Upload Button Icon Add office photos

ACC

Compare button icon Compare button icon Compare

Filter interviews by

ACC Safety Officer Interview Questions and Answers

Updated 30 Sep 2022

ACC Safety Officer Interview Experiences

2 interviews found

I applied via Company Website and was interviewed in Mar 2022. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Aptitude Test 

Health safety management, office Documentation, store Inspection

Round 3 - One-on-one 

(9 Questions)

  • Q1. Health safety management
  • Q2. HSE Training Accident report
  • Q3. Welfare facilities ,work at height
  • Q4. Material lifting shifting, lifting plan
  • Q5. Hot work , confined space, Training
  • Q6. Scaffolding training, FLRA
  • Q7. HIRA, permit to work
  • Q8. Minutes of meeting of Contractor
  • Q9. Induction training, health checkup

Interview Preparation Tips

Interview preparation tips for other job seekers - Helping and motivate and site special visits, and conduct Meetings

I applied via Recruitment Consultant and was interviewed in Feb 2021. There were 3 interview rounds.

Interview Questionnaire 

1 Question

  • Q1. WAH,Confined Space, Electrical safety,Hot work,PTW,Risk Assessment, HAZID,etc.

Interview Preparation Tips

Interview preparation tips for other job seekers - Just be well prepared for interview with technical questions & activities based upon last company experience.be honest,polite and confident & don't fake your answers.

Safety Officer Interview Questions Asked at Other Companies

Q1. If you don't have any safety equipment and documents how to compl ... read more
Q2. What you check before starting the work at height activity?
Q3. What is safety equipment. Use for site
Q4. How much hazard you identify in confined space like toxic and fla ... read more
asked in Sraco
Q5. IF IN A NON SMOKING ZONE ANY OFFICAL IS SMOKING WHAT PRECAUTIONS ... read more

Interview questions from similar companies

Interview Questionnaire 

2 Questions

  • Q1. What is meaning of centre gravity
  • Ans. 

    The center of gravity is the point where the entire weight of an object can be considered to act.

    • Center of gravity is the average location of the weight distribution of an object.

    • It is the point where the object is perfectly balanced in all directions.

    • The center of gravity affects the stability and balance of an object.

    • For symmetrical objects, the center of gravity is usually at the geometric center.

    • For irregularly sha...

  • Answered by AI
  • Q2. Whey we should follow H&S management system at work place
  • Ans. 

    Following a H&S management system at the workplace is crucial for ensuring the safety and well-being of employees.

    • Compliance with H&S management system reduces the risk of accidents and injuries.

    • It helps in creating a safe work environment and promotes a culture of safety.

    • Following H&S management system improves employee morale and productivity.

    • It ensures legal compliance and avoids penalties or fines.

    • Implementing H&S ...

  • Answered by AI

I applied via Recruitment Consulltant and was interviewed before Oct 2021. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - One-on-one 

(3 Questions)

  • Q1. How can you improve road safety standard
  • Ans. 

    Improving road safety standards can be achieved through a combination of education, enforcement, and engineering measures.

    • Increasing public awareness through campaigns and education programs

    • Strict enforcement of traffic laws and penalties for violators

    • Improving road infrastructure and implementing safety features such as speed bumps, traffic signals, and pedestrian crossings

    • Encouraging the use of safety equipment such ...

  • Answered by AI
  • Q2. What will you like to improve in transportation to teach drivers
  • Ans. 

    I would like to improve driver education on defensive driving techniques and the importance of regular vehicle maintenance.

    • Implement defensive driving techniques in the curriculum

    • Emphasize the importance of regular vehicle maintenance

    • Provide training on handling emergency situations

    • Encourage the use of safety equipment such as seat belts and airbags

    • Promote awareness of the dangers of distracted driving

  • Answered by AI
  • Q3. What is Hazard? Define with examples
  • Ans. 

    A hazard is anything that can cause harm or damage to people, property, or the environment.

    • Hazard can be physical, chemical, biological, or environmental

    • Examples of physical hazards include slips, trips, falls, and machinery accidents

    • Chemical hazards include exposure to toxic substances like asbestos or lead

    • Biological hazards include exposure to infectious diseases or contaminated materials

    • Environmental hazards include

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Always be confident while facing to intervention and keep one on one eye contact while answering may be you are wrong
Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(2 Questions)

  • Q1. What is your role and responsibilities.
  • Q2. What is ERP and it's type.
  • Ans. 

    ERP stands for Emergency Response Plan. It is a plan outlining procedures to follow in case of emergencies.

    • ERP is a detailed plan outlining steps to be taken in case of emergencies such as fires, natural disasters, or accidents.

