Upload Button Icon Add office photos
Engaged Employer

i

This company page is being actively managed by UNO Minda Team. If you also belong to the team, you can get access from here

UNO Minda Verified Tick

Compare button icon Compare button icon Compare

Filter interviews by

UNO Minda CMM Programmer Interview Questions, Process, and Tips

Updated 30 Jun 2024

UNO Minda CMM Programmer Interview Experiences

1 interview found

Interview experience
4
Good
Difficulty level
Moderate
Process Duration
4-6 weeks
Result
Selected Selected

I applied via Referral and was interviewed in Dec 2023. There were 3 interview rounds.

Round 1 - Technical 

(5 Questions)

  • Q1. What is gd and t?
  • Ans. 

    GD&T stands for Geometric Dimensioning and Tolerancing, a system for defining and communicating engineering tolerances.

    • GD&T is a system used to define and communicate engineering tolerances for parts and assemblies.

    • It uses symbols, dimensions, and tolerances to specify the geometric characteristics of a part.

    • GD&T helps ensure that parts fit together properly and function as intended.

    • Examples of GD&T symbols include con

  • Answered by AI
  • Q2. Difference between surface profile and line profile.?
  • Ans. 

    Surface profile refers to the overall shape of a surface, while line profile refers to the cross-sectional shape along a specific line.

    • Surface profile describes the general shape and features of a surface, such as flatness, waviness, and roughness.

    • Line profile focuses on the cross-sectional shape along a specific line on the surface, providing detailed information about variations in height or depth along that line.

    • Sur...

  • Answered by AI
  • Q3. How to find cordinates of pcd circles ?
  • Ans. 

    To find coordinates of PCD circles, use a coordinate measuring machine (CMM) to measure the center points and radii of the circles.

    • Use a CMM to measure the center point (X, Y) and radius (R) of each circle.

    • Calculate the coordinates of the PCD circles based on the measured center points and radii.

    • PCD circles are typically used in engineering for positioning holes or features on a part.

    • Example: If the center point of a c...

  • Answered by AI
  • Q4. What is RPS alignment?
  • Ans. 

    RPS alignment stands for Renishaw Productivity System alignment, a method used to align the probe on a CMM machine.

    • RPS alignment is a process used to ensure the probe on a CMM machine is accurately aligned for precise measurements.

    • It involves setting up the probe in a specific orientation relative to the machine's axes.

    • RPS alignment helps improve the accuracy and repeatability of measurements taken by the CMM.

    • It is com...

  • Answered by AI
  • Q5. What are the types of layout?
  • Ans. 

    Types of layout include process layout, product layout, fixed position layout, and combination layout.

    • Process layout: Arranges similar machines or equipment together based on the process they perform.

    • Product layout: Organizes equipment in a line according to the sequence of operations required to manufacture a product.

    • Fixed position layout: Involves keeping the product stationary while workers, materials, and equipment...

  • Answered by AI
Round 2 - Technical 

(4 Questions)

  • Q1. What is MSA? What are its aspects?
  • Ans. 

    MSA stands for Measurement System Analysis. It is a study that evaluates the measurement system's reliability, accuracy, and precision.

    • MSA helps in identifying the sources of variation in the measurement process.

    • It consists of three main aspects: Accuracy, Precision, and Repeatability.

    • Examples of MSA tools include Gage R&R (Repeatability and Reproducibility) studies and Bias studies.

  • Answered by AI
  • Q2. Describe part selection criteria for MSA?
  • Ans. 

    Part selection criteria for MSA involves considering factors like part complexity, material, size, and critical features.

    • Consider part complexity to ensure accurate measurement

    • Select materials that are stable and suitable for measurement equipment

    • Size of the part should be within the measurement range of the equipment

    • Identify critical features that need to be measured accurately

    • Ensure parts are representative of the ov...

  • Answered by AI
  • Q3. What is the gauge acceptance criteria?
  • Ans. 

    Gauge acceptance criteria are the specifications that a part must meet in order to be considered acceptable for use.

    • Gauge acceptance criteria are typically based on the part's dimensions, tolerances, and other relevant specifications.

    • These criteria are established to ensure that parts meet the required quality standards and will function properly in their intended application.

    • For example, a gauge acceptance criteria fo...

  • Answered by AI
  • Q4. What major failure you have had face into your career?
  • Ans. 

    I once failed to catch a critical error in a CMM program, resulting in scrapped parts and production delays.

