Upload Button Icon Add office photos

VISA Steel

Compare button icon Compare button icon Compare

Filter interviews by

VISA Steel ITI Electrician Interview Questions and Answers

Updated 8 Mar 2022

VISA Steel ITI Electrician Interview Experiences

1 interview found

Round 1 - Technical 

(1 Question)

  • Q1. Control circuit diagram of stater
  • Ans. 

    A control circuit diagram of a starter is a schematic representation of the electrical connections and components used to control the operation of a motor starter.

    • The control circuit diagram typically includes a power source, control transformer, control devices such as push buttons and switches, and protective devices such as fuses and circuit breakers.

    • The diagram also shows the connections between these components an...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Please tell me standard question

Interview questions from similar companies

Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
2-4 weeks
Result
Selected Selected

I applied via Walk-in and was interviewed in May 2024. There was 1 interview round.

Round 1 - Technical 

(4 Questions)

  • Q1. What is Rj 45 Connector
  • Ans. 

    RJ45 connector is a standardized physical interface for connecting Ethernet cables to network devices.

    • RJ45 connector is commonly used for Ethernet networking.

    • It has 8 pins that are used to transmit data.

    • RJ45 connectors are used in networking equipment like routers, switches, and computers.

    • They are also used for connecting devices like printers, IP cameras, and VoIP phones.

  • Answered by AI
  • Q2. What is pvc pipe
  • Ans. 

    PVC pipe is a type of plastic pipe commonly used in plumbing and electrical applications.

    • PVC stands for polyvinyl chloride

    • It is lightweight, durable, and resistant to corrosion

    • Commonly used for water supply lines, drainage systems, and electrical conduit

    • Available in various sizes and colors for different applications

  • Answered by AI
  • Q3. What is causing Chapin
  • Ans. 

    Chapin is caused by a short circuit in an electrical system.

    • Chapin is caused by a short circuit, which occurs when a current bypasses the normal load path and flows through an unintended path.

    • Short circuits can be caused by damaged insulation, loose connections, or faulty equipment.

    • Short circuits can lead to overheating, fires, and damage to electrical components.

    • Proper insulation, regular maintenance, and using high-q...

  • Answered by AI
  • Q4. What we use Rj 45 Connector
  • Ans. 

    RJ45 connectors are used for connecting Ethernet cables to networking devices such as computers, routers, and switches.

    • Used for connecting Ethernet cables

    • Commonly used in networking devices like computers, routers, and switches

    • Has 8 pins for data transmission

    • Provides a secure and reliable connection

  • Answered by AI

Skills evaluated in this interview

Interview experience
5
Excellent
Difficulty level
Hard
Process Duration
2-4 weeks
Result
Selected Selected

I applied via Naukri.com and was interviewed in Mar 2024. There were 2 interview rounds.

Round 1 - One-on-one 

(2 Questions)

  • Q1. What is Transformer maintenance
  • Ans. 

    Transformer maintenance involves regular inspection, testing, and servicing to ensure optimal performance and prevent breakdowns.

    • Regularly inspecting for signs of wear and tear

    • Testing insulation resistance to prevent short circuits

    • Servicing cooling systems to prevent overheating

    • Checking oil levels and quality for proper lubrication

    • Cleaning and tightening connections for efficient operation

  • Answered by AI
  • Q2. What is motor ?
  • Ans. 

    A motor is a device that converts electrical energy into mechanical energy to perform work.

    • Motors are commonly used in various applications such as industrial machinery, household appliances, and vehicles.

    • There are different types of motors including AC motors, DC motors, and servo motors.

    • Motors consist of a rotor, stator, and various components such as windings, bearings, and brushes.

    • Examples of motors include electri

  • Answered by AI
Round 2 - One-on-one 

(2 Questions)

  • Q1. What is vcb ?
  • Ans. 

    VCB stands for Vacuum Circuit Breaker, which is a type of circuit breaker that uses vacuum as the arc quenching medium.

    • VCB is used to interrupt the current flow in a circuit by creating a gap between contacts where the arc is extinguished in a vacuum.

    • It is commonly used in medium voltage power systems for its high reliability and low maintenance requirements.

    • VCBs are preferred over other types of circuit breakers in ap...

  • Answered by AI
  • Q2. What is ohm ?
  • Ans. 

