Upload Button Icon Add office photos
Engaged Employer

i

This company page is being actively managed by ArcelorMittal Nippon Steel Team. If you also belong to the team, you can get access from here

ArcelorMittal Nippon Steel Verified Tick

Compare button icon Compare button icon Compare

Filter interviews by

ArcelorMittal Nippon Steel Interview Questions, Process, and Tips

Updated 6 Mar 2025

Top ArcelorMittal Nippon Steel Interview Questions and Answers

View all 148 questions

ArcelorMittal Nippon Steel Interview Experiences

Popular Designations

221 interviews found

Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(1 Question)

  • Q1. MECHANICAL maintenance and planning

Mechanical Engineer Interview Questions & Answers

user image SATYABRATA BEHERA

posted on 21 Feb 2024

Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(2 Questions)

  • Q1. Various types of breakdown.
  • Ans. 

    Various types of breakdown include mechanical, electrical, software, and structural.

    • Mechanical breakdowns involve issues with moving parts or components, such as a broken gear or worn-out bearings.

    • Electrical breakdowns occur when there is a failure in the electrical system, like a short circuit or blown fuse.

    • Software breakdowns refer to malfunctions in computer programs or systems, leading to errors or crashes.

    • Structur...

  • Answered by AI
  • Q2. Preventive maintenance

Interview Preparation Tips

Interview preparation tips for other job seekers - Interviewer was good as well as asked relevant questions towards EAF and FES in SMS.also gave some extra knowledge in between interview.

Mechanical Engineer Interview Questions asked at other Companies

Q1. What we need to do if pressure valve fail in boiler
View answer (8)

DET Interview Questions & Answers

user image Anonymous

posted on 17 Jan 2024

Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Campus Placement and was interviewed in Dec 2023. There were 2 interview rounds.

Round 1 - Technical 

(1 Question)

  • Q1. Favorite subject related questions
Round 2 - HR 

(1 Question)

  • Q1. Personal information

DET Interview Questions asked at other Companies

Q1. 1.Difference bw petrol and diesel engine. 2.Law of thermodynamics 3.Types of fluid 4.About my hobbies 5.Dc motor working .
View answer (1)

Interview Questions & Answers

user image Anonymous

posted on 8 May 2023

Interview experience
4
Good
Difficulty level
Hard
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Walk-in and was interviewed in Apr 2023. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(9 Questions)

  • Q1. Turbine operation
  • Q2. Project erction Commissing and operation
  • Ans. 

    Candensar to turbine hight 6metar and boiler dram hight c leval in top side

  • Answered Anonymously
  • Q3. Commissioning and operation
  • Ans. 

    Boiler side tube hydraulic test , feed pump Mt trial, load trial , IDFan, FD fan trail , turbine side steam blowing, oil flashing, vaccum chack

  • Answered Anonymously
  • Q4. Turbine DCS opression
  • Ans. 

    Cooling water pump start , steam line charge, main steam valae bypass start165kg /cm2 pressure, steam temperature 525 0c steam floow 320 tans

  • Answered Anonymously
  • Q5. Water system, axzllary pump
  • Q6. Boiler Afbc, cfbc boiler
  • Q7. Gas turbine operation
  • Q8. Steel plant DCS monitoring
  • Q9. Cooling water system

Interview Preparation Tips

Interview preparation tips for other job seekers - I am interested in your company

ArcelorMittal Nippon Steel interview questions for popular designations

 Deputy Manager

 (15)

 Assistant Manager

 (10)

 Graduate Engineer Trainee (Get)

 (7)

 Electrical Engineer

 (6)

 Diploma Trainee Engineer

 (5)

 Shift Engineer

 (4)

 Engineer Trainee

 (4)

 Graduate Trainee

 (3)

Interview Questions & Answers

user image Anonymous

posted on 19 Feb 2024

Interview experience
3
Average
Difficulty level
Moderate
Process Duration
4-6 weeks
Result
Selected Selected

I applied via Recruitment Consulltant and was interviewed in Aug 2023. There were 3 interview rounds.

Round 1 - Technical 

(1 Question)

  • Q1. Your previous company profile,and what's role in your department,and any major activities have you done
Round 2 - HR 

(1 Question)

  • Q1. What's salary expectation,why I hierd you and what to do in up coming 5 years for company,
Round 3 - Case Study 

Development and modification of equipment

Interview Preparation Tips

Interview preparation tips for other job seekers - This is good growthing company

Get interview-ready with Top ArcelorMittal Nippon Steel Interview Questions

Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
More than 8 weeks
Result
Selected Selected

I applied via Recruitment Consulltant and was interviewed before Jun 2023. There were 2 interview rounds.

