Add office photos
Filter interviews by
Aryan Ispat & Power Mechanical Maintenance Technician Interview Questions, Process, and Tips
Aryan Ispat & Power Mechanical Maintenance Technician Interview Experiences
1 interview found
I applied via Referral and was interviewed before Nov 2021. There were 2 interview rounds.
(4 Questions)
- Q1. Why use conveyor line gear box ? What type belt is used for conveyor line ? What is the gear box? 1 inches eual to _mm ? How Calcutta the nut bolt size on spanner ? Many more
- Ans.
Conveyor line gear box is used to control the speed and direction of the conveyor belt. Different types of belts are used depending on the application.
Conveyor line gear box helps in controlling the speed and direction of the belt
Belts used for conveyor line include PVC, rubber, and mesh belts
Gear box is a mechanical device that transmits power and torque from one shaft to another
1 inch is equal to 25.4 mm
Nut bolt size...
- Q2. 1 inches eual to _ mm? Why use gear box on conveyor line ?
- Ans.
1 inch is equal to 25.4 mm.
1 inch is a unit of length commonly used in the imperial system.
The metric equivalent of 1 inch is 25.4 millimeters.
The conversion factor between inches and millimeters is 25.4.
To convert inches to millimeters, multiply the length in inches by 25.4.
For example, 2 inches is equal to 50.8 millimeters.
- Q3. What is the Least count of vernier caliper ?
- Ans.
The least count of a vernier caliper is the smallest measurement that can be accurately read on the scale.
The least count is determined by the number of divisions on the main scale and the vernier scale.
It is calculated by dividing the smallest division on the main scale by the number of divisions on the vernier scale.
For example, if the smallest division on the main scale is 0.1 mm and the vernier scale has 10 divisio...
- Q4. What is nearing & it's principle !
- Ans.
Nearing is a process of reducing the gap between two mating surfaces to improve their fit and performance.
Nearing involves removing a small amount of material from one or both mating surfaces.
It is done to improve the fit and performance of the parts, reduce wear and tear, and prevent leaks.
Examples of nearing include lapping of valves, honing of cylinders, and grinding of gears.
The principle behind nearing is to creat...
Interview Preparation Tips
- Conveyors
- Measuring tap
- Bolt
- Gear Box
So i have best offer for new job.
But I wanted to foreign job
Top trending discussions
Interview questions from similar companies
Mechanical Engineer Interview Questions & Answers
SAEL Industries Limited
IKKA Mishra
posted on 24 Dec 2024
(2 Questions)
- Q1. Tell me about your self
- Ans.
I am a dedicated Mechanical Engineer with a strong background in designing and implementing mechanical systems.
Graduated with a degree in Mechanical Engineering from XYZ University
Experienced in CAD software such as AutoCAD and SolidWorks
Worked on projects involving HVAC systems and industrial machinery
Skilled in analyzing and solving complex engineering problems
Strong communication and teamwork skills
- Q2. How many experience you have in Boiler Turbine,ESP,BAG FILTER EPCI
- Ans.
I have 5 years of experience in Boiler Turbine, ESP, and BAG FILTER EPCI projects.
5 years of experience in Boiler Turbine projects
Familiar with ESP (Electrostatic Precipitator) systems
Proficient in BAG FILTER EPCI (Engineering, Procurement, Construction, and Installation)
Managed various projects involving Boiler Turbine, ESP, and BAG FILTER systems
Implemented cost-effective solutions for improving efficiency
(3 Questions)
- Q1. ERECTION PROCESS OF BOILER ?
- Ans.
The erection process of a boiler involves assembling and installing all the components to create a functional boiler system.
Prepare the foundation for the boiler
Assemble the boiler components such as tubes, drums, and headers
Install the boiler on the foundation
Connect the necessary piping and valves
Test the boiler for proper functioning
- Q2. Material specification of all boiler pressure part.
- Ans.
Boiler pressure parts are typically made of carbon steel, alloy steel, or stainless steel to withstand high pressure and temperature.
Carbon steel is commonly used for lower pressure boilers
Alloy steel is used for higher pressure boilers
Stainless steel is used for corrosion resistance in boilers
Materials must meet specific standards like ASTM A516 for carbon steel
- Q3. Which welding process used in water wall panel
- Ans.
The welding process used in water wall panels is typically TIG welding.
TIG welding is commonly used for water wall panels due to its precision and clean welds
TIG welding helps prevent contamination in the weld area, which is crucial for water wall panels
Other welding processes like MIG welding or submerged arc welding may also be used depending on the specific requirements
Assistant Engineer Mechanical Interview Questions & Answers
Real Ispat & Power
Anonymous
posted on 28 Sep 2023
Selected
I applied via Approached by Company and was interviewed in Aug 2023. There were 2 interview rounds.
(3 Questions)
- Q1. Which oil use in gear box ?
- Ans.
The type of oil used in a gear box depends on the specific requirements of the gearbox and manufacturer recommendations.
