Filter interviews by
Buchholz relay is a protective device used in oil-filled transformers to detect and prevent faults.
It is installed between the transformer tank and conservator tank.
It detects the presence of gas or oil flow in the transformer oil.
It operates on the principle of gas collection and oil surge.
It sends an alarm signal to the control room in case of any fault.
It helps in preventing major faults and damage to the transforme
About relationship,Problems on age
GD on Line operation , Shutdown of ICT
posted on 31 May 2024
Parameters of transmission line include resistance, inductance, capacitance, and conductance.
Resistance: opposition to the flow of current
Inductance: ability to store energy in a magnetic field
Capacitance: ability to store energy in an electric field
Conductance: ability to conduct electric current
Examples: coaxial cable, waveguide, twisted pair cable
Hysteresis curve is a graphical representation of the relationship between magnetic field strength and magnetization of a material.
It shows the lag between the magnetic field and the magnetization of a material.
It is used to study the magnetic properties of materials.
It is commonly used in the design of magnetic circuits and devices.
Examples include transformer cores, magnetic storage devices, and electric motors.
The s...
We use step-up transformers to reduce power loss during transmission by increasing voltage and decreasing current.
Step-up transformers increase voltage and decrease current, which reduces power loss during transmission.
This is because power loss is proportional to the square of the current, so reducing current reduces power loss.
For example, power is transmitted over long distances at high voltages (e.g. 500 kV) to red...
Power factor is the ratio of real power to apparent power in an AC circuit.
Power factor is a measure of how efficiently electrical power is being used.
It ranges from 0 to 1, with 1 being the most efficient.
A low power factor can result in higher energy costs and equipment damage.
Capacitors can be used to improve power factor.
Power factor is important in industries where large amounts of electrical power are used.
I applied via Other and was interviewed before Jul 2017. There were 3 interview rounds.
There are several types of dampings in case of vibration, including viscous damping, hysteretic damping, and structural damping.
Viscous damping: It occurs when a fluid or viscous material is used to dissipate energy and reduce vibration.
Hysteretic damping: It is caused by the internal friction within a material, which converts mechanical energy into heat.
Structural damping: It is inherent in the structure itself and is...
I applied via Campus Placement and was interviewed before Sep 2020. There were 4 interview rounds.
Induction Motor equivalent circuit consists of stator and rotor circuits with mutual induction.
The stator circuit includes three-phase winding and a power source.
The rotor circuit includes rotor winding and a short-circuited conductor.
The mutual induction between stator and rotor circuits causes the rotor to rotate.
The equivalent circuit can be represented using a circuit diagram with resistances, inductances, and mutu...
B-H curve is a graph that shows the relationship between magnetic field strength and magnetic flux density.
B-H curve is used to characterize the magnetic properties of a material.
It is a plot of magnetic flux density (B) versus magnetic field strength (H).
The slope of the curve at any point is the permeability of the material at that point.
The curve can be used to determine the saturation point of a material.
Examples o...
I applied via Campus Placement and was interviewed before Oct 2020. There was 1 interview round.
I applied via Walk-in and was interviewed in Dec 2020. There were 3 interview rounds.
The company culture is collaborative, innovative, and focused on continuous improvement.
Employees are encouraged to share ideas and work together to solve problems.
The company values creativity and rewards employees who come up with innovative solutions.
There is a strong emphasis on learning and development, with opportunities for training and career growth.
The company is committed to sustainability and social responsi...
I applied via Referral and was interviewed before Jul 2021. There was 1 interview round.
A multimeter is an electronic device used to measure voltage, current, and resistance in electrical circuits.
It can measure AC and DC voltage
It can measure AC and DC current
It can measure resistance
It can also measure other electrical parameters such as capacitance and frequency
It typically has a digital display for easy reading
Examples of multimeter brands include Fluke, Klein Tools, and Extech
I applied via Apprenticeship India and was interviewed in Mar 2021. There was 1 interview round.
Field Engineer
206
salaries
| ₹0 L/yr - ₹0 L/yr |
Field Supervisor
86
salaries
| ₹0 L/yr - ₹0 L/yr |
Graduate Apprentice Trainee
65
salaries
| ₹0 L/yr - ₹0 L/yr |
Electrical Engineer
62
salaries
| ₹0 L/yr - ₹0 L/yr |
Associate Engineer
58
salaries
| ₹0 L/yr - ₹0 L/yr |
NTPC
BHEL
Tata Power
Adani Power