Filter interviews by
I applied via Naukri.com and was interviewed before Dec 2020. There were 4 interview rounds.
I applied via Walk-in and was interviewed before Apr 2021. There were 3 interview rounds.
How your mind work.
posted on 26 Nov 2022
I applied via Approached by Company and was interviewed in Oct 2022. There were 3 interview rounds.
A set of questions related to safety officer's duties and responsibilities.
Work Permit System is a formal written system used to control certain types of work that are potentially hazardous.
An Emergency is an unexpected and potentially dangerous situation requiring immediate action.
Sandblasting is a process of cleaning or etching a surface using sand or other abrasive materials propelled by compressed air.
JSA stands fo...
I applied via Approached by Company and was interviewed in Mar 2023. There were 2 interview rounds.
Restricted area is a designated area where access is limited to authorized personnel only.
Restricted areas are typically marked with signs or barriers to indicate the restricted access.
Access to restricted areas is usually controlled through key cards, passwords, or security personnel.
Examples of restricted areas include server rooms, laboratories, and construction sites.
Unauthorized entry into a restricted area can re...
Documents required for lifting activity include risk assessment, lifting plan, equipment inspection records, and operator training records.
Risk assessment document to identify potential hazards and control measures
Lifting plan outlining the steps, equipment, and personnel involved in the lift
Equipment inspection records to ensure that lifting equipment is in good working condition
Operator training records to verify tha...
Excavation safety precautions are essential to prevent accidents and injuries on construction sites.
Ensure proper shoring and sloping of excavation walls to prevent collapses
Implement a permit system to control access to excavation sites
Provide adequate training for workers on excavation safety procedures
Regularly inspect excavation sites for hazards and address them promptly
Use protective equipment such as hard hats a
The safest distance for mechanical excavation near live lines or underground pipelines is at least 18 inches away.
Maintain a minimum distance of 18 inches from live lines or underground pipelines during mechanical excavation to prevent damage or accidents.
Always contact the utility company to locate and mark the exact location of underground pipelines before excavation.
Use non-destructive digging methods such as vacuum...
JSA stands for Job Safety Analysis, a process used to identify and control hazards in the workplace.
Identify the job or task to be analyzed
Break down the job into individual steps
Identify potential hazards for each step
Determine preventive measures to control the hazards
Communicate findings to workers and supervisors
I applied via Approached by Company and was interviewed in Sep 2023. There were 2 interview rounds.
posted on 15 Feb 2021
I applied via Naukri.com and was interviewed in Jan 2021. There were 5 interview rounds.
I will manage stress at the site by implementing effective stress management techniques.
I will prioritize tasks and create a schedule to ensure smooth workflow.
I will practice deep breathing exercises and mindfulness techniques to stay calm.
I will encourage open communication and provide support to the team members.
I will delegate tasks appropriately to avoid overwhelming myself.
I will take regular breaks and engage in...
As a Safety Manager, I would be responsible for preparing various legal documents to ensure compliance and promote safety in the workplace.
Safety policies and procedures
Incident reports and investigation documents
Training materials and manuals
Safety audits and inspection reports
Emergency response plans
Safety permits and licenses
Risk assessments and hazard identification documents
Yes, I have several innovative ideas for promoting a proactive safety culture.
Implementing a safety rewards program to incentivize safe behavior
Developing a safety training program that focuses on proactive hazard identification
Creating a safety committee that regularly reviews and updates safety policies and procedures
Utilizing technology such as wearables or sensors to monitor and prevent potential safety hazards
Enco...
Improving housekeeping in congestion and busy traffic zones requires effective planning, clear communication, and regular maintenance.
Develop a comprehensive housekeeping plan that includes regular cleaning schedules and designated areas for waste disposal.
Implement clear signage and markings to indicate designated walkways and traffic flow patterns.
Provide adequate training and education to employees on the importance...
TMP setup involves identifying potential hazards, determining control measures, and communicating the plan to workers.
Identify potential hazards in the work area
Determine appropriate control measures to mitigate the hazards
Communicate the TMP plan to workers and ensure understanding
Regularly review and update the TMP as necessary
ERT stands for Emergency Response Team. Their function is to respond to emergencies and provide immediate assistance.
ERT is responsible for responding to emergencies such as fires, natural disasters, and medical emergencies
They provide immediate assistance to those affected by the emergency
ERT members are trained in first aid, CPR, and other emergency response techniques
They may also be responsible for evacuating peopl...