The type of oil used in a gear box should meet the manufacturer's specifications.
Common types of oils used in gear boxes include mineral oil, synthetic oil, and semi-synthetic oil.
The viscosity of the oil is also an important factor to consider when choosing the right oil for a gear box.
Regular mainte...
- Q2. How many types of bearing use in Rolling Mill ?
- Ans.
There are several types of bearings used in rolling mills, including roller bearings, ball bearings, and tapered roller bearings.
Roller bearings are commonly used in rolling mills due to their ability to support heavy radial loads.
Ball bearings are used for lighter loads and high-speed applications.
Tapered roller bearings are used to support both radial and axial loads.
Other types of bearings that may be used include c...
- Q3. Explain maintenance process of furnace.
- Ans.
Maintenance process of furnace involves regular inspection, cleaning, and repair to ensure optimal performance and safety.
Regularly inspecting the furnace for any signs of wear and tear
Cleaning the furnace components such as burners, filters, and ducts to remove debris and improve efficiency
Replacing any faulty or worn-out parts to prevent breakdowns and ensure safety
Checking and adjusting the fuel and air mixture for ...
Mechanical Supervisor Interview Questions & Answers
Doosan Power Systems
Anonymous
posted on 29 Nov 2022
I applied via Walk-in and was interviewed in Oct 2022. There were 2 interview rounds.
(2 Questions)
- Q1. Esp system all activity, Maintanance activities
- Q2. Thermal powerplant Eraction Boiler maintanance
Interview Preparation Tips
Mechanical Engineer Interview Questions & Answers
SAEL Industries Limited
Anonymous
posted on 2 Feb 2021
I applied via Referral and was interviewed in Jan 2021. There were 3 interview rounds.
Interview Questionnaire
2 Questions
- Q1. Types of Bearing & Coupling.
- Ans.
Bearings and couplings are essential components in mechanical systems.
Types of bearings: ball bearings, roller bearings, plain bearings, magnetic bearings, fluid bearings
Types of couplings: rigid couplings, flexible couplings, fluid couplings, magnetic couplings
Bearings support rotating shafts and reduce friction, while couplings connect two shafts together
Examples of bearings and couplings used in mechanical systems: ...
- Q2. Difference Between Chain Conveyor and Belt Conveyor.
- Ans.
Chain conveyors use chains to move products, while belt conveyors use belts.
Chain conveyors are more durable and can handle heavier loads than belt conveyors.
Belt conveyors are better suited for transporting smaller items and have a smoother operation.
Chain conveyors are commonly used in industries such as automotive and steel, while belt conveyors are used in industries such as food processing and packaging.
Chain conv...
Interview Preparation Tips
I applied via Referral and was interviewed in May 2020. There was 1 interview round.
Interview Questionnaire
2 Questions
- Q1. Explain all activities at site with following safety ruls
- Ans.
Activities at site with safety rules
Conducting regular safety inspections
Providing personal protective equipment (PPE) to workers
Ensuring proper training of workers on safety procedures
Maintaining proper signage and warnings
Implementing emergency response plans
Enforcing strict adherence to safety rules and regulations
Regularly reviewing and updating safety policies and procedures
- Q2. Handling off crains at site explain it
- Ans.
Handling off cranes at site involves proper planning, coordination and safety measures.
Ensure proper communication between crane operator and ground personnel
Inspect crane and rigging equipment before use
Ensure proper weight distribution and load capacity
Use proper hand signals and follow safety protocols
Train personnel on proper crane operation and safety measures
Examples: lifting heavy equipment, materials, or struct
Interview Preparation Tips
Because every work is possible
Aryan Ispat & Power Interview FAQs
Some of the top questions asked at the Aryan Ispat & Power Mechanical Maintenance Technician interview -
Tell us how to improve this page.
Interview Questions for Popular Designations
- Mechanical Engineer Interview Questions
- Mechanical Maintenance Engineer Interview Questions
- Diploma Mechanical Engineer Interview Questions
- Mechanical Technician Interview Questions
- Senior Engineer Mechanical Interview Questions
- Mechanical Supervisor Interview Questions
- Junior Mechanical Engineer Interview Questions
- Mechanical Fitter Interview Questions
- Show more
Interview Questions from Similar Companies
|
Shift Incharge
6
salaries
|  ₹4.1 L/yr - ₹5.1 L/yr |
|
Engineer
6
salaries
| ₹4.1 L/yr - ₹6 L/yr |
|
Senior Engineer
6
salaries
| ₹3.5 L/yr - ₹5 L/yr |
|
Electrical Engineer
4
salaries
| ₹2.7 L/yr - ₹4 L/yr |
|
Mechanical Engineer
4
salaries
| ₹2.9 L/yr - ₹10.8 L/yr |
Tata Steel
JSW Steel
Steel Authority Of India
ArcelorMittal Nippon Steel
- Home >
- Interviews >
- Aryan Ispat & Power Interview Questions >
- Aryan Ispat & Power Mechanical Maintenance Technician Interview Questions
