Upload Button Icon Add office photos

Filter interviews by

Amps Electrical Facility Services Interview Questions, Process, and Tips

Updated 10 Mar 2023

Top Amps Electrical Facility Services Interview Questions and Answers

View all 6 questions

Amps Electrical Facility Services Interview Experiences

Popular Designations

3 interviews found

Interview experience
4
Good
Difficulty level
-
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Walk-in and was interviewed before Mar 2022. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all Resume tips
Round 2 - Technical 

(2 Questions)

  • Q1. What is HVAC parameters ?
  • Ans. 

    HVAC parameters refer to the various factors that affect the performance and efficiency of heating, ventilation, and air conditioning systems.

    • HVAC parameters include temperature, humidity, air flow rate, pressure, and energy consumption

    • These parameters can be measured and controlled using sensors, thermostats, and other devices

    • Optimizing HVAC parameters can improve indoor air quality, reduce energy costs, and extend th...

  • Answered by AI
  • Q2. What is Air handling unit?
  • Ans. 

    An air handling unit is a device used to regulate and circulate air as part of a heating, ventilating, and air-conditioning (HVAC) system.

    • AHUs are typically installed in large commercial or industrial buildings.

    • They are responsible for filtering, heating, cooling, and distributing air throughout the building.

    • AHUs can be customized to meet specific building requirements and can be designed to operate with various energy...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Improve your skills and knowledge .
Because it will always help you to get better.

Technician Interview Questions asked at other Companies

Q1. What kinds of pipe used for hot and cold water supply ?
View answer (8)

I applied via Walk-in and was interviewed before Oct 2020. There were 3 interview rounds.

Interview Questionnaire 

4 Questions

  • Q1. Tell me types of chiller and how they working and which cycle?
  • Ans. 

    There are two types of chillers: air-cooled and water-cooled. They work on the vapor compression cycle.

    • Air-cooled chillers use air to cool the refrigerant, while water-cooled chillers use water.

    • Both types of chillers work on the vapor compression cycle, which involves compressing and expanding refrigerant to remove heat from a space.

    • Examples of chillers include centrifugal, screw, and absorption chillers.

    • Centrifugal ch...

  • Answered by AI
  • Q2. Tell me about HT LT and Dg Transformer, how to do load changeover
  • Ans. 

    HT, LT, and DG transformers are used for power distribution. Load changeover is done by switching between transformers.

    • HT transformers are used for high voltage distribution, while LT transformers are used for low voltage distribution.

    • DG transformers are used as backup power sources in case of power outages.

    • Load changeover is done by switching between transformers based on the power demand.

    • Proper safety measures must b...

  • Answered by AI
  • Q3. Tell me what is pac, hvac and ahu full form, their temperature, pressure why use pac in server room
  • Ans. 

    PAC stands for Precision Air Conditioning, HVAC stands for Heating, Ventilation, and Air Conditioning, and AHU stands for Air Handling Unit.

    • PAC is used in server rooms to maintain a constant temperature and humidity level to protect sensitive equipment.

    • HVAC is used to control the temperature, humidity, and air quality in buildings.

    • AHU is a device used to circulate and regulate air as part of a heating, ventilating, and...

  • Answered by AI
  • Q4. Fire fiting equipment, fire pump types use how they work
  • Ans. 

    Fire pumps are used to supply water to fire sprinkler systems and other fire protection equipment.

    • Fire pumps can be electric, diesel, or steam-powered.

    • They work by increasing water pressure and flow rate to the sprinkler system.

    • Fire pumps are typically connected to a water source such as a tank or municipal water supply.

    • Firefighting equipment includes fire extinguishers, hoses, and hydrants.

