Filter interviews by
Had coding, normal apti , code snippets
Developed a web-based project management system for a large corporation
Utilized Agile methodology for project development
Integrated with existing CRM system for seamless data flow
Implemented user-friendly interface for easy navigation
I applied via Referral and was interviewed before Apr 2021. There was 1 interview round.
Subnetting is dividing a network into smaller subnetworks. There are two types of routing: static and dynamic. Static routing is manually configured by the network administrator. The subnet mask of /27 is 255.255.255.224. STP is a protocol used to prevent loops in a network. Etherchannel is a technique used to combine multiple physical links into a single logical link. VLAN is a logical grouping of devices in a network...
I appeared for an interview before Dec 2019.
Polycom Group Series is a video conferencing system for businesses and organizations.
Allows for high-quality video and audio conferencing
Supports multiple participants in different locations
Integrates with various collaboration tools
Can be controlled through a remote or mobile app
Crestron's controlling protocols are used for home automation and control systems.
Crestron uses proprietary protocols for communication between devices.
Crestron's main protocol is called Crestron Home OS (CH5).
Other protocols used by Crestron include SIMPL Windows, Crestron Toolbox, and Crestron Studio.
These protocols allow for seamless integration and control of various devices in a home automation system.
Baud rate is the number of signal or symbol changes per second in a communication channel.
Baud rate is measured in bits per second (bps).
It determines the rate at which data is transmitted over a communication channel.
Higher baud rates allow for faster data transfer.
For example, a baud rate of 9600 means 9600 bits of data are transmitted per second.
RS232 protocol is a standard for serial communication. Third-party device control can be achieved using this protocol.
RS232 protocol is a standard for serial communication between devices.
Third-party device control can be achieved by sending commands over RS232.
Commands can be sent using a terminal emulator or programming language.
Examples of devices that can be controlled using RS232 include printers, scanners, and in
RS-485 is a serial communication protocol used for long-distance communication.
It is a half-duplex protocol
It can support up to 32 devices on a single bus
It uses differential signaling to reduce noise and increase range
It has a maximum data rate of 10 Mbps
It is commonly used in industrial automation and control systems
To control Polycom video conferencing via Crestron cp3, use the Polycom RealPresence API and Crestron SIMPL#Pro programming language.
Use the Polycom RealPresence API to send commands to the Polycom system
Create a SIMPL#Pro module to interface with the Crestron cp3
Map the commands from the API to the SIMPL#Pro module
Use the SIMPL#Pro module to send the mapped commands to the Polycom system
The Bss BLU-100 can be controlled over RS232 using a variety of commands.
The BLU-100 uses a proprietary protocol called HiQnet
Commands can be sent using a terminal emulator program
Examples of commands include setting input and output levels, muting channels, and adjusting EQ settings
Crestron application license has free and paid versions with different working details.
Crestron application is a software used for automation and control systems.
The free version has limited features and is meant for personal use.
The paid version has advanced features and is meant for commercial use.
The license is required to activate the software and access all its features.
The working details depend on the specific v
RS232 commands can be sent over IR port using an IR to RS232 converter.
Use an IR to RS232 converter to convert the IR signals to RS232 commands.
Connect the IR to RS232 converter to the device that needs to receive the commands.
Send the RS232 commands through the IR port using the converter.
Ensure that the IR port and the converter are compatible with each other and the device.
Test the connection and commands to ensure
AGC Networks interview questions for popular designations
Top trending discussions
I applied via Naukri.com and was interviewed before Nov 2019. There were 4 interview rounds.
posted on 20 Feb 2021
I applied via Recruitment Consultant and was interviewed before Feb 2020. There were 4 interview rounds.
posted on 14 Jan 2022
I applied via Campus Placement and was interviewed before Jan 2021. There were 4 interview rounds.
Concatenate two linked lists alternatively
Create a new linked list
Traverse both linked lists simultaneously
Alternate between adding nodes from each list to the new list
If one list is longer than the other, add the remaining nodes to the end of the new list
To create a file server, you need to set up a dedicated computer or network-attached storage (NAS) device to store and share files.
Choose a computer or NAS device with enough storage capacity for your needs
Install a file server software such as Windows Server or Linux-based Samba
Configure the software to create shared folders and set access permissions
Connect clients to the file server using network protocols such as S...
I applied via Naukri.com and was interviewed in Jun 2020. There were 3 interview rounds.
A domain is a group of computers, devices, or resources that share a common network identity.
Domains are used in computer networking to organize and manage resources.
A domain can be a local network or a larger network like the internet.
Domains are often used in conjunction with domain name systems (DNS) to assign unique names to resources.
Domains can also be used to manage security and access control for resources.
Exam...
LAN stands for Local Area Network. It is a computer network that connects devices within a limited area such as a home, office, or building.
LAN is a type of network that is used to connect devices within a limited area.
It is commonly used in homes, offices, and buildings.
LAN can be wired or wireless.
It allows devices to share resources such as printers, files, and internet access.
Examples of LAN technologies include Et
DHCP stands for Dynamic Host Configuration Protocol. It is a network protocol that automatically assigns IP addresses to devices.
DHCP is used to simplify network administration by automating the IP address assignment process.
It allows devices to join a network and obtain an IP address without manual configuration.
DHCP servers can also provide additional network configuration information, such as DNS and gateway setting...
I applied via Referral and was interviewed before Jul 2021. There was 1 interview round.
DataWindow is a GUI control in PowerBuilder used to display and manipulate data from a database.
DataWindow can be used to retrieve data from a database, display it in a tabular format, and allow users to edit the data.
It supports various data sources such as SQL, ODBC, and XML.
DataWindow can also be used to create reports and graphs.
It provides various features such as sorting, filtering, grouping, and computed columns...
Some of the top questions asked at the AGC Networks interview -
based on 2 interviews
Interview experience
based on 113 reviews
Rating in categories
Network Engineer
32
salaries
| ₹1.9 L/yr - ₹5 L/yr |
Avaya Support Engineer
24
salaries
| ₹2 L/yr - ₹6 L/yr |
Technical Support Engineer
17
salaries
| ₹1.8 L/yr - ₹6 L/yr |
AV Engineer
15
salaries
| ₹1.5 L/yr - ₹3.8 L/yr |
Service Engineer
13
salaries
| ₹2.1 L/yr - ₹6.2 L/yr |
3i Infotech
Microland
Newgen Software Technologies
NSE.IT