Upload Button Icon Add office photos

Filter interviews by

Wind World Junior Engineer - Maintenance Interview Questions and Answers

Updated 14 Feb 2024

Wind World Junior Engineer - Maintenance Interview Experiences

1 interview found

Interview experience
3
Average
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(2 Questions)

  • Q1. About your self and Technical questions
  • Q2. About your self and Technical basic questions

Interview Preparation Tips

Interview preparation tips for other job seekers - Know about your work and Study before going to Interview

Interview questions from similar companies

Interview experience
5
Excellent
Difficulty level
Easy
Process Duration
-
Result
-

I applied via Company Website and was interviewed in Jun 2024. There were 2 interview rounds.

Round 1 - Group Discussion 

Gear box replacement work

Round 2 - HR 

(6 Questions)

  • Q1. Barring checking and replacement work and safety first and paper work and walked away clean and fresh and try out and blumber block top cover open and old barring slue remove and new barring slue replace a...
  • Q2. V-scraper replacement work and safety first and paper work and walked away clean and fresh and try out and bolt nut open and old v-scraper remove and new v-scraper replace and bolt nut tightening sure and ...
  • Q3. Motor replacement work and safety first and paper work and walked away clean and fresh and try out and bolt nut open and old motor remove and new motor replace and bolt nut tightening sure and dayal guage ...
  • Q4. Discharge chute replacement work and safety first and paper work and walked away clean and fresh and try out and bolt nut open and old discharge chute remove and new discharge chute replace and bolt nut ti...
  • Q5. Gear box replacement work and safety first and paper work and walked away clean and fresh and try out and bolt nut open and old gear box remove and new gear box replace and bolt nut tightening sure and day...
  • Q6. Conveyor pully greasing and saving work and safety first and paper work and walked away clean and fresh and grease gunand all pully checking and saving greasing work and paper work cancelled

Interview Preparation Tips

Interview preparation tips for other job seekers - Because of the growth of opportunity and advancement
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Walk-in and was interviewed in Aug 2023. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Aptitude Test 

Question related to electrical and mental ability

Round 3 - Technical 

(5 Questions)

  • Q1. Tell me about your self, what is transformer, Tell me about your BE Project, What is resistance, capacitor, Generator And so on
  • Q2. What is transformer
  • Ans. 

    A transformer is an electrical device that transfers electrical energy between two or more circuits through electromagnetic induction.

    • Transformers are used to increase or decrease voltage levels in electrical circuits.

    • They consist of two coils of wire, known as the primary and secondary coils, wrapped around a core.

    • Step-up transformers increase voltage levels, while step-down transformers decrease voltage levels.

    • Transf...

  • Answered by AI
  • Q3. What is resistance
  • Ans. 

    Resistance is the opposition to the flow of electric current.

    • Resistance is measured in ohms (Ω).

    • It is caused by the collisions of electrons with atoms in a conductor.

    • Higher resistance leads to lower current flow.

    • Resistance can be affected by factors like material, length, and temperature.

    • Examples of high resistance materials include rubber and glass.

    • Examples of low resistance materials include copper and silver.

  • Answered by AI
  • Q4. What is generator
  • Ans. 

    A generator is a device that converts mechanical energy into electrical energy.

    • Generators are commonly used in power plants to generate electricity

    • They can also be used as backup power sources in case of power outages

    • Generators can be powered by various sources such as gasoline, diesel, natural gas, or renewable energy sources like wind or solar

    • They work on the principle of electromagnetic induction

  • Answered by AI
  • Q5. What is capacitor
  • Ans. 

    A capacitor is an electronic component that stores and releases electrical energy in a circuit.

    • Capacitors are used to filter out noise in electronic circuits.

    • They can also be used to store energy in flash cameras.

    • Capacitors are measured in farads, with smaller values denoted in microfarads or picofarads.

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Better good

Skills evaluated in this interview

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Don’t add your photo or details such as gender, age, and address in your resume. These details do not add any value.
View all tips
Round 2 - Technical 

(2 Questions)

  • Q1. About transformer protection and shut down process ....Etc
  • Q2. How Buchholz relay works?
  • Ans. 

    Buchholz relay is a protective device used in oil-filled transformers to detect and prevent faults.

