security(Product to system) etc.,
Print 10 to 1 without using any loops in C
print the number by toggling a bit of a given position
virtual functions -> what would be the output of the code and vtable concept explain in detail
information security standards, protocols, regulations
(3 Questions)
- Q1. All scenario based questions such as you have to hire a candidate but the budget is restricted. You have identified the ideal candidate. how would you handle it.
- Q2. Conflict management
- Q3. Product security questions
(4 Questions)
- Q1. How to add security to a product which is nearing dev completion
- Ans.
Implement security measures such as code reviews, penetration testing, and security training for developers.
Conduct thorough code reviews to identify and fix any security vulnerabilities
Perform penetration testing to simulate real-world attacks and identify weaknesses
Provide security training for developers to educate them on best practices and common security threats
- Q2. What is the right approach to bake in security
- Ans.
The right approach to bake in security involves integrating security measures throughout the software development lifecycle.
Implementing security best practices from the beginning of the development process
Conducting regular security assessments and audits
Training developers on secure coding practices
Utilizing automated security testing tools
Implementing secure coding guidelines and standards
Incorporating security revi
- Q3. How do you address knowledge deficit in team on security areas to develop a product with optimal security
- Ans.
Address knowledge deficit by providing training, resources, and mentorship to team members.
Conduct regular training sessions on security best practices and updates
Provide access to resources such as online courses, articles, and workshops
Assign mentors within the team to guide and support members in security areas
Encourage team members to ask questions and seek clarification on security topics
Implement peer review proc
- Q4. How do you identify the reasonable security for a product? Say for example, the products of enphase used by businesses or by end customers(home owners).
- Ans.
Identifying reasonable security for products involves assessing potential risks, compliance requirements, industry standards, and customer expectations.
Conduct a thorough risk assessment to identify potential threats and vulnerabilities
Consider compliance requirements such as GDPR, HIPAA, or industry-specific regulations
Adhere to industry standards like ISO 27001 or NIST Cybersecurity Framework
Take into account custome...
(2 Questions)
- Q1. Typical questions on why enphase, why x salary, do you undestand roles and responsibilities
- Q2. Notice period negotiation, what are your career aspirations
Interview Preparation Tips
L2-2 hr by BLR team
L3-30mins by VP
L4-50mins by VP
L5-20mins by HR Manager
Skills evaluated in this interview
Manufacturing Services Manager Interview Questions & Answers
Premier Energies
Anonymous
posted on 7 Dec 2024
Selected
I applied via Naukri.com and was interviewed in Nov 2024. There were 2 interview rounds.
(3 Questions)
- Q1. About Experience
- Q2. JD Description and Capabilities
- Q3. Manufacturing Experience
(4 Questions)
- Q1. Solar Power Quality Question
- Q2. Manufacturing process and fundamentals
- Q3. Service process
- Q4. Complaint handling
Interview Preparation Tips
Mechanical Engineer Interview Questions & Answers
SAEL Industries Limited
IKKA Mishra
posted on 24 Dec 2024
(2 Questions)
- Q1. Tell me about your self
- Ans.
I am a dedicated Mechanical Engineer with a strong background in designing and implementing mechanical systems.
Graduated with a degree in Mechanical Engineering from XYZ University
Experienced in CAD software such as AutoCAD and SolidWorks
Worked on projects involving HVAC systems and industrial machinery
Skilled in analyzing and solving complex engineering problems
Strong communication and teamwork skills
- Q2. How many experience you have in Boiler Turbine,ESP,BAG FILTER EPCI
- Ans.
I have 5 years of experience in Boiler Turbine, ESP, and BAG FILTER EPCI projects.
5 years of experience in Boiler Turbine projects
Familiar with ESP (Electrostatic Precipitator) systems
Proficient in BAG FILTER EPCI (Engineering, Procurement, Construction, and Installation)
Managed various projects involving Boiler Turbine, ESP, and BAG FILTER systems
Implemented cost-effective solutions for improving efficiency
(3 Questions)
- Q1. ERECTION PROCESS OF BOILER ?
- Ans.
The erection process of a boiler involves assembling and installing all the components to create a functional boiler system.
