Filter interviews by
I applied via Naukri.com and was interviewed before Sep 2021. There were 3 interview rounds.
Top trending discussions
posted on 18 May 2024
I applied via Naukri.com and was interviewed in Apr 2024. There was 1 interview round.
Favourable zone in RCC refers to the region of a reinforced concrete member where the concrete is in compression and the steel is in tension.
Favourable zone is the area where the concrete is able to resist compressive forces effectively.
It is typically located at the top of a beam or slab, where the bending moment is highest.
In this zone, the steel reinforcement helps to resist tensile forces, while the concrete resist...
Lap length is the length of overlap between two reinforcing bars in a concrete structure to ensure proper transfer of loads.
Lap length is important for ensuring the continuity of reinforcement in concrete structures.
It is typically specified in building codes and design standards.
The lap length required depends on factors such as the diameter of the bars, concrete strength, and design loads.
For example, in a beam, the ...
Lapping in reinforcement involves overlapping two reinforcement bars to ensure continuity and strength in the structure.
Lapping is commonly used in construction to connect two reinforcement bars together.
The length of the lap varies depending on the design requirements and the type of reinforcement used.
Proper lapping ensures that the load is transferred effectively between the bars.
Examples of lapping include lap spli
Bearings in bridges help distribute loads and allow for movement due to temperature changes and settlement.
Bearings help distribute the loads from the superstructure to the substructure of the bridge.
They allow for movement of the bridge deck due to temperature changes, wind forces, and settlement of the foundation.
Bearings help reduce stress on the bridge components and prevent damage.
Common types of bearings used in ...
Types of expansion joints include slip joints, bellows joints, and modular joints.
Slip joints allow for movement in one direction only
Bellows joints accommodate movement in multiple directions
Modular joints are made up of separate components that can be replaced individually
I applied via Referral and was interviewed in Dec 2023. There was 1 interview round.
Fixed connection does not allow rotation at the base plate, while pinned connection allows rotation.
Fixed connection is rigid and does not allow rotation at the base plate.
Pinned connection allows rotation at the base plate.
Fixed connection provides more stability and resistance to lateral forces.
Pinned connection is more flexible and allows for some movement.
Examples: Fixed connection is commonly used in high-rise bui...
The rise is the vertical distance between two consecutive steps, while the tread is the horizontal distance.
The rise is typically around 7-8 inches, while the tread is usually around 10-11 inches.
The rise and tread dimensions are important for ensuring safe and comfortable stair design.
Building codes often dictate the minimum and maximum rise and tread dimensions for safety reasons.
Pitch distance in bolt refers to the distance between the centers of adjacent bolts in a bolted connection.
Pitch distance is typically measured from the center of one bolt to the center of the next bolt in a row.
It is important to maintain consistent pitch distances to ensure proper load distribution and structural integrity.
For example, in a bolted connection with a pitch distance of 2 inches, the centers of adjacent
To create a pipe rack section on both directions.
Identify the location and dimensions for the pipe rack section
Consider the load requirements and support structures
Design the pipe rack section using appropriate materials and connections
Ensure proper spacing and alignment for pipes in both directions
Yes, I have extensive experience with basements and below ground structures.
I have designed and analyzed numerous basements for residential and commercial buildings.
I am familiar with waterproofing techniques and soil mechanics related to below ground structures.
I have experience with retaining walls, foundations, and underground parking structures.
I have worked on projects involving deep excavations and shoring system...
I was interviewed before Feb 2024.
I applied via campus placement at National Institute of Technology (NIT), Warangal and was interviewed before May 2023. There were 3 interview rounds.
Aptitude+ Technical MCQ test
BMD and SFD diagrams show internal forces in a structure, like bending moment and shear force.
BMD diagram displays variation of bending moment along the length of a beam or frame.
SFD diagram shows variation of shear force along the length of a beam or frame.
In continuous beams, BMD and SFD diagrams help in analyzing internal forces at different supports and sections.
Portal frames have different loading conditions which...
Plastic method of design is a structural engineering approach that considers the redistribution of internal forces to achieve a more efficient design.
Plastic method allows for redistribution of internal forces beyond the elastic limit of the material.
It is based on the concept of plastic hinges forming in the structure to dissipate energy.
Design is based on achieving a collapse mechanism that is ductile and predictable...
I applied via Referral
I applied via Recruitment Consultant and was interviewed before Dec 2020. There were 3 interview rounds.
posted on 7 Dec 2023
I applied via Referral and was interviewed in Nov 2023. There were 3 interview rounds.
Toe and heel are parts of a retaining wall. Toe refers to the non-earth portion while heel refers to the earth portion.
Toe and heel are terms used in the context of retaining walls.
Toe refers to the non-earth portion of the wall.
Heel refers to the earth portion of the wall.
Toe provides stability and prevents sliding of the wall.
Heel provides support and resists the pressure exerted by the earth.
Toe and heel are importa...
There are various types of concrete used in construction, each with different strength and durability characteristics.
Concrete is classified based on its compressive strength, measured in megapascals (MPa).
Common types of concrete include M5, M7.5, M10, M15, M20, M25, M30, M35, M40, M45, and M50.
The number after 'M' represents the compressive strength of the concrete in MPa.
For example, M20 concrete has a compressive s...
A Kuplak pipe can withstand a load of 4 tons.
The load-bearing capacity of a Kuplak pipe is 4 tons.
This information is specific to Kuplak pipes and may vary for other types of pipes.
It is important to consider the weight distribution and other factors when determining the load capacity of a pipe.
Example: A Kuplak pipe can support the weight of a small car or heavy machinery.
Accountant
220
salaries
| ₹5 L/yr - ₹9 L/yr |
Process Engineer
107
salaries
| ₹4.8 L/yr - ₹11.2 L/yr |
Billing Accountant
96
salaries
| ₹5.5 L/yr - ₹9.4 L/yr |
Accounts Payable Accountant
67
salaries
| ₹5 L/yr - ₹8.1 L/yr |
Payroll Administrator
64
salaries
| ₹5.3 L/yr - ₹13 L/yr |
Baker Hughes
Schlumberger
Halliburton
TechnipFMC