i
UNO Minda
Filter interviews by
I applied via Company Website and was interviewed in Dec 2021. There were 3 interview rounds.
I applied via Company Website and was interviewed in Jan 2022. There was 1 interview round.
Top trending discussions
I applied via Walk-in and was interviewed before Feb 2021. There were 2 interview rounds.
posted on 1 Jun 2020
I applied via Naukri.com and was interviewed in May 2020. There were 4 interview rounds.
Die casting and machining defects are common in manufacturing processes.
Die casting defects include porosity, shrinkage, cold shuts, and flash.
Machining defects include burrs, chatter marks, and tool marks.
Die casting defects can be caused by improper temperature, pressure, or metal flow.
Machining defects can be caused by dull tools, improper speeds and feeds, or poor fixturing.
Defects can lead to part failure, reduced
Filling and high speed ratio formula is used to calculate the filling time of a container with a specific volume of liquid at a given flow rate.
Filling and high speed ratio formula is V/Q
V is the volume of the container and Q is the flow rate of the liquid
The formula is used to determine the time it takes to fill a container with a specific volume of liquid at a given flow rate
The higher the flow rate, the faster the c
posted on 19 Jan 2021
I appeared for an interview in Jul 2020.
I have achieved several milestones throughout my career as a Senior Engineer.
Successfully led a team of engineers to develop and implement a new software system, resulting in a 20% increase in efficiency.
Received recognition for designing and implementing a cost-effective solution that reduced production downtime by 30%.
Contributed to the development of a groundbreaking technology that revolutionized the industry, lead...
posted on 26 Nov 2022
Vocabulary and about your self in the aptitude test
Designed and developed a solar-powered irrigation system for small-scale farmers.
Researched and analyzed the irrigation needs of small-scale farmers
Designed a solar-powered irrigation system using Arduino and sensors
Developed a prototype and tested it in a small-scale farm
Optimized the system for efficiency and cost-effectiveness
Presented the project at a national-level technical symposium
Designed and developed a smart irrigation system using IoT technology.
Researched and identified the requirements for an efficient irrigation system
Developed a prototype using Arduino and sensors to measure soil moisture and temperature
Integrated the system with a mobile application to remotely control and monitor the irrigation process
Conducted testing and optimization to improve the system's performance
I applied via Referral and was interviewed before Oct 2021. There were 3 interview rounds.
Siemens plc models include S7-1200, S7-1500, S7-300, S7-400, and LOGO!
S7-1200
S7-1500
S7-300
S7-400
LOGO!
SPC stands for Statistical Process Control, a method used to monitor and control processes to ensure they are operating efficiently and within specifications.
SPC involves collecting and analyzing data to identify variations in a process
It helps in detecting and correcting issues before they result in defects
Common tools used in SPC include control charts, histograms, and Pareto charts
To configure a dp dp coupler, set the parameters for communication protocol, baud rate, address, and data format.
Set the communication protocol to match the devices being connected.
Configure the baud rate to ensure proper data transmission speed.
Assign a unique address to the dp dp coupler for identification.
Choose the appropriate data format for the connected devices.
Test the configuration to ensure proper communicati
based on 1 interview
Interview experience
based on 2 reviews
Rating in categories
Assistant Manager
551
salaries
| ₹5 L/yr - ₹15.5 L/yr |
Senior Executive
539
salaries
| ₹2.6 L/yr - ₹8.6 L/yr |
Deputy Manager
364
salaries
| ₹6.8 L/yr - ₹18.9 L/yr |
Senior Engineer
250
salaries
| ₹3.6 L/yr - ₹9.7 L/yr |
Associate
231
salaries
| ₹1.3 L/yr - ₹4.4 L/yr |
Bosch
Samvardhana Motherson Group
MRF Tyres
Ceat Tyres