Upload Button Icon Add office photos

Aisin Automotive Haryana

Compare button icon Compare button icon Compare

Filter interviews by

Aisin Automotive Haryana Diploma Trainee Engineer Interview Questions and Answers

Updated 8 Dec 2022

Aisin Automotive Haryana Diploma Trainee Engineer Interview Experiences

1 interview found

Interview Questionnaire 

2 Questions

  • Q1. Management rules are very good
  • Q2. Injection moulding department too much support teams

Interview Preparation Tips

Interview preparation tips for other job seekers - Thats company was rules and regulations too much good

Interview questions from similar companies

I applied via Naukri.com and was interviewed in Jul 2019. There were 3 interview rounds.

Interview Questionnaire 

5 Questions

  • Q1. What's process engineering works
  • Ans. 

    Process engineering involves designing, optimizing, and managing industrial processes to improve efficiency and productivity.

    • Process engineering focuses on analyzing and improving processes in various industries such as manufacturing, chemical, and pharmaceutical.

    • It involves identifying bottlenecks, reducing waste, and implementing process improvements to enhance productivity.

    • Process engineers use tools like process fl...

  • Answered by AI
  • Q2. What's the difference between cp and pp
  • Ans. 

    cp and pp are both commands in Unix-like operating systems, but they have different functionalities.

    • cp stands for 'copy' and is used to copy files or directories from one location to another.

    • pp stands for 'print and pause' and is used to print files with pagination, pausing after each page.

    • cp can be used to create a duplicate of a file or directory, while pp is used for printing files in a controlled manner.

    • Example: cp...

  • Answered by AI
  • Q3. What's control plan
  • Ans. 

    A control plan is a documented procedure that outlines the steps and measures taken to ensure quality and consistency in a manufacturing process.

    • Control plans are commonly used in industries such as automotive, aerospace, and electronics.

    • They include details on the process steps, key characteristics, measurement methods, and acceptable tolerances.

    • Control plans help identify potential risks, prevent defects, and ensure ...

  • Answered by AI
  • Q4. What's smed
  • Ans. 

    SMED stands for Single Minute Exchange of Die. It is a lean manufacturing technique used to reduce the time it takes to change over a production process.

    • SMED is used to minimize downtime during changeovers

    • It focuses on separating internal and external setup tasks

    • The goal is to convert as many internal setup tasks to external setup tasks

    • By reducing setup time, production flexibility and efficiency are improved

  • Answered by AI
  • Q5. What's capex
  • Ans. 

    Capex stands for capital expenditure, which refers to the funds used by a company to acquire, upgrade, or maintain physical assets.

    • Capex is an investment made by a company to purchase or improve long-term assets such as buildings, equipment, or technology.

    • It is different from operational expenses (opex) which are ongoing costs to run the business.

    • Capex is typically planned and budgeted for in advance.

    • Examples of capex ...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Be prepared as per your resume shared.

Skills evaluated in this interview

I applied via Recruitment Consultant and was interviewed in Feb 2021. There were 3 interview rounds.

Interview Questionnaire 

1 Question

  • Q1. General questions from my experince Background.
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Recruitment Consulltant and was interviewed in Jul 2024. There were 3 interview rounds.

Round 1 - Technical 

(2 Questions)

  • Q1. Quality core tools
  • Q2. Customer interaction
Round 2 - One-on-one 

(2 Questions)

  • Q1. Knowledge about Quality tools
  • Q2. Root cause analysis
Round 3 - HR 

(2 Questions)

  • Q1. Salary discussion
  • Q2. Company policy & benifits
Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Don’t add your photo or details such as gender, age, and address in your resume. These details do not add any value.
View all tips
Round 2 - HR 

(1 Question)

  • Q1. Qualifications and Experience
Round 3 - Technical 

(1 Question)

  • Q1. All about my Working experience

I applied via Recruitment Consultant and was interviewed in Feb 2021. There were 3 interview rounds.

Interview Questionnaire 

2 Questions

  • Q1. How to close customers complaints.
  • Ans. 

    To close customer complaints, actively listen to their concerns, empathize with their frustrations, offer a solution or compensation, and follow up to ensure satisfaction.

    • Listen attentively to the customer's complaint

    • Empathize with their frustrations and acknowledge their feelings

    • Offer a solution or compensation to resolve the issue

    • Follow up with the customer to ensure their satisfaction

  • Answered by AI
  • Q2. How to resolve the issue.
  • Ans. 

    To resolve the issue, identify the root cause, develop a plan, and implement solutions.

    • Identify the root cause of the issue

    • Develop a plan to address the issue

    • Implement solutions based on the plan

    • Monitor and evaluate the effectiveness of the solutions

    • Make necessary adjustments if needed

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Present you self with honesty.
Interview experience
3
Average
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Aptitude Test 

The first was a technical screening, where I was asked to solve coding problems on a shared platform. The questions tested my ability to think on my feet, focusing on optimizing solutions and writing clean, maintainable code.

