Upload Button Icon Add office photos

Viraj Profiles

Compare button icon Compare button icon Compare

Filter interviews by

Viraj Profiles Senior Quality Engineer Interview Questions and Answers

Updated 30 May 2021

Viraj Profiles Senior Quality Engineer Interview Experiences

1 interview found

I applied via Referral and was interviewed in Nov 2020. There were 5 interview rounds.

Interview Questionnaire 

2 Questions

  • Q1. Standard of ut testing and tensile testing impact testing etc. Procedure and work instructions
  • Ans. 

    Standard procedures for UT, tensile and impact testing

    • UT testing follows ASTM E164 standards

    • Tensile testing follows ASTM E8 standards

    • Impact testing follows ASTM E23 standards

    • Work instructions should include equipment calibration, sample preparation, and testing procedures

    • Documentation of results and analysis should be included in the work instructions

  • Answered by AI
  • Q2. ASTM a 388 ASTM 370 etc..

Interview Preparation Tips

Interview preparation tips for other job seekers - Boost up your basic concepts so that you can face them confidently

Interview questions from similar companies

I was interviewed in Jul 2017.

Interview Preparation Tips

Round: Resume Shortlist
Experience: Ash handling system in thermal power plant operation & maintenance
Tips: Vaccum system

Skills: Engineering Basics

I was interviewed in Sep 2017.

Interview Preparation Tips

Round: Resume Shortlist
Experience: Mechanical engineer
Tips: Strong knowledge of mechanical maintenance

Round: Group Discussion
Duration: 1 hour

Skills: Mechanical Engineering Basics

I was interviewed in Jun 2017.

Interview Questionnaire 

8 Questions

  • Q1. Percentage of carbon presence in cast iron
  • Ans. 

    The percentage of carbon presence in cast iron varies from 2.1% to 6.67% depending on the type of cast iron.

    • Cast iron is classified into four types based on its carbon content: white, gray, ductile, and malleable.

    • White cast iron has the highest carbon content, ranging from 2.1% to 6.67%.

    • Gray cast iron has a lower carbon content, ranging from 2.5% to 4%.

    • Ductile cast iron has a carbon content of 3.2% to 4.1%.

    • Malleable ca...

  • Answered by AI
  • Q2. What did u mean by addendum in gears
  • Ans. 

    Addendum is the height of the tooth above the pitch circle in a gear.

    • Addendum is the distance between the pitch circle and the top of the gear tooth.

    • It is an important parameter in gear design as it affects the strength and durability of the gear.

    • The addendum can be calculated using the formula addendum = module or diametral pitch.

    • For example, in a gear with a module of 2mm, the addendum would be 2mm.

    • Addendum is the op...

  • Answered by AI
  • Q3. Least count of varnier calipers
  • Ans. 

    The least count of vernier calipers is the smallest measurement that can be accurately read on the scale.

    • The least count is determined by the number of divisions on the main scale and the vernier scale.

    • It is calculated by dividing the smallest division on the main scale by the number of divisions on the vernier scale.

    • For example, if the smallest division on the main scale is 0.1 mm and the vernier scale has 10 division

  • Answered by AI
  • Q4. Tell me something about ur company where u are working ?
  • Ans. 

    I work for a leading engineering firm specializing in designing and manufacturing industrial machinery.

    • We have a team of experienced mechanical engineers who work on various projects

    • Our company focuses on innovation and cutting-edge technology in our designs

    • We have successfully completed projects for clients in the automotive and aerospace industries

  • Answered by AI
  • Q5. Tell me your family background ?
  • Ans. 

    I come from a close-knit family with a strong emphasis on education and hard work.

    • My parents are both engineers, so I grew up with a passion for problem-solving and innovation.

    • I have two siblings, one of whom is also pursuing a career in engineering.

    • Family gatherings often involve discussions about new technologies and projects we are working on.

    • My family has always been supportive of my academic and career pursuits.

  • Answered by AI
  • Q6. Tell me something about yourself ?
  • Ans. 

    I am a passionate mechanical engineer with a strong background in designing and implementing innovative solutions.

    • Graduated with a degree in Mechanical Engineering from XYZ University

    • Completed internships at ABC Company and gained hands-on experience in CAD software

    • Led a team project to design and build a prototype for a new cooling system

    • Continuously learning and staying updated on the latest industry trends and techn

  • Answered by AI
  • Q7. Why are u join this company ?
  • Ans. 

    I am joining this company because of its reputation for innovation and commitment to employee growth.

    • Opportunity to work on cutting-edge projects

    • Strong focus on professional development

    • Positive company culture and values

    • Potential for career advancement

    • Desire to contribute to a successful team

  • Answered by AI
  • Q8. Why I hire u?
  • Ans. 

    I have a strong background in mechanical engineering with hands-on experience in designing and implementing innovative solutions.

    • Extensive knowledge in mechanical engineering principles and practices

    • Proven track record of successfully completing projects on time and within budget

    • Strong problem-solving skills and ability to think creatively

    • Experience in using CAD software for design and analysis

    • Excellent communication a...

  • Answered by AI

Interview Preparation Tips

Round: Technical Interview
Experience: I hv cleared

Round: HR Interview
Experience: I was narvous and rejected.