    • There are different types of ERP depending on the nature of the organization and the potential risks involved.

    • Common types of ERP include fire evacuation plans, medical emergency response plans,...

  • Answered by AI

Skills evaluated in this interview

Interview Questionnaire 

3 Questions

  • Q1. Why Can't Handle Oxygen Cylinder Manually.
  • Ans. 

    Oxygen cylinders cannot be handled manually due to their high pressure and potential for explosion.

    • Oxygen cylinders are pressurized containers that contain a large amount of oxygen gas.

    • The high pressure inside the cylinder makes it difficult to handle and control manually.

    • If mishandled, oxygen cylinders can explode, causing serious injuries or even fatalities.

    • Specialized equipment and training are required to safely ha...

  • Answered by AI
  • Q2. How much gas is found in oxygen cylinder
  • Q3. What should be the minimum and maximum height for working and height
  • Ans. 

    The minimum and maximum height for working and height depend on the specific job and industry.

    • The minimum and maximum height for working should be determined based on the tasks involved and the potential risks.

    • For example, in construction, the minimum height for working on scaffolding may be set at 6 feet, while the maximum height for working on a ladder may be set at 20 feet.

    • Regulations and guidelines from relevant au...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - I am interested for faculty

I applied via Recruitment Consulltant and was interviewed in Apr 2022. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - HR 

(1 Question)

  • Q1. Tell them About your self ,education, experience, salary, family, Accommodation,
Round 3 - Technical 

(3 Questions)

  • Q1. Hazards indentification and risk assessment format about each activity.
  • Q2. What is behaviour based safety ??
  • Ans. 

    Behaviour based safety is a proactive approach to safety that focuses on identifying and eliminating unsafe behaviours in the workplace.

    • It involves observing and analyzing employee behaviour to identify potential safety hazards

    • It aims to change unsafe behaviours through positive reinforcement and training

    • It requires active participation and commitment from both management and employees

    • Examples include implementing a sa...

  • Answered by AI
  • Q3. What is factories act..??
  • Ans. 

    Factories Act is a legislation that governs the health, safety, and welfare of workers in factories.

    • The act applies to all factories where 10 or more workers are employed with power and 20 or more workers without power.

    • It mandates the provision of basic amenities like clean drinking water, adequate ventilation, and lighting.

    • The act also lays down guidelines for the handling of hazardous substances and machinery.

    • It requ...

  • Answered by AI

Interview Preparation Tips

Topics to prepare for Birla Corporation Safety Officer interview:
  • HIRA
  • Risk Assessment
  • SOP
  • JSA
  • Lototo
  • Swp
  • Hazards identification
  • Types of Hazards
  • Work at height
  • Confined space
  • Safety standards
Interview preparation tips for other job seekers - Prepare about your cv . Mainly they raise question from your cv.
Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
-
Round 1 - HR 

(2 Questions)

  • Q1. What are your notice period
  • Ans. 

    My notice period is one month.

    • Notice period is one month

    • I am required to give one month's notice before leaving my current position

    • I can start in one month's time

  • Answered by AI
  • Q2. Disscus about your education
  • Ans. 

    I have a Bachelor's degree in Occupational Health and Safety from XYZ University.

    • Bachelor's degree in Occupational Health and Safety

    • Completed courses in workplace safety regulations

    • Hands-on training in emergency response procedures

  • Answered by AI
Round 2 - Technical 

(5 Questions)

  • Q1. About lifting work
  • Q2. Safety documentation
  • Q3. About PSM
  • Q4. About hot work
  • Q5. Your total experience in Safety field what about you fase challenges in construction site
  • Ans. 

    I have 10 years of experience in the Safety field, facing challenges in construction sites.

    • Ensuring compliance with safety regulations and protocols

    • Implementing safety training programs for construction workers

    • Conducting regular safety inspections and audits

    • Addressing hazards such as falls, electrical hazards, and equipment safety

    • Investigating accidents and near misses to prevent future incidents

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Good knowledge with safety documentation and site work

Interview Questionnaire 

5 Questions

  • Q1. Types of scaffolding.
  • Ans. 

    Scaffolding is a temporary structure used in construction to support workers and materials.

    • Supported scaffolding: Consists of one or more platforms supported by rigid load-bearing members, such as poles, legs, frames, or outriggers.

    • Suspended scaffolding: Hangs from overhead supports and is commonly used for tasks like window washing or painting the exterior of a building.

    • Rolling scaffolding: Equipped with wheels or cas...

