i
Ultra Laboratories
Filter interviews by
I can provide 20% more output than normal output.
I have a track record of consistently exceeding targets by 20%
I have implemented process improvements that have resulted in increased productivity
I am always looking for ways to optimize resources and improve efficiency
I can provide specific examples of times when I have exceeded expectations
I can produce a variety of new products based on market research, customer needs, and available resources.
The number of new products I can produce depends on various factors such as budget, time, and team size.
I can work with the R&D team to come up with innovative ideas for new products.
I can conduct market research to identify gaps in the market and develop products to fill those gaps.
I can also collaborate with cust...
The cost savings from buying products from China and other markets depend on various factors such as product type, quantity, shipping costs, and tariffs.
Cost savings depend on the product type and quantity being purchased.
Shipping costs and tariffs can also impact the overall cost savings.
For example, purchasing electronics from China may result in significant cost savings due to lower labor costs, but shipping costs a...
Yes, SEZ companies are exempted from Labour laws.
SEZ companies, or Special Economic Zone companies, enjoy certain exemptions from Labour laws.
These exemptions include provisions related to working hours, minimum wages, and employee benefits.
SEZ companies are allowed to have flexible working hours and can negotiate wages directly with employees.
They are also exempted from certain regulations regarding employee welfare a...
No product license should be applied without conducting stability studies of the products. If such a license is obtained by fraud, it can be recalled and cancelled by the drugs control department.
To appoint contract workers for piece work job in a Pharma company, follow these steps:
Identify the specific job requirements and skills needed for the piece work job
Advertise the job opening through various channels such as online job portals, local newspapers, and industry-specific forums
Screen the applicants based on their qualifications, experience, and ability to perform the piece work job efficiently
Conduct inter...
To appoint Government Apprentice Trainees over the upper limit prescribed by the Central Government and take benefit from them, one can explore exemptions or special provisions provided by the Central Government.
Research and identify any exemptions or special provisions provided by the Central Government for appointing trainees over the upper limit.
Consult with relevant government departments or agencies to understand ...
Lay-offs without government permission for companies with over 100 employees.
Consult legal experts to understand the legal requirements and implications of lay-offs.
Ensure compliance with labor laws and regulations.
Consider alternative measures like voluntary retirement schemes or reduced working hours.
Communicate openly and transparently with employees about the reasons for lay-offs.
Provide support and assistance to a...
It is a criminal offence , if anyone sends single dose injectables without primary labeling on the container. No one is exempted in India to perform this illegal activity
Top trending discussions
I applied via Referral and was interviewed before Feb 2019. There were 3 interview rounds.
Cavability Index is a measure of the ease with which a rock can be excavated using mechanical means.
It is used in mining to determine the suitability of a rock for excavation.
It is calculated by measuring the uniaxial compressive strength and tensile strength of the rock.
The higher the Cavability Index, the easier it is to excavate the rock.
It is an important factor in determining the cost and feasibility of mining ope
I applied via Approached by Company and was interviewed before Feb 2021. There were 2 interview rounds.
I will handle the staff by fostering open communication, providing support and guidance, setting clear expectations, and recognizing and rewarding their hard work.
Foster open communication by holding regular team meetings and one-on-one check-ins
Provide support and guidance by offering training opportunities and mentorship programs
Set clear expectations by outlining goals and objectives for each team member
Recognize an...
ABC analysis of materials is a method used to categorize inventory items based on their value and importance.
ABC analysis classifies items into three categories: A, B, and C.
Category A includes high-value items that require close monitoring and control.
Category B includes moderately valuable items that need regular monitoring.
Category C includes low-value items that require minimal attention.
The analysis helps in prior...
I would assess the critical material, prioritize actions, involve relevant stakeholders, and implement a solution with clear communication.
Assess the severity and impact of the critical material
Prioritize actions based on urgency and importance
Involve relevant stakeholders such as production, quality control, and suppliers
Implement a solution with clear communication and follow-up
I will prioritize excellent customer service by actively listening to their needs, resolving issues promptly, and going above and beyond to exceed their expectations.
Actively listen to customers' needs and concerns
Resolve issues promptly and efficiently
Provide personalized service to exceed customer expectations
Train and empower staff to deliver exceptional customer service
Seek feedback and continuously improve custome
I applied via Referral and was interviewed before Dec 2019. There was 1 interview round.
Emotional quotient cannot be tested through test cases.
Emotional quotient is a measure of emotional intelligence, which cannot be quantified through test cases.
EQ is assessed through observation, self-reflection, and feedback from others.
Some common indicators of high EQ include empathy, self-awareness, and effective communication.
Instead of test cases, EQ can be evaluated through behavioral interviews, personality ass
posted on 7 Nov 2019
I applied via Company Website and was interviewed before Apr 2020. There were 3 interview rounds.