    • It is installed between the transformer tank and conservator tank.

    • It detects the presence of gas or oil flow in the transformer oil.

    • It operates on the principle of gas collection and oil surge.

    • It sends an alarm signal to the control room in case of any fault.

    • It helps in preventing major faults and damage to the transforme

  • Answered by AI
Round 3 - Aptitude Test 

About relationship,Problems on age

Round 4 - Group Discussion 

GD on Line operation , Shutdown of ICT

Interview Preparation Tips

Interview preparation tips for other job seekers - Mind concentration should be sharp , Present of mind should be very sharp....before interviewer ...And don't thik what company will do for you always think what can you do for the company..
Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Properly align and format text in your resume. A recruiter will have to spend more time reading poorly aligned text, leading to high chances of rejection.
View all tips
Round 2 - Technical 

(2 Questions)

  • Q1. What is the process de-ashing the from esp to silo.
  • Ans. 

    De-ashing process from ESP to silo involves several steps.

    • The ash is collected in hoppers located at the bottom of the ESP.

    • The ash is then transported to the silo using a pneumatic conveying system.

    • The ash is stored in the silo until it can be disposed of properly.

    • Regular maintenance of the ESP and pneumatic conveying system is necessary to ensure efficient de-ashing.

    • Proper safety measures must be taken during the de-a

  • Answered by AI
  • Q2. What is the capacity of esp hoppers.
  • Ans. 

    The capacity of ESP hoppers varies depending on the size and model of the equipment.

    • ESP hoppers can range from a few hundred cubic feet to several thousand cubic feet in capacity.

    • The capacity can also depend on the type of material being collected in the hopper.

    • It is important to regularly monitor and maintain the hopper to prevent overfilling and potential equipment damage.

  • Answered by AI
Round 3 - One-on-one 

(1 Question)

  • Q1. I will pay you only this.

Interview Preparation Tips

Interview preparation tips for other job seekers - Worst things going inside the company they just making everyone life & growth in danger.

I applied via Naukri.com and was interviewed in Jun 2022. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Double-check your resume for any spelling mistakes. The recruiter may consider spelling mistakes as careless behavior or poor communication skills.
View all tips
Round 2 - Technical 

(2 Questions)

  • Q1. Hydraulic. Pneumatic
  • Q2. Pump. gearbox . Bearings

Interview Preparation Tips

Topics to prepare for Vestas Maintenance Technician interview:
  • Gearbox
Interview preparation tips for other job seekers - Skill and behaviour good performance and reliability
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Company Website and was interviewed before May 2023. There was 1 interview round.

Round 1 - Technical 

(3 Questions)

  • Q1. What is gear box and it's type
  • Ans. 

    A gear box is a mechanical device used to increase or decrease the speed or torque of a motor. Types include spur, helical, bevel, and worm gearboxes.

    • Gear box is a mechanical device that transmits power from one part of a machine to another.

    • It is used to increase or decrease the speed or torque of a motor.

    • Types of gear boxes include spur, helical, bevel, and worm gearboxes.

    • Spur gearboxes have straight teeth and are use...

  • Answered by AI
  • Q2. What is preventive maintenance
  • Ans. 

    Preventive maintenance is a proactive approach to maintenance that involves regularly scheduled inspections, repairs, and replacements to prevent equipment failure.

    • Regularly scheduled inspections to identify potential issues before they become major problems

    • Replacing worn out parts before they fail

    • Cleaning and lubricating equipment to prevent breakdowns

    • Updating software and firmware to ensure optimal performance

    • Example...

  • Answered by AI
  • Q3. Future of Wind sector in renewable energy
  • Ans. 

    The future of the wind sector in renewable energy looks promising with advancements in technology and increasing global demand for clean energy.

    • Continued growth in wind energy capacity worldwide

    • Technological advancements leading to more efficient wind turbines

    • Decreasing costs of wind energy production

    • Integration of wind power with energy storage solutions for better grid stability

    • Government support and policies promoti...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Interview level moderate
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I was interviewed before Jun 2022.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Do not use an unprofessional email address such as cool_boy@email.com. It shows a lack of professionalism by the candidate.
View all tips
Round 2 - Technical 

(2 Questions)

  • Q1. What is motor and MCB.
  • Ans. 