Round 1 - Technical 

(2 Questions)

  • Q1. Process regarding statutory clearances ?
  • Ans. 

    Statutory clearances involve obtaining legal approvals for various corporate activities.

    • Identify the specific statutory clearances required for each corporate activity

    • Understand the process and timeline for obtaining each clearance

    • Ensure compliance with all legal requirements and regulations

    • Maintain proper documentation of all clearances obtained

    • Regularly review and update the status of pending clearances

  • Answered by AI
  • Q2. Learning experience regarding land acquisition?
  • Ans. 

    Successfully managed land acquisition process for new corporate office, learning importance of thorough research and negotiation skills.

    • Conducting thorough research on local laws and regulations regarding land acquisition

    • Building relationships with landowners and stakeholders to negotiate fair deals

    • Ensuring all necessary permits and approvals are obtained before finalizing the acquisition

    • Learning to anticipate and addr...

  • Answered by AI
Round 2 - HR 

(2 Questions)

  • Q1. General discussion?
  • Q2. Conflict Management?

Interview Preparation Tips

Interview preparation tips for other job seekers - Nice interview concluded with senior person of ArcelorMittal Nippon Steel India.

Be fair and clear thought during interviews... real time example need to include withtbe connect officials.

Deputy General Manager Corporate Affairs Interview Questions asked at other Companies

Q1. Learning experience regarding land acquisition?
View answer (1)

Jobs at ArcelorMittal Nippon Steel

View all

Senior Manager Interview Questions & Answers

user image Pranshu Rana

posted on 26 Mar 2024

Interview experience
5
Excellent
Difficulty level
Hard
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Approached by Company and was interviewed before Mar 2023. There were 3 interview rounds.

Round 1 - Technical 

(3 Questions)

  • Q1. Tell us which type of transformer is better and test runs to be conducted before installing new transformer.
  • Ans. 

    Oil-filled transformers are better due to higher efficiency and lower maintenance requirements. Test runs should include insulation resistance, turns ratio, and load testing.

    • Oil-filled transformers are better than dry-type transformers due to higher efficiency and lower maintenance requirements.

    • Test runs should include insulation resistance testing to check for any insulation breakdown.

    • Turns ratio testing should be con...

  • Answered by AI
  • Q2. How many RIO panels and number of DI/DO and AI/AO channels provided in Blast Furnace. During commissioning of blast furnace what were the major problems you faced?
  • Ans. 

    The Blast Furnace is equipped with multiple RIO panels and a variety of DI/DO and AI/AO channels.

    • The Blast Furnace typically has several RIO panels installed for monitoring and control purposes.

    • The number of DI/DO channels provided in a Blast Furnace can vary depending on the specific setup and requirements.

    • During commissioning, major problems may include issues with sensor calibration, communication errors, or softwar...

  • Answered by AI
  • Q3. Which all types of drives you have worked on? During ID run of motor with drive which parameters are measured and which parameters numbers in drive.
Round 2 - HR 

(2 Questions)

  • Q1. How many projects you have completed.
  • Q2. How many years of maintenance experience. Are you willing to transfer. Are you willing to take task in new department. Expected CTC
Round 3 - One-on-one 

(1 Question)

  • Q1. This one is regarding the expectations and what they can provide.

Senior Manager Interview Questions asked at other Companies

Q1. 1. What you understand the requirement of shuttering material at project site?
View answer (19)

DPT.Manager Interview Questions & Answers

user image Banoj Khuntia

posted on 7 Dec 2023

Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-

I applied via Recruitment Consulltant

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Group Discussion 

Stores Operations process and Scarp disposal

Round 3 - Technical 

(1 Question)

  • Q1. Stores Operations process

DPT.Manager Interview Questions asked at other Companies

Q1. Which SS material you have used in piping construction
View answer (1)

on job Training Interview Questions & Answers

user image Vibhash chandra sahu

posted on 27 Feb 2024

Interview experience
4
Good
Difficulty level
Hard
Process Duration
2-4 weeks
Result
Selected Selected

I applied via Campus Placement and was interviewed in Jan 2024. There was 1 interview round.