Layout of combined cycle power plant with different structures and components.
Combined cycle power plant consists of gas turbine, heat recovery steam generator, and steam turbine.
Gas turbine generates electricity by burning natural gas or oil.
Heat recovery steam generator recovers waste heat from gas turbine exhaust and generates steam.
Steam turbine generates additional electricity using the steam produced by heat reco...
Designing machine foundation for gas turbine involves several factors and types of foundations.
Factors to consider include soil type, turbine size and weight, seismic activity, and environmental conditions.
Types of foundations include block, pile, and raft foundations.
Block foundations are suitable for smaller turbines on stable soil.
Pile foundations are used for larger turbines or unstable soil.
Raft foundations are us...
Ductile detailing for beam, column, and foundation involves following IS codes and ensuring proper reinforcement placement.
For beams, IS 13920 is followed and reinforcement is placed at the bottom of the beam.
For columns, IS 13920 and IS 456 are followed and reinforcement is placed in a spiral pattern.
For foundations, IS 13920 and IS 2911 are followed and reinforcement is placed in a specific pattern based on the type ...
Pile foundations are used to transfer loads from structures to soil. Different types include driven piles, bored piles, and screw piles.
Driven piles are installed by hammering or vibrating them into the ground.
Bored piles are created by drilling a hole and then filling it with concrete and steel reinforcement.
Screw piles are twisted into the ground using a hydraulic motor.
Design considerations include soil type, load c...
Shear walls are designed to resist lateral forces. Detailing includes reinforcement placement and anchorage.
Design shear walls based on the building code requirements and structural analysis.
Select appropriate materials and thickness for the shear wall.
Detail the reinforcement placement and anchorage to ensure proper load transfer.
Provide adequate boundary elements and openings for ducts and pipes.
Consider seismic and ...
I have experience with various software for structural analysis.
STAAD.Pro
SAP2000
ETABS
ANSYS
AutoCAD Structural Detailing
To model raft foundation or shear wall in finite element method, one needs to follow certain steps.
First, create a 3D model of the foundation or wall using a CAD software.
Next, import the model into a finite element analysis software.
Define the material properties and boundary conditions.
Mesh the model to create finite elements.
Solve the model to obtain the stresses and displacements.
Finally, analyze the results and ma...
Water retaining structures are designed as per IS code and crack width is limited to ensure safety.
Design of water retaining structures involves determining the loads, selecting materials, and ensuring stability.
IS 3370 is the code used for design of water retaining structures in India.
The crack width for water retaining structures is limited to 0.2 mm to ensure safety and prevent leakage.
Various types of water retaini...
Yes, I have worked with both American and British codes.
I have experience working with the International Building Code (IBC) which is based on American codes.
I have also worked with British Standards (BS) such as BS 5950 for structural steel design.
I am familiar with the differences between the two codes and can adapt accordingly.
Different load combinations for RCC and Steel structures.
Load combinations for RCC structures include dead load, live load, wind load, earthquake load, and temperature load.
Load combinations for Steel structures include dead load, live load, wind load, earthquake load, temperature load, and snow load.
Load combinations are determined based on the design codes and standards applicable to the project.
The load combinations...
Yes, I have extensive experience in site inspections and creating progress and quality reports.
I have conducted site inspections for various projects in my previous roles.
I am proficient in creating detailed progress and quality reports based on my observations during site inspections.
I have also implemented corrective actions based on the findings of my inspections to ensure project success.
For example, in my previous...
To draw a bending moment and shear force diagram for a portal frame with lateral force and UDL.
Calculate the reactions at the supports
Determine the shear force and bending moment at each section
Plot the shear force and bending moment diagrams
Identify the maximum shear force and bending moment
Consider the sign conventions for shear force and bending moment
Use appropriate software or tools for accurate results
I applied via Walk-in and was interviewed before Aug 2020. There were 5 interview rounds.
I applied via Walk-in and was interviewed in Oct 2020. There were 4 interview rounds.
I applied via Company Website and was interviewed before May 2020. There were 3 interview rounds.
Some of the top questions asked at the Ultra Laboratories General Manager interview -
Executive
12
salaries
| ₹1.8 L/yr - ₹3.5 L/yr |
Executive Quality Assurance
7
salaries
| ₹2 L/yr - ₹2.9 L/yr |
Executive Production
6
salaries
| ₹1.8 L/yr - ₹3.2 L/yr |
Executive Quality Control
6
salaries
| ₹1.5 L/yr - ₹2.7 L/yr |
Assistant Manager Regulatory Affairs
4
salaries
| ₹5.4 L/yr - ₹8.7 L/yr |
Symbiotec Pharmalab
Recipharm Pharmaservices
Abbott Nutrition International
Aspiro Pharma