Round 2 - Coding Test 

This was more interactive, involving a whiteboard session where I had to design a system from scratch. The interviewer challenged my assumptions and pushed me to consider edge cases, scalability, and performance. It was intense, but it made me appreciate the importance of clear, structured thinking.

Round 3 - HR 

(1 Question)

  • Q1. There was a behavioral interview where I was asked about my past experiences, teamwork, and how I handled challenges. This round emphasized the company’s culture and how I might fit into their team.

Interview Questionnaire 

4 Questions

  • Q1. Difference between VA & VE
  • Ans. 

    VA is value analysis, while VE is value engineering. Both are cost-saving techniques used in product development.

    • VA is a systematic review of a product's components and functions to identify areas where cost can be reduced without affecting performance.

    • VE is a more comprehensive approach that involves rethinking the entire product design to achieve cost savings while improving performance.

    • VA is typically used in the ea...

  • Answered by AI
  • Q2. How to calculate cost of the plastic molding components
  • Ans. 

    The cost of plastic molding components can be calculated by considering factors such as material cost, tooling cost, labor cost, and overhead cost.

    • Determine the material cost per unit of the component

    • Calculate the tooling cost, which includes the cost of the mold and any necessary equipment

    • Factor in the labor cost, which includes the cost of operating the molding machine and any necessary labor for finishing and assemb...

  • Answered by AI
  • Q3. Name some polymers
  • Ans. 

    Polymers are large molecules made up of repeating units called monomers. They have a wide range of applications in various fields.

    • Polyethylene

    • Polypropylene

    • Polyvinyl chloride

    • Polystyrene

    • Polyester

    • Polyurethane

    • Nylon

    • Teflon

    • Silicone

    • Rubber

  • Answered by AI
  • Q4. System audits

Interview Preparation Tips

Interview preparation tips for other job seekers - Be calm & perform
Round 1 - Technical 

(1 Question)

  • Q1. 5S , LINE BALACING, KAIZEN ,FMEA

Interview Preparation Tips

Interview preparation tips for other job seekers - ITS GOOD ORGANIZATION , SUPPORTING TEAM , GOOD WORK CULTURE
Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Aptitude Test 

General aptitude test

Round 3 - Technical 

(2 Questions)

  • Q1. By CAD software
  • Q2. Drawing knowledge
Round 4 - HR 

(1 Question)

  • Q1. About your self
Round 5 - Interview with HOD 

(1 Question)

  • Q1. Academic knowledge

Interview Preparation Tips

Interview preparation tips for other job seekers - Be prepared yourself

Aisin Automotive Haryana Interview FAQs

What are the top questions asked in Aisin Automotive Haryana Diploma Trainee Engineer interview?

Some of the top questions asked at the Aisin Automotive Haryana Diploma Trainee Engineer interview -

  1. Injection moulding department too much support te...read more
  2. Management rules are very g...read more

Tell us how to improve this page.

Interview Questions from Similar Companies

Knorr-Bremse Interview Questions
3.9
 • 56 Interviews
Goodyear Interview Questions
3.6
 • 55 Interviews
Sanden Vikas Interview Questions
4.0
 • 45 Interviews
FCC Clutch Interview Questions
4.0
 • 36 Interviews
Shivam Autotech Interview Questions
3.6
 • 30 Interviews
View all
Aisin Automotive Haryana Diploma Trainee Engineer Salary
based on 90 salaries
₹1.5 L/yr - ₹2.5 L/yr
14% less than the average Diploma Trainee Engineer Salary in India
View more details

Aisin Automotive Haryana Diploma Trainee Engineer Reviews and Ratings

based on 42 reviews

4.0/5

Rating in categories

3.9

Skill development

3.8

Work-life balance

4.0

Salary

3.8

Job security

4.4

Company culture

3.7

Promotions

3.8

Work satisfaction

Explore 42 Reviews and Ratings
Oprating Engineer
237 salaries
unlock blur

₹1.3 L/yr - ₹4.1 L/yr

Engineer
99 salaries
unlock blur

₹2.4 L/yr - ₹7 L/yr

Diploma Trainee Engineer
90 salaries
unlock blur

₹1.5 L/yr - ₹2.5 L/yr

Assistant Manager
78 salaries
unlock blur

₹6.8 L/yr - ₹10.3 L/yr

Senior Engineer
76 salaries
unlock blur

₹4 L/yr - ₹8.5 L/yr

Explore more salaries
Compare Aisin Automotive Haryana with

Knorr-Bremse

3.9
Compare

Greaves Cotton

4.1
Compare

Sanden Vikas

4.0
Compare

Victora Auto Private Limited

3.9
Compare
Did you find this page helpful?
Yes No
write
Share an Interview