TVS Autolec Interview Questions and Answers

Q1. What about Lubrication system & its components?
Ans. 
The lubrication system is responsible for reducing friction between moving parts in an engine by providing oil to various components.
• The main components of a lubrication system include the oil pump, oil filter, oil pan, and oil passages.

• The oil pump is responsible for circulating oil through the engine to lubricate moving parts.

• The oil filter helps remove contaminants from the oil to prevent damage to engine components...read more
Answered by AI
Add your answer
Q2. How do you diagnosis when vehicle came from overheating concern?
Ans. 
Diagnosing vehicle overheating concerns involves checking coolant levels, radiator condition, thermostat, and fan operation.
• Check coolant levels to ensure there is enough fluid to regulate engine temperature

• Inspect radiator for leaks or blockages that may be causing overheating

• Test thermostat to see if it is opening and closing properly

• Verify fan operation to ensure it is cooling the engine effectively
Answered by AI
Add your answer
Q3. What process follow for diagnosis any vehicle?
Ans. 
Diagnosing a vehicle involves a systematic process of identifying and troubleshooting issues.
• Start by gathering information from the driver about any symptoms or issues they have noticed

• Perform a visual inspection of the vehicle to look for obvious signs of damage or wear

• Use diagnostic tools such as OBD scanners to read error codes and identify specific issues

• Test drive the vehicle to observe any unusual behavior or no...read more
Answered by AI
Add your answer

Q1. What is ADAS & it's Levels
Ans. 
ADAS stands for Advanced Driver Assistance Systems. It refers to a set of safety features and technologies designed to assist drivers in the driving process.
• ADAS includes features like adaptive cruise control, lane departure warning, automatic emergency braking, and blind spot monitoring.

• There are different levels of ADAS ranging from Level 0 (no automation) to Level 5 (full automation).

• Each level represents the extent...read more
Answered by AI
Add your answer
Q2. What is differential & Transfer case, 4*4?
Ans. 
Differential & Transfer case are components of a 4*4 system in vehicles, allowing power to be distributed between front and rear wheels for better traction.
• Differential is a gear system that allows wheels to rotate at different speeds, necessary for turning

• Transfer case is a gearbox that distributes power from the transmission to both front and rear axles in a 4*4 vehicle

• 4*4 system provides better traction and stab...read more
Answered by AI
Add your answer
Q3. Aware about Connected car feathers?
Ans. 
Connected car features refer to technology that allows vehicles to communicate with each other and with external systems for improved safety, efficiency, and convenience.
• Real-time traffic updates

• Remote vehicle diagnostics

• Automatic emergency calling (eCall)

• Vehicle-to-vehicle communication

• Integration with smartphones for navigation and entertainment
Answered by AI
Add your answer
Q4. Types of Transmission use in current & pls explain?
Ans. 
Types of transmission include manual, automatic, CVT, DCT, and AMT.
• Manual transmission requires the driver to manually shift gears using a clutch pedal and gear stick.

• Automatic transmission shifts gears automatically without the need for manual input.

• CVT (Continuously Variable Transmission) uses a belt and pulley system to provide seamless gear shifts.

• DCT (Dual Clutch Transmission) uses two separate clutches for faster...read more
Answered by AI
Add your answer
Q5. What about EV & it's Technology?
Ans. 
EV technology refers to electric vehicles and their associated technologies, such as batteries and charging infrastructure.
• EV technology is rapidly advancing, with improvements in battery technology leading to longer range and faster charging times.

• Charging infrastructure is expanding to support the growing number of EVs on the road, including fast chargers and wireless charging options.

• EVs offer environmental benefits...read more
Answered by AI
Add your answer

Q1. Explain what do you understand about Automobile?
Ans. 
Automobile refers to a vehicle designed for transportation, typically with four wheels and powered by an internal combustion engine.
• Automobiles are commonly used for personal transportation, commuting, and delivery of goods.

• They come in various types such as cars, trucks, buses, and motorcycles.

• Automobiles have evolved over time with advancements in technology, safety features, and fuel efficiency.

• Examples of automobil...read more
Answered by AI
Add your answer
Q2. Explain when press the clutch pedal in manual transmission?
Ans. 
Pressing the clutch pedal in a manual transmission disengages the engine from the wheels, allowing for gear changes.
• Press the clutch pedal when shifting gears

• Press the clutch pedal when coming to a stop

• Press the clutch pedal when starting the vehicle

• Press the clutch pedal when reversing

• Press the clutch pedal when the vehicle is stationary
Answered by AI
Add your answer
Q3. Explain auto transmission solenoids ?
Ans. 
Auto transmission solenoids are electrical components that control the flow of transmission fluid to engage different gears in an automatic transmission system.
• Auto transmission solenoids are electromechanical valves that open and close to regulate the flow of transmission fluid.

