Filter interviews by
I applied via Campus Placement and was interviewed in Oct 2024. There was 1 interview round.
Top trending discussions
posted on 12 Oct 2024
I applied via Approached by Company and was interviewed in Sep 2024. There was 1 interview round.
LEL stands for Lower Explosive Limit, which is the minimum concentration of a gas or vapor in air that will ignite if a source of ignition is present.
LEL is used to determine the potential for a fire or explosion in a confined space.
Procedures for LEL testing involve using gas detection equipment to measure the concentration of a specific gas in the air.
If the LEL of a gas is exceeded, it indicates a potentially hazard...
Control of confined spaces is essential for ensuring the safety of workers in potentially hazardous environments.
Implementing a permit-to-work system to control access to confined spaces
Conducting thorough risk assessments before entry
Providing appropriate training for workers on confined space entry procedures
Using gas detectors and ventilation systems to monitor and control atmospheric conditions
Having a rescue plan
I applied via Approached by Company and was interviewed in Sep 2023. There were 2 interview rounds.
I applied via Approached by Company and was interviewed in Mar 2023. There were 2 interview rounds.
Restricted area is a designated area where access is limited to authorized personnel only.
Restricted areas are typically marked with signs or barriers to indicate the restricted access.
Access to restricted areas is usually controlled through key cards, passwords, or security personnel.
Examples of restricted areas include server rooms, laboratories, and construction sites.
Unauthorized entry into a restricted area can re...
Documents required for lifting activity include risk assessment, lifting plan, equipment inspection records, and operator training records.
Risk assessment document to identify potential hazards and control measures
Lifting plan outlining the steps, equipment, and personnel involved in the lift
Equipment inspection records to ensure that lifting equipment is in good working condition
Operator training records to verify tha...
Excavation safety precautions are essential to prevent accidents and injuries on construction sites.
Ensure proper shoring and sloping of excavation walls to prevent collapses
Implement a permit system to control access to excavation sites
Provide adequate training for workers on excavation safety procedures
Regularly inspect excavation sites for hazards and address them promptly
Use protective equipment such as hard hats a
The safest distance for mechanical excavation near live lines or underground pipelines is at least 18 inches away.
Maintain a minimum distance of 18 inches from live lines or underground pipelines during mechanical excavation to prevent damage or accidents.
Always contact the utility company to locate and mark the exact location of underground pipelines before excavation.
Use non-destructive digging methods such as vacuum...
JSA stands for Job Safety Analysis, a process used to identify and control hazards in the workplace.
Identify the job or task to be analyzed
Break down the job into individual steps
Identify potential hazards for each step
Determine preventive measures to control the hazards
Communicate findings to workers and supervisors
posted on 26 Nov 2022
I applied via Approached by Company and was interviewed in Oct 2022. There were 3 interview rounds.
A set of questions related to safety officer's duties and responsibilities.
Work Permit System is a formal written system used to control certain types of work that are potentially hazardous.
An Emergency is an unexpected and potentially dangerous situation requiring immediate action.
Sandblasting is a process of cleaning or etching a surface using sand or other abrasive materials propelled by compressed air.
JSA stands fo...
I applied via Walk-in and was interviewed before Mar 2021. There were 2 interview rounds.
I applied via Campus Placement and was interviewed in Apr 2024. There was 1 interview round.
I am from a small town in the Midwest and I am passionate about environmental conservation.
I grew up in a close-knit community in the Midwest
I have always been interested in protecting the environment
I enjoy outdoor activities like hiking and gardening
I have a Bachelor's degree in Computer Science from XYZ University.
Bachelor's degree in Computer Science
Graduated from XYZ University
Specialized in software development
posted on 15 Jul 2024
I applied via Approached by Company and was interviewed in Jun 2024. There was 1 interview round.
I applied via Recruitment Consulltant and was interviewed in Mar 2022. There was 1 interview round.
Compressor troubleshooting involves identifying and resolving issues with the compressor in a system.
Check for leaks in the system
Inspect the compressor for damage or wear
Check the electrical connections and wiring
Monitor the pressure and temperature readings
Clean or replace air filters
Check the oil level and quality
Inspect the belts and pulleys for wear or damage
posted on 5 May 2023
I applied via Recruitment Consulltant and was interviewed before May 2022. There was 1 interview round.
I have extensive commercial experience related to client billing.
Managed client billing for a software company, ensuring timely and accurate invoicing
Developed and implemented billing processes for a consulting firm, resulting in a 20% increase in revenue
Collaborated with sales team to resolve billing discrepancies and improve client satisfaction
based on 2 interviews
Interview experience
based on 2 reviews
Rating in categories
Software Developer
238
salaries
| ₹14.6 L/yr - ₹38 L/yr |
Software Engineer
162
salaries
| ₹17.3 L/yr - ₹41.6 L/yr |
Manager
149
salaries
| ₹11.9 L/yr - ₹45.2 L/yr |
Engineer
116
salaries
| ₹14.8 L/yr - ₹41.7 L/yr |
Assistant Manager
84
salaries
| ₹4.8 L/yr - ₹14.4 L/yr |
VIKRAN Engineering & Exim
The Louis Berger Group
Nesma & Partners
El Seif Engineering Contracting