Filter interviews by
I applied via Walk-in and was interviewed in Oct 2021. There was 1 interview round.
I applied via Walk-in and was interviewed in Oct 2021. There was 1 interview round.
posted on 26 Feb 2024
I applied via Approached by Company and was interviewed in Oct 2023. There were 3 interview rounds.
About Experience Related
Skill Assessment of cability.
posted on 30 Jun 2024
I applied via AmbitionBox and was interviewed in May 2024. There were 2 interview rounds.
I applied via Naukri.com and was interviewed in Feb 2023. There were 2 interview rounds.
posted on 4 Jan 2023
Home load of a power plant is received through a distribution network.
Home load is received from the power plant through a distribution network.
The power plant generates electricity and sends it to a substation.
The substation then distributes the electricity to homes through power lines.
The distribution network ensures that the electricity reaches each home efficiently.
Examples of distribution networks include overhead
A blackout condition refers to a complete loss of electrical power in a specific area or across a larger region.
Blackouts can be caused by various factors such as equipment failure, severe weather conditions, or intentional power cuts.
During a blackout, all electrical devices and systems dependent on electricity cease to function.
Blackouts can last for a few seconds, minutes, hours, or even days depending on the cause ...
posted on 28 Dec 2022
I applied via Naukri.com and was interviewed in Jun 2022. There were 2 interview rounds.
ATS stands for Automatic Transfer Switch. It is used to transfer power supply between two sources. Transformer and motor maintenance procedures and protection methods are essential for their efficient operation. SAP is a software used for enterprise resource planning.
ATS is used to automatically switch power supply between two sources, ensuring uninterrupted power supply.
Transformer maintenance involves regular inspect...
HT motor rating is the maximum power it can handle and FLC is the current it draws at full load.
HT motor rating is expressed in kilowatts (kW) or megawatts (MW).
FLC of HT motor is the full load current it draws at rated voltage and frequency.
FLC is expressed in amperes (A) and varies depending on the motor's power rating and efficiency.
For example, a 1 MW HT motor may have a FLC of 1000 A at 11 kV.
The rating and FLC of...
Plant EHT system and single line diagram of plants.
EHT system refers to Extra High Tension system used in power plants
Single line diagram shows the electrical connections between different components
It is important to have a clear and accurate diagram for safety and maintenance purposes
I applied via Campus Placement and was interviewed in Jun 2022. There were 3 interview rounds.
Home's law is a principle that states that the current flowing through a conductor is directly proportional to the voltage applied across it.
Home's law is also known as Ohm's law.
It is expressed as I = V/R, where I is the current, V is the voltage, and R is the resistance.
This law is fundamental to the study of electrical circuits and is used to calculate the behavior of circuits.
For example, if the voltage across a re...
The current unit is the ampere (A), which measures the flow of electric charge.
The unit of electric current is the ampere (A).
Current is the rate of flow of electric charge.
It is measured using an ammeter.
One ampere is equal to one coulomb of charge passing through a point in one second.
Voltage is the unit of measurement for electric potential difference.
Voltage is the force that pushes electric charges through a circuit.
It is measured in volts (V).
Voltage is essential for the operation of electrical devices.
Examples of voltage units include millivolts (mV), kilovolts (kV), and megavolts (MV).
Ohm's law states that the current flowing through a conductor is directly proportional to the voltage applied across it.
Ohm's law is expressed as V = I * R, where V is the voltage, I is the current, and R is the resistance.
The current symbol is represented by the letter 'I'.
Ohm's law is fundamental in understanding and analyzing electrical circuits.
Example: If a circuit has a voltage of 12 volts and a resistance of 4 o...
The two types of winding in electrical engineering are lap winding and wave winding.
Lap winding is used in DC machines and is characterized by multiple parallel paths for current flow.
Wave winding is used in AC machines and is characterized by a single path for current flow.
Lap winding provides high current capacity and low voltage output, while wave winding provides low current capacity and high voltage output.
In lap ...
The primary winding is the first coil in a transformer that receives electrical energy.
The primary winding is typically connected to the power source.
It is responsible for receiving and transmitting electrical energy to the secondary winding.
The number of turns in the primary winding determines the voltage ratio between the primary and secondary sides.
Primary windings are commonly found in transformers, induction motor
I applied via Referral and was interviewed in Apr 2022. There were 2 interview rounds.
UPS, transformer materials, circuit breakers, and substation equipment are all important components of electrical maintenance.
UPS (Uninterruptible Power Supply) provides backup power in case of power outages.
Transformer materials include copper wire, iron core, and insulation materials.
Circuit breakers protect electrical circuits from damage caused by overloading or short circuits.
Substation equipment includes transfor...
Circuit breakers are devices that protect electrical circuits from overloads and short circuits. MCCB stands for Molded Case Circuit Breaker. Ohm's Law relates voltage, current, and resistance in a circuit.
Types of circuit breakers include miniature circuit breakers (MCBs), molded case circuit breakers (MCCBs), and residual current circuit breakers (RCCBs).
MCCB is a type of circuit breaker that provides protection agai...
posted on 27 Feb 2022
I can contribute to the company by utilizing my technical skills and knowledge to solve electrical engineering problems and improve efficiency.
Providing innovative solutions to electrical engineering challenges
Implementing cost-effective measures to improve efficiency
Collaborating with team members to achieve project goals
Ensuring compliance with safety standards and regulations
Continuously updating knowledge and skill
To activate the company, focus on strategic planning, effective marketing, strong leadership, and fostering a positive work culture.
Develop a strategic plan that outlines the company's goals, objectives, and strategies for growth.
Implement effective marketing strategies to promote the company's products or services and attract customers.
Ensure strong leadership by hiring competent managers, providing training and devel...
Material Coordinator
6
salaries
| ₹4.2 L/yr - ₹8.6 L/yr |
Coordinator
4
salaries
| ₹6.3 L/yr - ₹9 L/yr |
HR Generalist
4
salaries
| ₹7.2 L/yr - ₹12 L/yr |
Instrumentation Technician
4
salaries
| ₹2.1 L/yr - ₹15.7 L/yr |
Material Controller
4
salaries
| ₹6 L/yr - ₹15.3 L/yr |
Larsen & Toubro Limited
TCS
BHEL
Reliance Industries