  • Answered by AI
  • Q2. Details about Hotwork
  • Q3. Details about height work & Electrical safety
  • Q4. All portable hand tools
  • Ans. 

    Portable hand tools are commonly used in workplaces and can pose various safety hazards.

    • All portable hand tools should be inspected regularly for defects or damage.

    • Workers should be trained on how to properly use and handle hand tools.

    • Personal protective equipment, such as gloves and eye protection, should be worn when using hand tools.

    • Hand tools should be stored in a safe and organized manner to prevent accidents.

    • Exam...

  • Answered by AI
  • Q5. Safety net

Safety Officer Interview Questions & Answers

JK Cement user image Quimuddeen Ansari

posted on 8 Sep 2024

Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - HR 

(2 Questions)

  • Q1. What is scaffolding??
  • Ans. 

    Scaffolding is a temporary structure used to support workers and materials during construction, maintenance, or repair of buildings.

    • Scaffolding provides a safe working platform for workers at heights.

    • It is typically made of metal or wood and can be assembled and disassembled easily.

    • Scaffolding must be inspected regularly to ensure it is safe to use.

    • Examples of scaffolding types include tube and coupler, frame, and syst

  • Answered by AI
  • Q2. What is confined space.?
  • Ans. 

    Confined space is an area that is not designed for continuous occupancy, has limited entry and exit points, and may have poor ventilation.

    • Confined spaces are typically small and enclosed, making it difficult to enter and exit.

    • These spaces may have limited oxygen supply, toxic gases, or other hazards present.

    • Examples of confined spaces include storage tanks, silos, tunnels, and sewers.

  • Answered by AI
Round 2 - One-on-one 

(3 Questions)

  • Q1. What is responsibility of safety Officer
  • Ans. 

    Safety Officer is responsible for ensuring the safety of employees, implementing safety protocols, conducting safety inspections, and providing safety training.

    • Implementing safety protocols to prevent accidents and injuries

    • Conducting safety inspections to identify hazards and risks

    • Providing safety training to employees on proper safety procedures

    • Investigating accidents and incidents to determine root causes and prevent

  • Answered by AI
  • Q2. What is Near Miss
  • Ans. 

    A near miss is an unplanned event that did not result in injury, illness, or damage, but had the potential to do so.

    • Near misses are important to report and investigate to prevent future accidents.

    • They can provide valuable information on potential hazards in the workplace.

    • Examples of near misses include a tool falling from a height but narrowly missing a worker, or a vehicle almost colliding with another but stopping ju

  • Answered by AI
  • Q3. What is permit to work??
  • Ans. 

    A permit to work is a formal written system used to control certain types of work that are identified as potentially hazardous.

    • A permit to work ensures that all necessary precautions are taken before work begins

    • It specifies the work to be done, the hazards involved, and the necessary precautions to be taken

    • Examples include hot work permits for welding, confined space entry permits, and electrical work permits

  • Answered by AI

ACC Interview FAQs

How many rounds are there in ACC Safety Officer interview?
ACC interview process usually has 3 rounds. The most common rounds in the ACC interview process are Resume Shortlist, Aptitude Test and One-on-one Round.
How to prepare for ACC Safety Officer interview?
Go through your CV in detail and study all the technologies mentioned in your CV. Prepare at least two technologies or languages in depth if you are appearing for a technical interview at ACC. The most common topics and skills that interviewers at ACC expect are Construction, Consultancy, HSE, ITES and Investigation.
What are the top questions asked in ACC Safety Officer interview?

Some of the top questions asked at the ACC Safety Officer interview -

  1. WAH,Confined Space, Electrical safety,Hot work,PTW,Risk Assessment, HAZID,e...read more
  2. Hot work , confined space, Train...read more
  3. Material lifting shifting, lifting p...read more

Tell us how to improve this page.

ACC Safety Officer Salary
based on 101 salaries
₹2.1 L/yr - ₹7.2 L/yr
7% less than the average Safety Officer Salary in India
View more details

ACC Safety Officer Reviews and Ratings

based on 22 reviews

4.2/5

Rating in categories

3.5

Skill development

3.5

Work-life balance

3.4

Salary

3.5

Job security

3.6

Company culture

3.4

Promotions

3.6

Work satisfaction

Explore 22 Reviews and Ratings
Assistant Manager
375 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Deputy Manager
231 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Manager
197 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Senior Executive
159 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Sales Executive
128 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Explore more salaries
Compare ACC with

Ambuja Cements

3.9
Compare

UltraTech Cement

4.2
Compare

Shree Cement

3.8
Compare

The Ramco Cements

4.2
Compare
Did you find this page helpful?
Yes No
write
Share an Interview