Upload Button Icon Add office photos

Worley

Compare button icon Compare button icon Compare

Filter interviews by

Worley Senior Engineer Mechanical Interview Questions and Answers

Updated 7 Jun 2024

Worley Senior Engineer Mechanical Interview Experiences

2 interviews found

Interview experience
5
Excellent
Difficulty level
Easy
Process Duration
2-4 weeks
Result
Selected Selected

I applied via Approached by Company and was interviewed before Jun 2023. There was 1 interview round.

Round 1 - Technical 

(2 Questions)

  • Q1. Introduction, experience and brief explanation about the role in previous company/project
  • Q2. Technical.knowledge and experience about some specific equipments to be handled within upcoming project, technical concern, lesson learn, etc.
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Naukri.com and was interviewed before Jul 2022. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(2 Questions)

  • Q1. What is PMS, Define one class for LPG system piping
  • Ans. 

    PMS stands for Piping Material Specification. One class for LPG system piping is Class 150.

    • PMS is a document that specifies the materials, standards, and requirements for piping systems.

    • Class 150 is a common class for LPG system piping, indicating the pressure rating of the piping components.

    • PMS helps ensure that the piping system is designed and constructed according to industry standards and safety regulations.

  • Answered by AI
  • Q2. What is the procedure for hydrotest
  • Ans. 

    Hydrotest procedure involves filling the equipment with water and pressurizing it to check for leaks or structural integrity.

    • Prepare the equipment by ensuring it is clean and free of debris

    • Fill the equipment with water and remove air pockets

    • Gradually increase the pressure to the specified level

    • Hold the pressure for a specified duration to check for leaks

    • Monitor for any leaks or structural failures

    • Release the pressure a

  • Answered by AI
Round 3 - HR 

(1 Question)

  • Q1. What is your CTC and expected ctc
  • Ans. 

    Current CTC is $90,000 and expected CTC is $110,000

    • Current CTC: $90,000

    • Expected CTC: $110,000

    • Open to negotiation based on benefits and growth opportunities

  • Answered by AI

Senior Engineer Mechanical Interview Questions Asked at Other Companies

Q1. Few manufacturing process for sheet metal operations and when to ... read more
Q2. 1) DESCRIBE ABOUT THE WORKING OF TRANSMISSION OF WHEEL LOADER. 2) ... read more
Q3. What is our products and how many country we have plants do you k ... read more
Q4. How can you handle the worsted condition during the job in manufa ... read more
asked in GAIL
Q5. what is pearlite and how does its form? is it ductile? if yes why ... read more

Senior Engineer Mechanical Jobs at Worley

View all

Interview questions from similar companies

I applied via Company Website and was interviewed before Aug 2021. There was 1 interview round.

Round 1 - Technical 

(2 Questions)

  • Q1. Hydraulic symbols and drawings
  • Q2. Hydraulic circuit of any equipment
  • Ans. 

    Hydraulic circuit is a system of interconnected pipes, valves, and actuators that transmit power using pressurized fluid.

    • Hydraulic circuits are commonly used in heavy machinery, such as excavators and cranes.

    • The circuit consists of a pump, valves, cylinders, and hoses.

    • The pump pressurizes the fluid, which is then directed to the valves.

    • The valves control the flow of fluid to the cylinders, which then convert the fluid ...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Just stick to basics, they will only ask about basics, In L&T safety plays a important role.

Always mention safety taken while doing any work
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Recruitment Consulltant and was interviewed in Aug 2022. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - One-on-one 

(2 Questions)

  • Q1. What's the alignment methods
  • Ans. 

    Alignment methods are techniques used to ensure proper positioning and orientation of mechanical components.

    • Common alignment methods include laser alignment, dial indicator alignment, and straight edge alignment.

    • Laser alignment uses a laser beam to measure and adjust the alignment of components.

    • Dial indicator alignment uses a dial gauge to measure the alignment of components.

    • Straight edge alignment involves using a str...

  • Answered by AI
  • Q2. Vibration analysis basics

Interview Preparation Tips

Interview preparation tips for other job seekers - prepare on the resume data klsdfkldklnfgsdklngklavnsklfnvfioj
Interview experience
5
Excellent
Difficulty level
Hard
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Company Website and was interviewed in Jul 2022. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - One-on-one 

(3 Questions)

  • Q1. Ask by HR to interviewer of their basic knowledge.
  • Q2. Name, qualifications, where from, last job, last job responsibility etc.
  • Q3. Software skill, SAP, Excel, Word, PPT etc.
Round 3 - Technical 

(2 Questions)

  • Q1. Equipment knowledge, engines knowledge, hydraulic machinery knowledge, hydraulic drawings, electrical drawings, knowledge of documentation work.
  • Q2. They told me to prepare spares list from a breakdown hydra, TSE. Test my knowledge from breakdown equipment repair skills ask Hydraulic circuit they told me to attend breakdown of Hydraulic machines. Live...

Interview Preparation Tips

Topics to prepare for Kalpataru Projects International Senior Engineer Mechanical interview:
  • Company Profiling
  • Job rols
  • Technical Skills
Interview preparation tips for other job seekers - Where to apply and what will your job in that organisation. They ask all questions for there requirements so before attending any interviews please read all technicalities company whichever required.

I applied via Newspaper Ad and was interviewed before Sep 2021. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(2 Questions)

  • Q1. Simple mechanical questions?
  • Q2. Mechanical softwares?

Interview Preparation Tips

Interview preparation tips for other job seekers - Strong technical skills
Mechanical basic questions related to water
Softwares that are used in design
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Naukri.com and was interviewed in Dec 2022. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(1 Question)

  • Q1. How to calculate Gpm for water supply pump?
  • Ans. 