• They are controlled by the vehicle's computer system to engage different gears based on driving conditions.

• Common types of auto transmission s...read more
Answered by AI
Add your answer

Q1. Tell me about yourself
Ans. 
Experienced sales professional with a proven track record in driving revenue growth and building strong client relationships.
• Over 5 years of experience in sales, with a focus on territory management

• Successfully exceeded sales targets by 20% in previous role

• Skilled in developing and implementing sales strategies to penetrate new markets

• Strong communication and negotiation skills

• Bachelor's degree in Business Administrati
Answered by AI
Add your answer
Q2. Your notice period , your work profile etc
Add your answer

2 rounds of apti, 1 situation based questions, other normal maths, reasoning apti test around 1.3 hours long

Q1. Explain your profile , what dod you do ?
Ans. 
I am a seasoned sales professional with experience in managing territories and driving revenue growth.
• Managed sales territories to achieve revenue targets

• Developed and implemented sales strategies to increase market share

• Built and maintained relationships with key clients and stakeholders

• Tracked sales performance and analyzed data to identify opportunities for growth
Answered by AI
Add your answer
Q2. Why should we hire you explain in 1 minute
Ans. 
You should hire me because of my proven track record in exceeding sales targets, strong leadership skills, and ability to build and maintain relationships with clients.
• I have consistently exceeded sales targets in my previous roles by implementing strategic sales plans and effectively managing client relationships.

• I possess strong leadership skills, which have enabled me to successfully lead and motivate sales teams to...read more
Answered by AI
Add your answer
Q3. How have you contributed to profitability of distributors
Ans. 
I have contributed to distributor profitability by implementing targeted sales strategies, providing training and support, and analyzing market trends.
• Implemented targeted sales strategies to increase distributor sales and revenue

• Provided training and support to help distributors improve their sales techniques and customer relationships

• Analyzed market trends to identify new opportunities for distributors to expand thei
Answered by AI
Add your answer

Q1. Introduce yourself , then questions related to my previous job, explain the profile, etc
Add your answer
Q2. Why are you leaving your current organisation
Ans. 
Seeking new challenges and growth opportunities
• Looking for a new challenge to further develop my skills

• Seeking opportunities for career advancement

• Interested in exploring new industries or markets

• Current organization lacks growth prospects or career development opportunities
Answered by AI
Add your answer
Q3. Questions related to mechanical engg and cars, then general GK based questions related to pollution norms, industry stats, MSIL market share etc
Add your answer

Q1. Abstract vs Interface
Add your answer
Q2. When to use interface and abstract
Add your answer
Q3. Method overloading and Method overriding
Add your answer
Q4. Difference between val and var
Add your answer
Q5. Difference between const and val
Add your answer
Q6. Project related questions
Add your answer
Q7. Coding question: Shift all zeroes to one side.
Add your answer
Q8. Asked about Viewmodel and how does it handle configuration changes.
Add your answer
Q9. What are the advantages of Kotlin over Java?
Add your answer

Q1. I. don't have time
Add your answer
Q2. What do u say💬
Add your answer
Q3. What you names. And company. Job
Add your answer
Q4. I like your questions about the new season
Add your answer
Q5. What you company name and company
Add your answer

Q1. What is PPAP. And their documents
Ans. 
PPAP stands for Production Part Approval Process. It is a standardized process in the automotive industry to ensure suppliers meet quality standards.
• PPAP is a set of documents and requirements used to demonstrate that a supplier can consistently produce parts meeting customer specifications.

• Documents in PPAP include: Part Submission Warrant (PSW), Design Records, Engineering Change Documents, Process Flow Diagram, Cont...read more
Answered by AI
Add your answer
Q2. What is 7QC tools. And about RAC and parato diagram
Add your answer
Q3. What is 8D and how follows their steps.
Ans. 
8D is a problem-solving methodology used to identify, correct, and prevent recurring problems in manufacturing processes.
• Define the problem

• Form a team

• Implement immediate containment actions

• Identify root causes

• Develop and verify permanent corrective actions

• Implement corrective actions

• Prevent recurrence

• Recognize team efforts
Answered by AI
Add your answer
Q4. What is Incoming quality.and how check and verify.
Ans. 
Incoming quality refers to the quality of materials or components received from suppliers before they are used in production. It involves checking and verifying the quality of incoming materials to ensure they meet the required standards.
• Incoming quality is the assessment of materials or components received from suppliers to ensure they meet quality standards