    • Fire extinguishers are class...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - If ur BE Electrical they asked to Electronics like jfet, mosfet, diodes, symbol terminals, realys, sensor typea

Electrical Supervisor Interview Questions asked at other Companies

Q1. Tell me about HT LT and Dg Transformer, how to do load changeover
View answer (1)

Interview Questions & Answers

user image Anonymous

posted on 31 Dec 2021

I applied via Referral and was interviewed before Dec 2020. There was 1 interview round.

Interview Questionnaire 

5 Questions

  • Q1. Plumbing change and I fire sefty
  • Q2. Pump room. Fire system
  • Q3. Fire Pump Type And plumbing Line Type
  • Q4. Domestic water pump. Flsging line pump
  • Q5. Building Floor Information

Interview Preparation Tips

Interview preparation tips for other job seekers - All pump room pump system and building foolr water line fire and plumbing system

Jobs at Amps Electrical Facility Services

View all

Interview questions from similar companies

I applied via Naukri.com and was interviewed in Nov 2020. There were 3 interview rounds.

Interview Questionnaire 

1 Question

  • Q1. Be clear on salary negotiation

Interview Preparation Tips

Interview preparation tips for other job seekers - Say confidently what ever it is..

I applied via Company Website and was interviewed in Aug 2020. There were 3 interview rounds.

Interview Questionnaire 

2 Questions

  • Q1. Nodejs basics,AWS S3,script file run command,how to catch db timeout
  • Q2. Connect db options,
  • Ans. 

    Connecting to a database has multiple options depending on the type of database and programming language used.

    • For SQL databases, options include using JDBC for Java, ODBC for C++, and ADO.NET for C#.

    • For NoSQL databases, options include using MongoDB's driver for Python or Node.js.

    • ORMs like Hibernate and Entity Framework can also be used to abstract away the database connection details.

    • Connection strings are used to spe...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Db connection attributes need to prepare well

I applied via Naukri.com and was interviewed before Mar 2021. There was 1 interview round.

Round 1 - Technical 

(1 Question)

  • Q1. Based on your previous jobs

Interview Preparation Tips

Interview preparation tips for other job seekers - It's totally your luck in interview

Interview Questionnaire 

1 Question

  • Q1. If your Experience person , mostly they ask your past experience work related question , If Fresher they ask theoretical question

I applied via Approached by Company and was interviewed before May 2021. There were 2 interview rounds.

Round 1 - Technical 

(1 Question)

  • Q1. Piping code and welder qualifications test
  • Ans. 

    Piping code and welder qualifications test

    • Piping code refers to the set of standards and regulations that govern the design, fabrication, and inspection of piping systems.

    • Welder qualifications test is a process of testing and certifying welders to ensure that they have the necessary skills and knowledge to perform welding tasks safely and effectively.

    • Both piping code and welder qualifications test are important in ensu...

  • Answered by AI
Round 2 - HR 

(1 Question)

  • Q1. What is your current ctc

Interview Preparation Tips

Interview preparation tips for other job seekers - Just specific to your answer.
WQT/wps required in detail

I applied via Campus Placement and was interviewed before Feb 2021. There were 2 interview rounds.

Round 1 - Aptitude Test 

Quant, verbal, lrdi

Round 2 - Technical 

(2 Questions)

  • Q1. Machine Design concepts
  • Q2. Thermodynamics and RAC Concepts

Interview Preparation Tips

Interview preparation tips for other job seekers - Crisp and to the point answers

Interview Questionnaire 

5 Questions

  • Q1. Questions about flight mechanics and dynamics and controls
  • Q2. Questions about mechanical engineering
  • Q3. Questions on the thesis one has worked on and various projects and internships
  • Q4. Questions based on practical situations
  • Q5. Questions on basics of material, fundamentals of continuum mechanics, thermal science, parts of engine structure, etc

Interview Preparation Tips

Round: Resume Shortlist
Experience: I was guided by placement office quite appreciably for preparation of resume. First by one to one interaction and second by suggesting to talk to the seniors who are either injob or are hereafter the job. As it is always suggested about resume that, it reflects you in brief, you have to get it as good as you can. I followed the guidelines, made the first draft, got it corrected from some of my friends who are working in industries and got feedbacks from students who have experience from industries.