    Gpm for water supply pump can be calculated by dividing the flow rate in gallons by the time in minutes.

    • Calculate the flow rate in gallons per minute (GPM)

    • Determine the time in minutes over which the flow rate is measured

    • Divide the flow rate by the time to get the GPM value

  • Answered by AI
Round 3 - One-on-one 

(1 Question)

  • Q1. What is the actual purpose of heat exchanger
  • Ans. 

    Heat exchangers are devices used to transfer heat between two or more fluids, ensuring efficient heat transfer and temperature control.

    • Transfer heat between fluids

    • Maintain temperature control

    • Increase energy efficiency

    • Commonly used in HVAC systems, refrigeration units, and chemical processing plants

  • Answered by AI
Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(1 Question)

  • Q1. Be prepared on you core competency
Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - One-on-one 

(8 Questions)

  • Q1. Called for HR and technical assesment in office
  • Q2. P22 procedure and PWHT tolerance etc
  • Q3. Site execution and Quality management process etc
  • Q4. Coordination with client and EPC at works front
  • Q5. Welding WPS procedure
  • Ans. 

    Welding WPS procedure involves creating a detailed document outlining the welding process to ensure quality and consistency.

    • WPS stands for Welding Procedure Specification

    • It includes details such as welding parameters, materials, preheat requirements, etc.

    • WPS is essential for ensuring weld quality and meeting code requirements

    • Examples of WPS documents include AWS D1.1 for structural steel welding

  • Answered by AI
  • Q6. Alignment of rotating and static equipment
  • Ans. 

    Alignment of rotating and static equipment is crucial for smooth operation and efficiency.

    • Proper alignment ensures minimal vibration and wear on components

    • Use precision tools like laser alignment systems for accurate alignment

    • Regularly monitor and adjust alignment to prevent issues

    • Improper alignment can lead to equipment failure and costly repairs

    • Examples: aligning a motor shaft with a pump shaft in a water treatment p...

  • Answered by AI
  • Q7. Chimney flue cane segment erection procedure
  • Ans. 

    Chimney flue cane segment erection procedure involves assembling and installing individual segments of the chimney flue.

    • Prepare the work area by ensuring it is clean and free of debris.

    • Assemble the cane segments according to the manufacturer's instructions.

    • Use appropriate tools and equipment to lift and position the segments into place.

    • Secure the segments together using bolts or other fastening methods.

    • Inspect the comp...

  • Answered by AI
  • Q8. Quality and HSE

Interview Preparation Tips

Interview preparation tips for other job seekers - Nothing

I applied via Naukri.com and was interviewed in Aug 2021. There were 3 interview rounds.

Interview Questionnaire 

3 Questions

  • Q1. About the maintenance of crane an generator
  • Q2. Technical information about Mobile crane and gantry cranes
  • Q3. Technical information about diesel engine

Interview Preparation Tips

Interview preparation tips for other job seekers - You should have key knowledge of maintenance of construction equipments

Worley Interview FAQs

How many rounds are there in Worley Senior Engineer Mechanical interview?
Worley interview process usually has 2 rounds. The most common rounds in the Worley interview process are Technical, HR and Resume Shortlist.
How to prepare for Worley Senior Engineer Mechanical interview?
Go through your CV in detail and study all the technologies mentioned in your CV. Prepare at least two technologies or languages in depth if you are appearing for a technical interview at Worley. The most common topics and skills that interviewers at Worley expect are Mechanical Engineering, Consulting, HP Data Protector, Recruitment and Remediation.
What are the top questions asked in Worley Senior Engineer Mechanical interview?

Some of the top questions asked at the Worley Senior Engineer Mechanical interview -

  1. What is PMS, Define one class for LPG system pip...read more
  2. What is the procedure for hydrot...read more
  3. What is your CTC and expected ...read more

Tell us how to improve this page.

Worley Senior Engineer Mechanical Interview Process

based on 2 interviews

Interview experience

5
  
Excellent
View more
Worley Senior Engineer Mechanical Salary
based on 27 salaries
₹9.8 L/yr - ₹30 L/yr
143% more than the average Senior Engineer Mechanical Salary in India
View more details

Worley Senior Engineer Mechanical Reviews and Ratings

based on 3 reviews

4.8/5

Rating in categories

3.3

Skill development

4.9

Work-life balance

3.2

Salary

4.9

Job security

4.8

Company culture

3.0

Promotions

4.0

Work satisfaction

Explore 3 Reviews and Ratings
Senior Mechanical Engineer

Kolkata

10-15 Yrs

Not Disclosed

Senior Mechanical Engineer

Kolkata

10-15 Yrs

Not Disclosed

Explore more jobs
Process Engineer
326 salaries
unlock blur

₹4.5 L/yr - ₹16 L/yr

Deputy Manager
207 salaries
unlock blur

₹9.5 L/yr - ₹32.1 L/yr

Piping Designer
165 salaries
unlock blur

₹4.5 L/yr - ₹15.1 L/yr

Piping Design Engineer
156 salaries
unlock blur

₹6.3 L/yr - ₹23.4 L/yr

Piping Engineer
153 salaries
unlock blur

₹4.5 L/yr - ₹18 L/yr

Explore more salaries
Compare Worley with

Larsen & Toubro Limited

4.0
Compare

Tata Projects

4.2
Compare

Shapoorji Pallonji Group

4.1
Compare

Kalpataru Projects International

4.1
Compare
Did you find this page helpful?
Yes No
write
Share an Interview