• Methods for checking incoming quality include visual inspecti...read more
Answered by AI
Add your answer
Q5. What is sampling plan
Ans. 
A sampling plan is a detailed outline of the procedures and techniques to be used for selecting a sample from a population for inspection or testing.
• Defines the method for selecting a representative sample from a larger population

• Specifies the sample size, sampling method, acceptance criteria, and inspection procedures

• Helps ensure that the sample is statistically valid and representative of the population

• Commonly used ...read more
Answered by AI
Add your answer
Q6. How many types of micrometre and their usese.
Ans. 
There are two main types of micrometers - outside micrometer and inside micrometer, used for measuring external and internal dimensions respectively.
• Outside micrometer is used for measuring the external dimensions of an object, such as diameter, thickness, or length.

• Inside micrometer is used for measuring the internal dimensions of an object, such as the inside diameter of a hole or bore.

• Examples include digital microm...read more
Answered by AI
Add your answer
Q7. How many types of gauge used in your previous company.
Ans. 
There were three types of gauges used in my previous company: measuring gauges, inspection gauges, and attribute gauges.
• Measuring gauges - used to measure dimensions accurately (e.g. calipers, micrometers)

• Inspection gauges - used to check the quality of a part (e.g. go/no-go gauges)

• Attribute gauges - used to determine if a part meets certain criteria (e.g. plug gauges)
Answered by AI
Add your answer
Q8. What is SPC. And how to calculate it.
Ans. 
SPC stands for Statistical Process Control. It is a method used to monitor and control processes to ensure they are stable and in control.
• SPC involves collecting and analyzing data to identify variations in a process

• Calculating SPC involves using control charts such as X-bar and R charts

• SPC helps in identifying trends, shifts, and outliers in the process data

• SPC is used to make data-driven decisions to improve process
Answered by AI
Add your answer
Q9. About QMS principal.
Add your answer
Q10. Who all the IATF clause.
Ans. 
IATF 16949 is a standard for automotive quality management systems, consisting of various clauses.
• IATF 16949 consists of 10 clauses covering different aspects of quality management in the automotive industry.

• Some of the key clauses include: Clause 4 - Context of the organization, Clause 5 - Leadership, Clause 6 - Planning, Clause 7 - Support, Clause 8 - Operation, Clause 9 - Performance evaluation, and Clause 10 - Impr...read more
Answered by AI
Add your answer

Q1. About family background
Add your answer
Q2. About previous company role and designation.
Add your answer
Q3. How expected salary.
Ans. 
I am looking for a competitive salary based on my experience and skills.
• I am open to discussing salary based on the responsibilities and expectations of the role.

• I have a range in mind based on industry standards and my level of experience.

• I am looking for a salary that reflects my contributions to the company and aligns with my career goals.
Answered by AI
Add your answer

Q1. What are the PPAP documents ?
Ans. 
PPAP documents are a set of documents used in the automotive industry to ensure suppliers meet quality standards.
• PPAP documents include items such as design records, engineering change documents, process flow diagrams, control plans, measurement system analysis, and more.

• They are used to demonstrate that the supplier has understood the customer's requirements and has processes in place to consistently meet those requir...read more
Answered by AI
Add your answer
Q2. What level you know PPAP?
Ans. 
PPAP stands for Production Part Approval Process and is a standardized process in the automotive industry to ensure suppliers meet quality requirements.
• PPAP is a standardized process in the automotive industry to ensure suppliers meet quality requirements

• It involves submitting documentation such as design records, process flow diagrams, and control plans

• PPAP typically consists of 18 elements including dimensional resul...read more
Answered by AI
Add your answer

Tell me what is your strength about quality assurance?

Q1. Problem solving procedure for process.
Ans. 
The problem-solving procedure for a process involves identifying the issue, analyzing the root cause, developing solutions, implementing the best solution, and monitoring the results.
• Identify the problem or issue in the process

• Analyze the root cause of the problem

• Develop potential solutions to address the root cause

• Implement the best solution

• Monitor and evaluate the results to ensure effectiveness
Answered by AI
Add your answer

Q1. Work from official
Add your answer
Q2. Experience eicher tractor bhopal
Add your answer
Q3. Solid work to High cost
Add your answer

Q1. Solid work and technical engineer
Add your answer

Q1. Job kha pa ha
Add your answer
Q2. Job kha pa ha
Add your answer

Q1. Machine and tachanical
Add your answer
Q2. Machine and tachanical
Add your answer

Q1. Engine and gear
Add your answer
Q2. Engi
Add your answer