    Ohm is the unit of electrical resistance in the International System of Units (SI).

    • Ohm is represented by the symbol Ω.

    • It is named after German physicist Georg Simon Ohm.

    • One ohm is equal to the resistance of a conductor in which a current of one ampere is produced by a potential difference of one volt.

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - I like u 👍
Interview experience
1
Bad
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Company Website and was interviewed in Jul 2023. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(5 Questions)

  • Q1. Yes I am ready for test
  • Ans. 

    Yes I am all ready interview technician

  • Answered by RAHUL KUMAR
  • Q2. Yes I am hard working
  • Ans. 

    Yes I am hard working tata steel company

  • Answered by RAHUL KUMAR
  • Q3. Motor drive sensor
  • Ans. 

    Yes iam motor vfd drive work

  • Answered by RAHUL KUMAR
  • Q4. Macinical dol star delta
  • Ans. 

    Yes I am working electrical dol delta

  • Answered by RAHUL KUMAR
  • Q5. All electrician work

Interview Preparation Tips

Interview preparation tips for other job seekers - I AM hard working
Interview experience
5
Excellent
Difficulty level
Hard
Process Duration
2-4 weeks
Result
Selected Selected

I applied via Naukri.com and was interviewed in Mar 2024. There was 1 interview round.

Round 1 - One-on-one 

(3 Questions)

  • Q1. What is transformer ?
  • Ans. 

    A transformer is a device that transfers electrical energy between two or more circuits through electromagnetic induction.

    • Consists of two coils of wire, known as primary and secondary windings

    • Works on the principle of electromagnetic induction

    • Used to step up or step down voltage levels

    • Commonly used in power distribution systems

    • Examples include power transformers, distribution transformers, and instrument transformers

  • Answered by AI
  • Q2. What is motor ?
  • Ans. 

    A motor is a device that converts electrical energy into mechanical energy to perform work.

    • Motors are commonly used in various applications such as industrial machinery, household appliances, and vehicles.

    • There are different types of motors including AC motors, DC motors, and servo motors.

    • Motors consist of a rotor, stator, and various components such as windings, bearings, and brushes.

    • The rotation of the motor is gener...

  • Answered by AI
  • Q3. What is vcb ?
  • Ans. 

    VCB stands for Vacuum Circuit Breaker, which is a type of circuit breaker that uses vacuum as the arc quenching medium.

    • VCB is used to interrupt the current flow in a circuit by creating a gap between contacts where the arc is extinguished in a vacuum.

    • It is commonly used in medium voltage power systems for its high reliability and fast interruption speed.

    • VCBs require less maintenance compared to other types of circuit b...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - I like these compani 👍

Skills evaluated in this interview

Interview experience
5
Excellent
Difficulty level
-
Process Duration
2-4 weeks
Result
Not Selected

I applied via AmbitionBox

Round 1 - Technical 

(1 Question)

  • Q1. How much terminal in polly phase meter
  • Ans. 

    A polyphase meter typically has three terminals.

    • Polyphase meters are used to measure electrical energy in three-phase systems.

    • These meters have three terminals, each corresponding to a phase (usually labeled as L1, L2, and L3).

    • The three-phase system allows for more efficient power distribution and is commonly used in industrial and commercial settings.

    • Examples of polyphase meters include electromechanical induction met

  • Answered by AI

Interview Preparation Tips

Topics to prepare for JSW Steel ITI Electrician interview:
  • Electrical Maintenance
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
More than 8 weeks
Result
Not Selected

I applied via Campus Placement and was interviewed before Jan 2022. There was 1 interview round.

Round 1 - Technical 

(4 Questions)

  • Q1. Types of MCB... Tyeps of electrical Enstrument.. Types of electrical used panel
  • Ans. 

    MCB stands for Miniature Circuit Breaker. It is a type of electrical switch that automatically shuts off the electrical circuit during an overload or short circuit.

    • Types of MCB include Single Pole MCB, Double Pole MCB, Triple Pole MCB, and Four Pole MCB.

    • Other types of electrical instruments include Voltmeter, Ammeter, Multimeter, Oscilloscope, and Earth Tester.

    • Types of electrical panels commonly used are Distribution P...

  • Answered by AI
  • Q2. AC/ DC Defrents... How many electrical tyeps of switch
  • Ans. 