Round 1 - HR 

(2 Questions)

  • Q1. Tell me about yourself
  • Q2. You know about AM/NS . What is the product of AM/NS
  • Ans. 

    AM/NS is a joint venture between ArcelorMittal and Nippon Steel Corporation, producing a wide range of steel products.

    • AM/NS produces various steel products such as hot-rolled, cold-rolled, and coated steel sheets.

    • They also manufacture steel plates, pipes, and tubes for various industries.

    • AM/NS offers specialized products like electrical steel for transformers and automotive steel for car manufacturers.

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Branch related questions

on job Training Interview Questions asked at other Companies

Q1. You know about AM/NS . What is the product of AM/NS
View answer (1)

Interview Questions & Answers

user image Anonymous

posted on 18 Nov 2023

Interview experience
5
Excellent
Difficulty level
Hard
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Approached by Company and was interviewed in Jun 2023. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - One-on-one 

(2 Questions)

  • Q1. Explain the audit system approch to the PDCA
  • Q2. Geographical visit the working site, understand the process of working and operation and identified the gaps and recommend the scope of improvement as per Plan - Do- Check - Act

Interview Preparation Tips

Topics to prepare for ArcelorMittal Nippon Steel interview:
  • HIRA
  • Internal Audit
  • Factory rules
Interview preparation tips for other job seekers - Be confident and listen carefully the interviewer

ArcelorMittal Nippon Steel Interview FAQs

How many rounds are there in ArcelorMittal Nippon Steel interview?
ArcelorMittal Nippon Steel interview process usually has 2-3 rounds. The most common rounds in the ArcelorMittal Nippon Steel interview process are Technical, Resume Shortlist and HR.
How to prepare for ArcelorMittal Nippon Steel interview?
Go through your CV in detail and study all the technologies mentioned in your CV. Prepare at least two technologies or languages in depth if you are appearing for a technical interview at ArcelorMittal Nippon Steel. The most common topics and skills that interviewers at ArcelorMittal Nippon Steel expect are Teaching, Direct Tax, Income Tax, SAP and Education.
What are the top questions asked in ArcelorMittal Nippon Steel interview?

Some of the top questions asked at the ArcelorMittal Nippon Steel interview -

  1. Production, Maintenance, Quality and Safety. Out of four, tell me the most impo...read more
  2. What is the difference between thermal power plant and hydro power pl...read more
  3. What are the major problems in any production plant? and how can you handle tha...read more
How long is the ArcelorMittal Nippon Steel interview process?

The duration of ArcelorMittal Nippon Steel interview process can vary, but typically it takes about less than 2 weeks to complete.

Tell us how to improve this page.

ArcelorMittal Nippon Steel Interview Process

based on 255 interviews

Interview experience

4.3
  
Good
View more

Interview Questions from Similar Companies

Tata Steel Interview Questions
4.1
 • 855 Interviews
JSW Steel Interview Questions
3.9
 • 591 Interviews
Jindal Stainless Interview Questions
4.2
 • 205 Interviews
JSW Group Interview Questions
3.9
 • 109 Interviews
Vedanta Limited Interview Questions
3.8
 • 46 Interviews
ESL Steel Interview Questions
4.0
 • 31 Interviews
Vizag Steel Interview Questions
4.1
 • 28 Interviews
Monnet Group Interview Questions
4.2
 • 10 Interviews
View all

ArcelorMittal Nippon Steel Reviews and Ratings

based on 2.6k reviews

4.1/5

Rating in categories

3.9

Skill development

3.9

Work-life balance

3.7

Salary

4.0

Job security

3.8

Company culture

3.5

Promotions

3.8

Work satisfaction

Explore 2.6k Reviews and Ratings
Business Development/ Merger & Acquisition

Mumbai

8-13 Yrs

₹ 20-30 LPA

TGT English Teacher

Surat

3-5 Yrs

Not Disclosed

Talent Acquisition Lead

Mumbai

4-9 Yrs

₹ 1-4.5 LPA

Explore more jobs
Deputy Manager
719 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Assistant Manager
576 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Manager
515 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Assistant Field Engineer
373 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Engineer
345 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Explore more salaries
Compare ArcelorMittal Nippon Steel with

Tata Steel

4.1
Compare

JSW Steel

3.9
Compare

Steel Authority Of India

4.1
Compare

Vedanta Limited

3.8
Compare
Did you find this page helpful?
Yes No
write
Share an Interview