Prepare the foundation for the boiler
Assemble the boiler components such as tubes, drums, and headers
Install the boiler on the foundation
Connect the necessary piping and valves
Test the boiler for proper functioning
- Q2. Material specification of all boiler pressure part.
- Ans.
Boiler pressure parts are typically made of carbon steel, alloy steel, or stainless steel to withstand high pressure and temperature.
Carbon steel is commonly used for lower pressure boilers
Alloy steel is used for higher pressure boilers
Stainless steel is used for corrosion resistance in boilers
Materials must meet specific standards like ASTM A516 for carbon steel
- Q3. Which welding process used in water wall panel
- Ans.
The welding process used in water wall panels is typically TIG welding.
TIG welding is commonly used for water wall panels due to its precision and clean welds
TIG welding helps prevent contamination in the weld area, which is crucial for water wall panels
Other welding processes like MIG welding or submerged arc welding may also be used depending on the specific requirements
(2 Questions)
- Q1. What are the functions and applications of SCADA systems?
- Ans.
SCADA systems are used for monitoring, controlling, and managing industrial processes through centralized systems.
Monitor and control industrial processes in real-time
Collect and analyze data from sensors and equipment
Provide alarms and notifications for abnormal conditions
Remote access and control of processes
Historical data logging and reporting
Examples: monitoring oil pipelines, controlling power plants, managing wa
- Q2. What is RF network communication?
- Ans.
RF network communication is a wireless communication technology that uses radio frequency signals to transmit data between devices.
RF network communication allows devices to communicate wirelessly over long distances.
It is commonly used in applications such as remote monitoring, control systems, and IoT devices.
RF signals can be affected by interference, obstacles, and distance, so proper planning and design are import...
(2 Questions)
- Q1. What amount of money is required?
- Q2. What is the location required for the position?
General Manager - Quality Management Interview Questions & Answers
Doosan Power Systems
Karunanithy Posanguraja
posted on 20 Nov 2024
Relevant area synapses of preparation through PPT
(2 Questions)
- Q1. Relevant field with the technical
- Q2. Experience in relevant previously work areaS
(2 Questions)
- Q1. Salary Part with negotiation
- Q2. Medical check up
Interview Preparation Tips
Senior Network Engineer Interview Questions & Answers
Sterlite Power
Anonymous
posted on 20 Jul 2024
Selected
I applied via Naukri.com and was interviewed in Jul 2024. There was 1 interview round.
(5 Questions)
- Q1. What is the process of configuring a new Juniper switch?
- Q2. What are the series of Juniper device?
- Q3. What is IP address and mac address, what are the difference between them?
- Q4. What is lan and vlan?
- Q5. How we check the status Juniper switch port?
Interview Preparation Tips
Production Engineer Interview Questions & Answers
Emmvee Photovoltaic Power
Anonymous
posted on 20 Jan 2025
I applied via AmbitionBox
(3 Questions)
- Q1. Production related question ask
- Q2. Equipment maintenance related question ask
- Q3. Handle manpower
(2 Questions)
- Q1. Production related question ask
- Q2. Equipment maintenance related question ask
Interview Preparation Tips
Aryan Ispat & Power Interview FAQs
Tell us how to improve this page.
Interview Questions for Popular Designations
Aryan Ispat & Power Interview Process
based on 5 interviews
Interview experience
Interview Questions from Similar Companies
Aryan Ispat & Power Reviews and Ratings
based on 37 reviews
Rating in categories
|
Shift Incharge
6
salaries
|  ₹4.1 L/yr - ₹5.1 L/yr |
|
Engineer
6
salaries
| ₹4.1 L/yr - ₹6 L/yr |
|
Senior Engineer
6
salaries
| ₹3.5 L/yr - ₹5 L/yr |
|
Electrical Engineer
4
salaries
| ₹2.7 L/yr - ₹4 L/yr |
|
Mechanical Engineer
4
salaries
| ₹2.9 L/yr - ₹10.8 L/yr |
Tata Steel
JSW Steel
Steel Authority Of India
ArcelorMittal Nippon Steel
- Home >
- Interviews >
- Aryan Ispat & Power Interview Questions
