i
AkzoNobel
Filter interviews by
Clear (1)
I applied via Naukri.com and was interviewed in Jul 2024. There was 1 interview round.
The amount of space filled by dust varies depending on the quantity and size of particles.
The space filled by dust can range from a small area on a surface to an entire room or building.
Factors such as air circulation, particle size, and accumulation over time can affect the amount of space filled by dust.
For example, a dusty bookshelf may only fill a few square feet of space, while a neglected attic could be completel
Measurement refers to the process of determining the size, length, quantity, or extent of something using standard units.
Measurement involves comparing an unknown quantity to a known standard unit.
Examples of measurements include length (inches, meters), weight (pounds, kilograms), volume (liters, gallons), and time (seconds, minutes).
Accurate measurements are essential in fields such as science, engineering, and const
One liter of cement-based primer typically covers around 8 to 10 square meters of surface area.
One liter of cement-based primer covers approximately 8 to 10 square meters
Coverage may vary depending on the porosity and texture of the surface
It is recommended to refer to the manufacturer's instructions for specific coverage rates
Types of primers include bonding primers, stain-blocking primers, and high-build primers.
Bonding primers help paint adhere to surfaces like metal or plastic
Stain-blocking primers prevent stains from bleeding through paint
High-build primers are thick and fill in imperfections on surfaces
Other types include shellac-based primers, oil-based primers, and water-based primers
Oil paint can take anywhere from a few days to several weeks to fully dry, depending on factors like thickness and environmental conditions.
Oil paint can take anywhere from a few days to several weeks to dry completely.
Factors like the thickness of the paint layer and environmental conditions (humidity, temperature) can affect drying time.
Thicker layers of oil paint will take longer to dry compared to thin layers.
Paint...
Top trending discussions
I was interviewed in Nov 2024.
I applied via Walk-in and was interviewed before Oct 2021. There were 3 interview rounds.
Its all about the overview of marketing
I applied via Referral and was interviewed before Aug 2021. There was 1 interview round.
Paint is a liquid or paste material used to add color and protection to surfaces.
Paint is made up of pigments, binders, solvents, and additives.
Different types of paint include oil-based, water-based, and latex.
Paint can be used for decorative purposes or to protect surfaces from damage.
Paint can be applied using brushes, rollers, or sprayers.
Common paint finishes include matte, satin, and gloss.
1kl is equal to 1000 liters.
1kl = 1000 liters
kl stands for kiloliter
Used to measure volume of liquids
Solvents are liquids used to dissolve or dilute other substances. Paints are made up of pigments, binders, solvents, and additives.
Solvents are used to dissolve or dilute other substances in order to create a solution.
Paints are made up of pigments, binders, solvents, and additives.
Common solvents used in paint making include mineral spirits, turpentine, and acetone.
Solvents are important in paint making because they h...
Excel is a spreadsheet software used for data analysis and management. MSDS stands for Material Safety Data Sheet.
Excel is used for organizing and analyzing data in a tabular format
It allows users to perform calculations, create charts and graphs, and automate tasks
MSDS is a document that provides information about the properties and hazards of a chemical substance
It includes information on handling, storage, and emerg...
A discrepancy report is a document that highlights differences between two sets of data and identifies the reasons for the differences.
A discrepancy report is used to identify and resolve discrepancies between two sets of data.
It is important to include the reasons for the discrepancies in the report.
Examples of discrepancies include differences in inventory counts or financial statements.
The report should be clear and...
Industrial norms include safety standards that must be maintained to ensure workplace safety.
Safety standards are guidelines set by regulatory bodies to ensure safe working conditions.
Precautions include wearing appropriate personal protective equipment, following safety procedures, and reporting any hazards.
Examples of safety standards include OSHA in the US and ISO in Europe.
Safety standards cover areas such as elect...
FMEA can be used to identify and mitigate risks associated with buying land and building.
Identify potential failure modes in the buying and building process
Assess the severity, occurrence, and detectability of each failure mode
Develop and implement controls to mitigate high-risk failure modes
Continuously monitor and update the FMEA as the project progresses
Examples of failure modes could include zoning restrictions, en
SPC stands for Statistical Process Control. It is a method of quality control that uses statistical methods to monitor and control a process.
SPC involves collecting and analyzing data to identify and reduce variation in a process
It helps to ensure that a process is operating within its specified limits and producing consistent results
Examples of SPC tools include control charts, histograms, and Pareto charts
I applied via Referral and was interviewed in Oct 2019. There were 3 interview rounds.
I applied via Job Portal
I applied via Campus Placement and was interviewed in May 2024. There were 2 interview rounds.
Basics aptitude was asked and then a technical round of 30 mins took place.
I applied via Campus Placement and was interviewed before Oct 2023. There were 2 interview rounds.
Technical questions heat transfer and fluid dynamics
During my internship, I gained hands-on experience in various aspects of the industry, developed new skills, and built a strong network of professionals.
Learned how to use industry-specific software and tools
Assisted with research projects and data analysis
Participated in team meetings and presentations
Received feedback and guidance from experienced mentors
I applied via Campus Placement and was interviewed in Apr 2023. There were 2 interview rounds.
NDT department is responsible for non-destructive testing solutions in various industries.
NDT department uses various techniques like ultrasonic testing, radiography, magnetic particle testing, etc.
They ensure the quality and integrity of materials without causing damage.
NDT solutions are crucial in industries like aerospace, automotive, oil & gas, etc.
Data sheet ready to work means all necessary information and details are available for the task at hand.
Ensure all required data is present and accurate
Check for any missing or incomplete information
Verify that the data is up-to-date and relevant
Organize the data in a systematic manner for easy access and reference
based on 1 interview
Interview experience
Senior Sales Officer
204
salaries
| ₹0 L/yr - ₹0 L/yr |
Assistant Manager
113
salaries
| ₹0 L/yr - ₹0 L/yr |
Sales Officer
108
salaries
| ₹0 L/yr - ₹0 L/yr |
Area Sales Manager
84
salaries
| ₹0 L/yr - ₹0 L/yr |
Head Key Accounts
77
salaries
| ₹0 L/yr - ₹0 L/yr |
Asian Paints
Berger Paints
Kansai Nerolac Paints
Pidilite Industries