Upload Button Icon Add office photos

Filter interviews by

Clear (1)

Wipro PARI Senior Design Engineer Interview Questions, Process, and Tips

Updated 27 Mar 2024

Wipro PARI Senior Design Engineer Interview Experiences

1 interview found

Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Not Selected

I applied via Company Website and was interviewed before Mar 2023. There were 2 interview rounds.

Round 1 - Aptitude Test 

General questions regarding current events mathematical logical questions etc

Round 2 - Technical 

(5 Questions)

  • Q1. What is tolerance stack up & what is IT grades?
  • Ans. 

    Tolerance stack up is the accumulation of variations in dimensions and tolerances in a product design. IT grades are international standards for tolerances.

    • Tolerance stack up occurs when the cumulative effect of individual part tolerances results in a deviation from the intended design.

    • IT grades, such as IT01, IT0, IT1, etc., are used to specify the level of tolerance allowed for a particular dimension or feature.

    • Under...

  • Answered by AI
  • Q2. Calculations based on pneumatics and hydraulic selection etc.
  • Q3. What is anti friction bearings explain.
  • Ans. 

    Anti-friction bearings are designed to reduce friction between moving parts, allowing for smooth and efficient operation.

    • Anti-friction bearings use rolling elements (such as balls or rollers) to reduce friction between two surfaces in contact.

    • They are commonly used in machinery and equipment to support rotating or linear motion.

    • Examples include ball bearings, roller bearings, and needle bearings.

    • These bearings are desi...

  • Answered by AI
  • Q4. What is type of splines?
  • Ans. 

    Splines are mechanical components used to transfer torque between two rotating objects while allowing for slight misalignment or movement.

    • Splines are used in mechanical engineering to transfer torque between shafts or other rotating components.

    • There are different types of splines including involute, straight-sided, and serrated splines.

    • Splines allow for slight misalignment or movement between the connected components w

  • Answered by AI
  • Q5. What is PU and PTFE explain
  • Ans. 

    PU stands for polyurethane, a versatile polymer used in various applications. PTFE stands for polytetrafluoroethylene, a synthetic fluoropolymer known for its non-stick properties.

    • PU is a type of polymer that can be rigid or flexible, commonly used in foam insulation, coatings, adhesives, and sealants.

    • PTFE is a synthetic fluoropolymer with high heat resistance and low friction, often used in non-stick cookware, gaskets

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Prepare all necessary calculations and selection criteria..

Skills evaluated in this interview

Interview questions from similar companies

Interview experience
4
Good
Difficulty level
Easy
Process Duration
-
Result
Selected Selected
Round 1 - Technical 

(1 Question)

  • Q1. Description about engineering drawing
  • Ans. 

    Engineering drawing is a visual representation of an object or system, typically created using specialized software or by hand.

    • Engineering drawings communicate design intent and specifications to manufacturers and other stakeholders.

    • They include details such as dimensions, materials, tolerances, and assembly instructions.

    • Common types of engineering drawings include orthographic projections, isometric views, and explode...

  • Answered by AI
Round 1 - Technical 

(1 Question)

  • Q1. They will ask about Btech and Mtech projects and electrical engineering questions
  • Ans. Mtech project based on your thesis and work done whereas Btech project basics as well questions related to power systems, machine.
  • Answered Anonymously

Interview Preparation Tips

Interview preparation tips for other job seekers - Just brush up the basics and have clear concepts about your project.
Round 1 - Technical 

(1 Question)

  • Q1. What is difference between == and ===?
  • Ans. 

    The difference between == and === is that == compares the values of two variables, while === compares both the values and the data types.

    • The == operator performs type coercion, meaning it converts the operands to a common type before comparison.

    • The === operator does not perform type coercion and requires both the values and the data types to be the same for a true comparison.

    • For example, 1 == '1' returns true because t...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Study Verilog well from nptel course and and Sequential Circuits too using MUX

Skills evaluated in this interview

Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(2 Questions)

  • Q1. What is difference between MCB &MCCB?
  • Ans. 

    MCB is a miniature circuit breaker used for low currents, while MCCB is a molded case circuit breaker used for higher currents.

    • MCB is designed for low currents, typically up to 100A, while MCCB is designed for higher currents, typically up to 2500A.

    • MCB is a compact device with fixed trip settings, while MCCB is larger and has adjustable trip settings.

    • MCB is commonly used in residential and commercial applications, whil...

  • Answered by AI
  • Q2. What is mean by relay and how it operates?
  • Ans. 

    A relay is an electrically operated switch that uses an electromagnet to mechanically operate the switch contacts.

    • Relays are used to control high power circuits with a low power signal.