Factor of safety is the ratio of the maximum stress a material can withstand to the actual stress it is subjected to.
Factor of safety is used to ensure that a structure or component can withstand loads without failure.
It is calculated by dividing the ultimate strength of a material by the maximum stress it is expected to experience.
A factor of safety of 2 means that the structure can withstand twice the maximum expecte...
posted on 28 Nov 2024
I applied via Campus Placement and was interviewed in Oct 2024. There was 1 interview round.
I appeared for an interview in Aug 2021.
Discuss
I applied via Walk-in and was interviewed in Oct 2022. There were 3 interview rounds.
About industrial safety, civil work , mechanical work (fabrication erection lifting)
Answers to questions related to safety officer role
Critical lifting refers to lifting operations that involve heavy loads or hazardous materials
Tandan lifting is a lifting technique where two cranes are used to lift a load in tandem
The capacity of a full body harness depends on the manufacturer and model, but it should be able to support the weight of the user and any equipment they are carrying
Documents required for v...
Colour codes for lifting belt and general safety equipment
Lifting belt colour code: Green for general purpose, yellow for chemical resistance, orange for high temperature, blue for food grade
General safety equipment colour code: Red for fire fighting, yellow for caution, green for first aid, blue for information
Colour codes may vary depending on industry and region
I applied via Recruitment Consulltant and was interviewed in Aug 2022. There were 3 interview rounds.
Risk assessment is the process of identifying, analyzing, and evaluating potential risks to determine the likelihood and impact of harm.
Identify potential hazards
Assess the likelihood and severity of harm
Evaluate the risk and determine appropriate control measures
Review and update the assessment regularly
Examples: workplace safety, environmental risks, financial risks
Job safety analysis is a process of identifying potential hazards and risks associated with a job or task.
It involves breaking down a job into individual steps
Identifying potential hazards and risks associated with each step
Developing controls and procedures to eliminate or reduce the risks
Ensuring that the controls and procedures are communicated to all workers involved in the job
Regularly reviewing and updating the j
Accident investigation involves gathering information, analyzing evidence, and identifying root causes.
Interview witnesses and gather statements
Examine the accident scene and collect physical evidence
Review safety procedures and training records
Identify contributing factors and root causes
Develop recommendations to prevent future accidents
Legal compliance of safety refers to the laws and regulations that organizations must follow to ensure workplace safety.
Organizations must comply with federal, state, and local safety regulations
Safety standards must be established and communicated to employees
Regular safety inspections and audits must be conducted
Accidents and incidents must be reported and investigated
Training and education programs must be provided ...
IS codes for fire extinguishers are standards set by the Bureau of Indian Standards (BIS) for ensuring quality and safety.
IS 15683:2006 - Specification for ABC powder type fire extinguishers
IS 13849:1993 - Specification for water type fire extinguishers
IS 940:2002 - Specification for carbon dioxide type fire extinguishers
IS 10204:1983 - Specification for foam type fire extinguishers
IS 13385:1992 - Specification for dry
OHS policy falls under Section 41-F of the Factories Act.
OHS policy is covered under the Factories Act, which is a comprehensive legislation governing the safety, health, and welfare of workers in factories.
Section 41-F of the Factories Act deals with the provisions related to the health and safety policy of the factory.
The OHS policy should be in writing and should be communicated to all workers in the factory.
The pol...
There are 5 types of fire extinguishers: water, foam, powder, CO2, and wet chemical.
Water extinguishers are used for Class A fires involving paper, wood, and textiles.
Foam extinguishers are used for Class A and B fires involving flammable liquids.
Powder extinguishers are used for Class A, B, and C fires involving flammable gases.
CO2 extinguishers are used for Class B and electrical fires.
Wet chemical extinguishers are ...
based on 4 reviews
Rating in categories
Assistant Manager
13
salaries
| ₹7.4 L/yr - ₹16 L/yr |
Production Engineer
9
salaries
| ₹2.5 L/yr - ₹4.8 L/yr |
Deputy Manager
7
salaries
| ₹5.5 L/yr - ₹10 L/yr |
Project Coordinator
6
salaries
| ₹4 L/yr - ₹6.4 L/yr |
Safety Officer
6
salaries
| ₹2.7 L/yr - ₹5.7 L/yr |
Lea Associates South Asia
R.V.R. PROJECTS
ABCI Infrastructures
VIKRAN Engineering & Exim