Skills: Way Of Answering

I applied via Walk-in and was interviewed in Aug 2021. There was 1 interview round.

Interview Questionnaire 

1 Question

  • Q1. What manufacturing in company?

Interview Preparation Tips

Interview preparation tips for other job seekers - Interview for mechanical engineering related questions

I applied via Walk-in and was interviewed before Aug 2020. There was 1 interview round.

Interview Questionnaire 

1 Question

  • Q1. How to apply jsw steel plant
  • Ans. 

    To apply for JSW Steel Plant, visit their official website and look for job openings. Submit your resume and application online.

    • Visit JSW Steel Plant's official website

    • Look for job openings and requirements

    • Submit your resume and application online

    • Prepare for interviews and assessments

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Interview will written test then personal interview in office

I applied via Company Website and was interviewed before Jun 2020. There was 1 interview round.

Interview Questionnaire 

3 Questions

  • Q1. Qualification only
  • Q2. Maintenance related
  • Q3. Bearing and gear information

Interview Preparation Tips

Interview preparation tips for other job seekers - Machinecal maintenance engineering sms 2 & mines area Experience

I applied via Naukri.com and was interviewed in Oct 2019. There were 4 interview rounds.

Interview Questionnaire 

1 Question

  • Q1. They asked about besics of all mechanical subjects like Mechanics, fluid, theory of machine and manufacturing processes mainly as a technical interview

Interview Preparation Tips

Interview preparation tips for other job seekers - After exam they conduct technical interview where they ask about steel making processes and About your past experience if you have

I applied via Walk-in and was interviewed in Jun 2021. There was 1 interview round.

Interview Questionnaire 

1 Question

  • Q1. Company related question

Interview Preparation Tips

Interview preparation tips for other job seekers - I do my level best & I do hard work honestly
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
2-4 weeks
Result
Selected Selected

I applied via Referral and was interviewed before Jan 2023. There was 1 interview round.

Round 1 - HR 

(4 Questions)

  • Q1. Why do you wanna join here.
  • Q2. How does engine work
  • Ans. 

    An engine works by converting fuel into mechanical energy through a series of combustion and mechanical processes.

    • Engines typically have cylinders where fuel is ignited and combustion occurs.

    • The combustion process creates high-pressure gases that push pistons, which in turn rotate the crankshaft.

    • The crankshaft converts the linear motion of the pistons into rotational motion.

    • This rotational motion is then transferred to...

  • Answered by AI
  • Q3. Function of flywheel
  • Ans. 

    A flywheel is a mechanical device used to store rotational energy and provide stability to a system.

    • Stores kinetic energy and releases it when needed

    • Maintains rotational momentum

    • Provides stability and smooth operation

    • Used in various applications like engines, power plants, and energy storage systems

  • Answered by AI
  • Q4. Steel types and explain all
  • Ans. 

    Steel types are classified based on their composition and properties.

    • Carbon Steel: Contains primarily carbon and iron. Examples include low carbon steel, medium carbon steel, and high carbon steel.

    • Alloy Steel: Contains additional elements such as manganese, nickel, chromium, or molybdenum to enhance properties. Examples include stainless steel, tool steel, and high-strength low-alloy steel.

    • Stainless Steel: Contains a m...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Just do your best.

Viraj Profiles Interview FAQs

What are the top questions asked in Viraj Profiles Senior Quality Engineer interview?

Some of the top questions asked at the Viraj Profiles Senior Quality Engineer interview -

  1. Standard of ut testing and tensile testing impact testing etc. Procedure and ...read more
  2. ASTM a 388 ASTM 370 et...read more

Tell us how to improve this page.

Interview Questions from Similar Companies

Tata Steel Interview Questions
4.1
 • 822 Interviews
JSW Steel Interview Questions
3.9
 • 595 Interviews
Jindal Stainless Interview Questions
4.2
 • 207 Interviews
JSW Group Interview Questions
3.9
 • 109 Interviews
Jindal Saw Interview Questions
4.0
 • 99 Interviews
Rashmi Metaliks Interview Questions
3.4
 • 80 Interviews
View all
Viraj Profiles Senior Quality Engineer Salary
based on 6 salaries
₹4.2 L/yr - ₹4.8 L/yr
47% less than the average Senior Quality Engineer Salary in India
View more details

Viraj Profiles Senior Quality Engineer Reviews and Ratings

based on 3 reviews

3.4/5

Rating in categories

3.4

Skill development

3.4

Work-life balance

3.0

Salary

2.8

Job security

3.0

Company culture

2.4

Promotions

2.4

Work satisfaction

Explore 3 Reviews and Ratings
Assistant Engineer
194 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Production Engineer
155 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Assistant Manager
134 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Senior Engineer
115 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Engineer
104 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Explore more salaries
Compare Viraj Profiles with

Jindal Stainless

4.2
Compare

Salem Stainless Steel Suppliers

4.0
Compare

Hisar Metal Industries

1.2
Compare

Ratnamani Metals and Tubes

4.4
Compare
Did you find this page helpful?
Yes No
write
Share an Interview