    • Misinterpreted a dimension on a drawing, leading to incorrect programming

    • Failed to thoroughly verify program before running it on the machine

    • Lack of communication with the engineering team about program changes

    • Implemented corrective actions to prevent similar mistakes in the future

  • Answered by AI
Round 3 - HR 

(3 Questions)

  • Q1. Why are you looking for job change?
  • Ans. 

    Seeking new challenges and growth opportunities in a dynamic work environment.

    • Looking for opportunities to expand my skills and knowledge in CMM programming

    • Interested in working with new technologies and tools

    • Seeking a more collaborative and innovative work culture

    • Want to take on more responsibilities and contribute to a larger team

  • Answered by AI
  • Q2. Why are you looking for minda? I
  • Ans. 

    I am looking for a new opportunity at Minda to further develop my skills in CMM programming.

    • Seeking a new challenge and growth opportunities

    • Interested in working with advanced technology at Minda

    • Excited about the company's reputation in the industry

  • Answered by AI
  • Q3. Tell me about yourself?
  • Ans. 

    I am a skilled CMM Programmer with experience in programming and operating Coordinate Measuring Machines.

    • Experienced in writing and editing CMM programs

    • Proficient in operating CMM machines to measure parts accurately

    • Knowledgeable in GD&T and blueprint reading

    • Familiar with various measurement tools and techniques

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Hr system is slow even worst HR system I have seen ever in my whole career. But the company is good.

Interview questions from similar companies

I applied via Walk-in and was interviewed in May 2022. There were 4 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(3 Questions)

  • Q1. Production related questions
  • Q2. Working flow rated questions
  • Q3. Any other factory related
Round 3 - HR 

(1 Question)

  • Q1. Salary related questions
Round 4 - Group Discussion 
Pro Tip by AmbitionBox:
Don’t treat group discussions as an argument. Group discussion is about reaching a meaningful conclusion.
View all tips

Interview Preparation Tips

Interview preparation tips for other job seekers - Need good job for my skills and production related.

I applied via Naukri.com and was interviewed in Jul 2021. There were 3 interview rounds.

Interview Questionnaire 

1 Question

  • Q1. Technical questions only CNC machine

Interview Preparation Tips

Interview preparation tips for other job seekers - Technical knowledge Improvement

I applied via Naukri.com and was interviewed in Oct 2020. There were 3 interview rounds.

Interview Questionnaire 

3 Questions

  • Q1. Previous company job profile.
  • Q2. Plc related questions
  • Q3. Family background

I applied via Walk-in

Round 1 - Technical 

(1 Question)

  • Q1. What is your current role and responsibility
Round 2 - One-on-one 

(1 Question)

  • Q1. Why you are leaving your current job

Interview Preparation Tips

Interview preparation tips for other job seekers - Please ready with all technical answer with weel study

I applied via Recruitment Consultant and was interviewed before Oct 2020. There were 3 interview rounds.

Interview Questionnaire 

5 Questions

  • Q1. Which vehicle license you have?
  • Ans. 

    I have a valid driver's license for both cars and motorcycles.

    • I have a Class C license for cars

    • I also have a Class M license for motorcycles

    • I have a clean driving record with no accidents or violations

  • Answered by AI
  • Q2. What is CBS & ABS
  • Q3. Which segment of bike you ride
  • Ans. 

    I ride a road bike for commuting and a mountain bike for leisure.

    • I prefer road bikes for their speed and efficiency on paved roads.

    • I enjoy mountain biking for the challenge and adventure of off-road trails.

    • I also have experience with hybrid bikes for their versatility.

    • I prioritize safety and always wear a helmet and follow traffic laws.

    • I have participated in charity rides and group rides for fun and community.

  • Answered by AI
  • Q4. How you do the vehicle testing
  • Ans. 

    Vehicle testing involves various methods to ensure safety, performance, and compliance with regulations.

    • Testing can include physical tests such as crash tests, durability tests, and performance tests.

    • Simulation and modeling can also be used to test vehicle components and systems.

    • Testing must comply with regulations set by organizations such as the National Highway Traffic Safety Administration (NHTSA) and the European

  • Answered by AI
  • Q5. Which type of Homologation testing you do?
  • Ans. 

    We conduct various types of homologation testing depending on the product and its intended market.

    • We conduct safety testing to ensure compliance with local regulations.

    • We perform emissions testing to ensure compliance with environmental regulations.