Round: APTITUDE TEST
Experience: It was intimated as aptitude but it included Verbal, Quants and basics of programmingand data structures & algorithm.

Round: Technical Interview
Experience: I went through two technical rounds and both of these included questions starting from the very basics of materials to the continuum mechanics’ fundamentals and applications. In the first round I was asked about flight mechanics & dynamics and controls’ by giving several conditions of practical importance, some part of engine structures and thermal science, my earlier projects and questions on that, some questions from the internship’s work and M.Tech thesis work. Very fundamental as well as complex questions were asked while explaining about the projects and thesis work. For the second round, I was sent to the panel interviewing for mechanical students and there I was asked questions from various subjects as well as for various conditions given on spot. Including both the technical interviews, I was asked questions from around 9-10 subjects of mechanical engineering. Apart from the questions from the course work, half of the interview was focused on the projects that I did earlier. I was asked to explain about the projects and give good insights of my contributions in that and accordingly I was asked questions from that as well. Later part of the technical round was focused for my thesis work. They started asking about the motivation behind the topic of the thesis and the technical platform set so far for the same. Concluding questions were from the company’s work and how I would be able to relate my expertise and thesis work for their benefit.. In the morning, Honeywell started it’s processing at around 6.30 am and I went for the first technical round at around 7 am. After some basic questions from the resume I was asked about the flight mech & controls. After sometimes the interviewer told me about his background, which was avionics and then he started from that. It must have gone over around 45 minutes. Second round of Honeywell was gruelling and I felt little uncomfortable at some points.

Round: HR Interview
Experience: HR round was more or less usual. Description about me and weaknesses in professional life were asked. The tricky one was one particular question about joining Honeywell and at the end of my answer, I was asked to compare Honeywell and the stalwarts of aerospace industry on my answer’s ground.

General Tips: Since I was looking only for the core aerospace companies, I was not looking very much about the aptitude and GD (specially, GD was not required). I was focusing about the technical side of the preparation, coursework, projects that I have done earlier and thesis work. I used the material provided by SPO for preparing the aptitude test solved some CAT papers and some online resources were useful. Further, I referred some core course works, specifically, thermal, fluid, aerodynamics, propulsion, structures & materials, materials & metallurgy and flight mechanics & dynamics for technical interviews. 



Revise the course works, some part of the projects, be focused for profiles and prepare accordingly. Prior knowledge about companies work and the profile helps a lot. Sound knowledge of thesis work, approach and the applications, motivation behind the topic and the work completed till the placement season starts should clearly be checked. If you are not good at programming and DS & algo then revise the basics of these(helps for aptitude). Be mentally prepared for multiple rounds of technical interviews. Shape yourself according to the profile and surf through the company’s site beforehand. Get some suggestions and feedback from seniors(specifically, M.tech students should talk to seniors, fellow students and labmates who have been in industries) for technical interviews. Focus on your approach towards the problem for the worst case. During technical interview, don’t try to brag about the topic that you are not sure about. They sometimes want to test your approach and attitude for the problem given to you (which will be out of your comfort zone) rather than the accuracy of the answer. Since verbal was also the part of aptitude, don’t forget to look that during your preparation. Final Tips : Don’t lose hope and be focused for the profile that you are interested in and narrow down the companies accordingly. It’s all your attitude, past experience (both academics and professional) and preparation for the placements that will help you to nail it. 1st, 2nd or any other day or any other company (as long asthe profile matches with your interest) don’t matter much. At the end of the day, getting in the core-profile is what matters most (if you are interested incore alone) and if it is your preferred company then it’s a boon. Have faith in yourself and believe in the next option if you don’t get the first one.
College Name: IIT KANPUR
Motivation: Other companies that I was shortlisted for : GE, Rolls-Royce, Airbus. Analysis of available options (based on profile, growth, compensation, BrandName, etc) :As for the first day, GE didn’t seem inclined in taking Aerospace Engineering students and I was not looking for Rolls-Royce very interestingly. I was mainly focusing on Honeywell, Eaton and Airbus and was shortlisted to interview with these three. Because of Honeywell’s versatility and the involvement in R&D(as I got the feedback from people working in there), I was focusing mainly on Honeywell. And it was very much favourable from compensation point of view as well. Finally I was selected in both Honeywell and Eaton, and chose Honeywell.
Contribute & help others!
anonymous
You can choose to be anonymous