    A motor is a device that converts electrical energy into mechanical energy, while MCB stands for Miniature Circuit Breaker used for electrical protection.

    • Motor is a machine that converts electrical energy into mechanical energy

    • MCB is a Miniature Circuit Breaker used for electrical protection

    • Motors are commonly used in various applications such as fans, pumps, and conveyor belts

    • MCBs are designed to automatically switch ...

  • Answered by AI
  • Q2. Define the types of motor divice.
  • Ans. 

    Types of motor devices include AC motors, DC motors, stepper motors, and servo motors.

    • AC motors: commonly used in household appliances and industrial applications

    • DC motors: used in battery-operated devices and automotive applications

    • Stepper motors: used in precision positioning applications

    • Servo motors: used in robotics and automation for precise control

  • Answered by AI
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Walk-in and was interviewed before Nov 2022. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Be truthful in your resume. It is very easy to catch false or lies during the interview by asking basic questions.
View all tips
Round 2 - Technical 

(7 Questions)

  • Q1. Preventive maintenance related
  • Q2. Gear box related
  • Q3. Generator related
  • Q4. Yaw drive backless gap setting related
  • Q5. Generator alignment related
  • Q6. Tower toque related
  • Q7. Electrical error rectification related

Interview Questionnaire 

1 Question

  • Q1. 1.what have you perform any difficult maintenance Activities. 2.If DE System will Jam How will find out Phisically. 3.If beg on De system torn I would we find out.
  • Ans. 

    Answering questions related to difficult maintenance activities and troubleshooting DE system issues.

    • Performed difficult maintenance activities such as replacing a faulty gearbox in a wind turbine

    • To physically find out if DE system is jammed, I would inspect the system for any blockages or obstructions

    • If the bag on DE system is torn, I would conduct a visual inspection and check for any leaks or tears in the bag

  • Answered by AI

Wind World Interview FAQs

How many rounds are there in Wind World Junior Engineer - Maintenance interview?
Wind World interview process usually has 1 rounds. The most common rounds in the Wind World interview process are Technical.

Tell us how to improve this page.

Interview Questions from Similar Companies

Adani Group Interview Questions
3.9
 • 173 Interviews
NTPC Interview Questions
4.2
 • 156 Interviews
Tata Power Interview Questions
4.0
 • 156 Interviews
Suzlon Group Interview Questions
4.1
 • 121 Interviews
Torrent Power Interview Questions
3.8
 • 117 Interviews
Eaton Corporation Interview Questions
4.0
 • 112 Interviews
Vestas Interview Questions
4.3
 • 81 Interviews
GE Vernova Interview Questions
4.1
 • 80 Interviews
Hitachi Energy Interview Questions
4.1
 • 75 Interviews
Siemens Energy Interview Questions
4.2
 • 67 Interviews
View all

Wind World Junior Engineer - Maintenance Reviews and Ratings

based on 1 review

3.0/5

Rating in categories

3.0

Skill development

3.0

Work-Life balance

3.0

Salary & Benefits

3.0

Job Security

3.0

Company culture

3.0

Promotions/Appraisal

3.0

Work Satisfaction

Explore 1 Review and Rating
Assistant Engineer
281 salaries
unlock blur

₹2 L/yr - ₹6 L/yr

Junior Engineer
241 salaries
unlock blur

₹1.5 L/yr - ₹4.5 L/yr

Engineer
189 salaries
unlock blur

₹2.5 L/yr - ₹6.9 L/yr

Electrical Engineer
175 salaries
unlock blur

₹2.2 L/yr - ₹7.5 L/yr

Senior Engineer
166 salaries
unlock blur

₹3 L/yr - ₹8.5 L/yr

Explore more salaries
Compare Wind World with

Suzlon Group

4.1
Compare

Inox Wind

3.7
Compare

Siemens Gamesa Renewable Power Private Limited

4.1
Compare

Vestas

4.3
Compare

Calculate your in-hand salary

Confused about how your in-hand salary is calculated? Enter your annual salary (CTC) and get your in-hand salary
Did you find this page helpful?
Yes No
write
Share an Interview