    AC and DC are two types of electrical current. There are several types of switches used in electrical circuits.

    • AC stands for Alternating Current and DC stands for Direct Current.

    • AC current changes direction periodically while DC current flows in one direction only.

    • Types of switches include toggle switches, rocker switches, push-button switches, and rotary switches.

    • Switches can be classified based on their function, suc...

  • Answered by AI
  • Q3. Alterneting current... And directl current... Piano switch.. Udne switch
  • Q4. MCB..MPCB ..LCB.. ELCB
  • Ans. 
    1. Minicher circuits brekar

    2. Motor protection circuits brekar

    3. Last circuits Brekar

    4. Earth leakage circuits brekar

  • Answered Anonymously

Interview Preparation Tips

Interview preparation tips for other job seekers - Deuty is most important en life... In very proudly fell is my deuty
Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(4 Questions)

  • Q1. Eot crane mentnas
  • Q2. Power and control warning
  • Q3. Eot crane operator
  • Q4. HT. and LT line

I applied via Naukri.com and was interviewed before Jan 2021. There were 3 interview rounds.

Interview Questionnaire 

5 Questions

  • Q1. Chemical analysis of chromite ore by ICP OES
  • Ans. 

    ICP OES is a technique used for chemical analysis of chromite ore.

    • ICP OES stands for Inductively Coupled Plasma Optical Emission Spectroscopy.

    • It is a powerful analytical technique used for the determination of trace elements in a variety of matrices.

    • ICP OES can be used to determine the concentration of elements such as Cr, Fe, Mg, Al, and Si in chromite ore.

    • The technique involves the excitation of atoms in a sample usi...

  • Answered by AI
  • Q2. Principle of ICP oes
  • Ans. 

    ICP-OES is a technique used for elemental analysis in which a sample is vaporized and excited by a plasma to emit light.

    • ICP-OES stands for Inductively Coupled Plasma Optical Emission Spectroscopy.

    • It is used to determine the concentration of elements in a sample.

    • The sample is vaporized and excited by a plasma to emit light, which is then analyzed to determine the elemental composition.

    • ICP-OES is commonly used in environ...

  • Answered by AI
  • Q3. Weight chemical analysis of chromite ore
  • Ans. 

    Weight chemical analysis of chromite ore involves determining the percentage of various elements present in the ore.

    • The ore is first crushed and ground into a fine powder.

    • The powder is then mixed with various chemicals to dissolve the elements of interest.

    • The resulting solution is then analyzed using various techniques such as atomic absorption spectroscopy or inductively coupled plasma mass spectrometry.

    • The percentage...

  • Answered by AI
  • Q4. Knowledge of NABL
  • Q5. Knowledge of ISO 17025,ISO 9001,ISO 450001, IMS

Interview Preparation Tips

Interview preparation tips for other job seekers - Be confident and be calm whenever u will give your interview.
Interview experience
5
Excellent
Difficulty level
Hard
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via AmbitionBox and was interviewed in Dec 2023. There was 1 interview round.

Round 1 - Technical 

(5 Questions)

  • Q1. Company working
  • Q2. Company working electrical
  • Q3. Dol starter R dal starter star delta stater rewash forward starter
  • Q4. 2800 tan presh breakdown heldel
  • Q5. 700 tan presh breakdown heldel

Interview Preparation Tips

Interview preparation tips for other job seekers - Hard working

VISA Steel Interview FAQs

How many rounds are there in VISA Steel ITI Electrician interview?
VISA Steel interview process usually has 1 rounds. The most common rounds in the VISA Steel interview process are Technical.

Tell us how to improve this page.

VISA Steel ITI Electrician Reviews and Ratings

based on 1 review

4.0/5

Rating in categories

4.0

Skill development

3.0

Work-life balance

4.0

Salary

4.0

Job security

4.0

Company culture

4.0

Promotions

4.0

Work satisfaction

Explore 1 Review and Rating
Assistant Manager
77 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Deputy Manager
44 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Manager
34 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Senior Engineer
21 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Engineer
19 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Explore more salaries
Compare VISA Steel with

Tata Steel

4.1
Compare

JSW Steel

3.9
Compare

Steel Authority Of India

4.1
Compare

ArcelorMittal Nippon Steel

4.1
Compare
Did you find this page helpful?
Yes No
write
Share an Interview