    • When the coil of the relay is energized, it creates a magnetic field that causes the switch contacts to close or open.

    • Relays are commonly used in automotive applications, industrial controls, and home appliances.

    • There are different types...

  • Answered by AI
Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all Resume tips
Round 2 - Aptitude Test 

General aptitude

Interview Preparation Tips

Interview preparation tips for other job seekers - Be calm while answering questions all are basic. In nature not to brainstorm too much
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
2-4 weeks
Result
Not Selected

I applied via Naukri.com and was interviewed in Aug 2024. There were 4 interview rounds.

Round 1 - Aptitude Test 

Kindly arrange the aptitude test is Online mode

Round 2 - Technical 

(3 Questions)

  • Q1. Current work load
  • Ans. 

    Currently managing multiple projects with varying deadlines and priorities.

    • Balancing workload by prioritizing tasks based on deadlines and importance

    • Utilizing project management tools to track progress and allocate resources efficiently

    • Communicating with team members and stakeholders to ensure alignment on project goals and timelines

  • Answered by AI
  • Q2. About the company related work
  • Q3. About working experience and current working details
Round 3 - HR 

(2 Questions)

  • Q1. Family background & privious company background
  • Q2. Salary & company policy
Round 4 - Group Discussion 

Metting with top management

I applied via Recruitment Consulltant

Round 1 - Assignment 

Check the interview called is genuine

Round 2 - One-on-one 

(1 Question)

  • Q1. What is your expectations
  • Ans. 

    My expectations for the Design Engineer role include opportunities for growth, a collaborative work environment, and challenging projects.

    • Opportunities for professional growth and development

    • A collaborative and supportive work environment

    • Challenging and interesting projects to work on

    • Access to the latest design tools and technologies

    • Clear communication and feedback from the team

    • Opportunities for creativity and innovati...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Opportunity is purely based on relations with those working in that company
Interview experience
4
Good
Difficulty level
Easy
Process Duration
2-4 weeks
Result
Selected Selected

I applied via Referral and was interviewed before Mar 2023. There was 1 interview round.

Round 1 - One-on-one 

(2 Questions)

  • Q1. Name and background
  • Q2. Tool test and technical
Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Properly align and format text in your resume. A recruiter will have to spend more time reading poorly aligned text, leading to high chances of rejection.
View all Resume tips
Round 2 - Technical 

(2 Questions)

  • Q1. Technical questions on control panel
  • Q2. Technical questions for cable harness

Interview Preparation Tips

Interview preparation tips for other job seekers - Prepare well for control panel design and technical questions on harness
Contribute & help others!
anonymous
You can choose to be anonymous

Wipro PARI Interview FAQs

How many rounds are there in Wipro PARI Senior Design Engineer interview?
Wipro PARI interview process usually has 2 rounds. The most common rounds in the Wipro PARI interview process are Aptitude Test and Technical.
What are the top questions asked in Wipro PARI Senior Design Engineer interview?

Some of the top questions asked at the Wipro PARI Senior Design Engineer interview -

  1. What is tolerance stack up & what is IT grad...read more
  2. What is anti friction bearings expla...read more
  3. What is PU and PTFE expl...read more

Recently Viewed

INTERVIEWS

Wipro PARI

No Interviews

INTERVIEWS

Systemantics

No Interviews

DESIGNATION

DESIGNATION

DESIGNATION

INTERVIEWS

Grey Orange

No Interviews

REVIEWS

Incture Technologies

No Reviews

INTERVIEWS

Emami

No Interviews

DESIGNATION

INTERVIEWS

Emami

No Interviews

Tell us how to improve this page.

Wipro PARI Senior Design Engineer Interview Process

based on 1 interview

Interview experience

4
  
Good
View more
Wipro PARI Senior Design Engineer Salary
based on 19 salaries
₹3.5 L/yr - ₹11.5 L/yr
25% less than the average Senior Design Engineer Salary in India
View more details

Wipro PARI Senior Design Engineer Reviews and Ratings

based on 1 review

1.0/5

Rating in categories

3.0

Skill development

1.0

Work-life balance

1.0

Salary

3.0

Job security

1.0

Company culture

1.0

Promotions

2.0

Work satisfaction

Explore 1 Review and Rating
Member
191 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Lead Member
143 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Design Engineer
141 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Mechanical Engg. Design
97 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Control Software Engineer
81 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Explore more salaries
Compare Wipro PARI with

TCS iON

3.9
Compare

Infosys BPM

3.6
Compare

HCLTech

3.5
Compare

Tech Mahindra

3.5
Compare
Did you find this page helpful?
Yes No
write
Share an Interview