Amps Electrical Facility Services Interview FAQs

How many rounds are there in Amps Electrical Facility Services interview?
Amps Electrical Facility Services interview process usually has 2 rounds. The most common rounds in the Amps Electrical Facility Services interview process are Technical and Resume Shortlist.
How to prepare for Amps Electrical Facility Services interview?
Go through your CV in detail and study all the technologies mentioned in your CV. Prepare at least two technologies or languages in depth if you are appearing for a technical interview at Amps Electrical Facility Services. The most common topics and skills that interviewers at Amps Electrical Facility Services expect are SQ, Business Development, Business Intelligence, Excel and MS Access.
What are the top questions asked in Amps Electrical Facility Services interview?

Some of the top questions asked at the Amps Electrical Facility Services interview -

  1. Tell me about HT LT and Dg Transformer, how to do load changeo...read more
  2. Tell me types of chiller and how they working and which cycl...read more
  3. Tell me what is pac, hvac and ahu full form, their temperature, pressure why us...read more

Recently Viewed

SALARIES

Prism Cement - Prism Johnson

SALARIES

Prism Cement - Prism Johnson

INTERVIEWS

JPMorgan Chase & Co.

No Interviews

INTERVIEWS

Carborundum Universal Limited

No Interviews

INTERVIEWS

Acuity Knowledge Partners

No Interviews

INTERVIEWS

Allana Group of Companies

No Interviews

REVIEWS

Larsen & Toubro Limited

No Reviews

SALARIES

Prism Cement - Prism Johnson

INTERVIEWS

ICICI Bank

No Interviews

SALARIES

JPMorgan Chase & Co.

Tell us how to improve this page.

Amps Electrical Facility Services Interview Process

based on 1 interview

Interview experience

4
  
Good
View more

Interview Questions from Similar Companies

Siemens Interview Questions
4.1
 • 417 Interviews
ABB Interview Questions
4.1
 • 233 Interviews
Havells Interview Questions
4.0
 • 209 Interviews
Voltas Interview Questions
4.0
 • 129 Interviews
Bajaj Electricals Interview Questions
4.0
 • 124 Interviews
View all

Amps Electrical Facility Services Reviews and Ratings

based on 129 reviews

3.1/5

Rating in categories

3.1

Skill development

3.2

Work-life balance

3.0

Salary

2.9

Job security

3.2

Company culture

2.8

Promotions

3.1

Work satisfaction

Explore 129 Reviews and Ratings
ELECTRICIAN

Bangalore / Bengaluru

2-7 Yrs

Not Disclosed

ELECTRICAL ENGINEER / FACILITIES ENGINEER

Bangalore / Bengaluru

3-8 Yrs

Not Disclosed

Explore more jobs
Technical Supervisor
26 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Multi Skill Technician
24 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Electrical Technician
22 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Electrical Supervisor
21 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Shift Engineer
21 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Explore more salaries
Compare Amps Electrical Facility Services with

Voltas

4.0
Compare

Siemens

4.1
Compare

Schneider Electric

4.1
Compare

Havells

4.0
Compare
Did you find this page helpful?
Yes No
write
Share an Interview
Rate your experience using AmbitionBox
Terrible
Terrible
Poor
Poor
Average
Average
Good
Good
Excellent
Excellent