    • We conduct performance testing to ensure the product meets the required standards.

    • We also conduct durability testing to ensure the product can withstand the expected wear an...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - That question were ask me for vehicle testing engineer & for test rider position
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
More than 8 weeks
Result
Selected Selected

I applied via Recruitment Consulltant and was interviewed before Oct 2022. There were 4 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Double-check your resume for any spelling mistakes. The recruiter may consider spelling mistakes as careless behavior or poor communication skills.
View all tips
Round 2 - One-on-one 

(3 Questions)

  • Q1. Related to old experience with explanations.
  • Q2. Why are you join this group.
  • Q3. How to improve for skill manpower
  • Ans. 

    To improve skill manpower, focus on training programs, mentorship, career development, and recruitment strategies.

    • Implement regular training programs to enhance skills and knowledge

    • Provide mentorship opportunities for junior employees to learn from experienced professionals

    • Offer career development paths and opportunities for advancement within the organization

    • Revise recruitment strategies to attract top talent with the

  • Answered by AI
Round 3 - Technical 

(4 Questions)

  • Q1. OEE calculation
  • Q2. TPM with explanation
  • Ans. 

    TPM stands for Total Productive Maintenance, a proactive approach to maintenance that aims to maximize equipment effectiveness.

    • TPM focuses on preventing equipment breakdowns through regular maintenance and employee involvement.

    • It involves setting up autonomous maintenance teams, conducting planned maintenance activities, and improving overall equipment efficiency.

    • TPM also emphasizes training employees to take ownership...

  • Answered by AI
  • Q3. 7 QC Tools Poke yoke
  • Q4. Kaizen done last group
Round 4 - HR 

(2 Questions)

  • Q1. Salary Expectations
  • Q2. How to join this group
Interview experience
3
Average
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(2 Questions)

  • Q1. About HIL testing
  • Q2. About vector tools

Interview Preparation Tips

Interview preparation tips for other job seekers - Prepare about CAN

I applied via Naukri.com and was interviewed before Jun 2021. There were 4 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(1 Question)

  • Q1. Technical questions related to your project .
Round 3 - Technical 

(1 Question)

  • Q1. Question regarding your task & management skills also
Round 4 - HR 

(1 Question)

  • Q1. Location related question

Interview Preparation Tips

Interview preparation tips for other job seekers - Na

I applied via Walk-in and was interviewed before Feb 2021. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(2 Questions)

  • Q1. Depends on experience
  • Q2. Related to systematic approach
  • Ans. Problem solving tools, OEE, FPY, Root cause analysis. 14Q, 5S
  • Answered Anonymously

Interview Preparation Tips

Interview preparation tips for other job seekers - Never join Bosch chakan if want to have growing future In career and work life balance.

UNO Minda Interview FAQs

How many rounds are there in UNO Minda CMM Programmer interview?
UNO Minda interview process usually has 3 rounds. The most common rounds in the UNO Minda interview process are Technical and HR.
What are the top questions asked in UNO Minda CMM Programmer interview?

Some of the top questions asked at the UNO Minda CMM Programmer interview -

  1. Difference between surface profile and line profil...read more
  2. How to find cordinates of pcd circle...read more
  3. What is the gauge acceptance criter...read more

Tell us how to improve this page.

UNO Minda CMM Programmer Interview Process

based on 1 interview

Interview experience

4
  
Good
View more

Interview Questions from Similar Companies

Bosch Interview Questions
4.2
 • 334 Interviews
MRF Tyres Interview Questions
3.7
 • 297 Interviews
Exide Industries Interview Questions
3.5
 • 167 Interviews
Ceat Tyres Interview Questions
4.0
 • 161 Interviews
Yazaki Interview Questions
3.8
 • 134 Interviews
Apollo Tyres Interview Questions
4.0
 • 130 Interviews
Hitachi Astemo Interview Questions
4.1
 • 103 Interviews
Aptiv Interview Questions
3.5
 • 94 Interviews
View all
Senior Executive
558 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Assistant Manager
536 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Deputy Manager
350 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Senior Engineer
243 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Associate
227 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Explore more salaries
Compare UNO Minda with

Bharat Forge

3.9
Compare

Samvardhana Motherson Group

3.7
Compare

Exide Industries

3.5
Compare

Amara Raja Energy & Mobility

4.1
Compare
Did you find this page helpful?
Yes No
write
Share an Interview