AmbitionBox
Interview Questions
- Reviews
- Salaries
- Interview Questions
- About Company
- Benefits
- Jobs
- Office Photos
- Community
Add office photos
Filter interviews by
Catalynt Quality Engineer Interview Questions and Answers
Catalynt Quality Engineer Interview Experiences
1 interview found
Madhu latha
(1 Question)
- Q1. Selenium test scripts
Interview Preparation Tips
Top trending discussions
Interview questions from similar companies
Sujeet Salunke
Selected
I applied via Naukri.com and was interviewed before Apr 2023. There was 1 interview round.
(4 Questions)
- Q1. What are 7 QC Tools
- Ans.
The 7 QC Tools are a set of basic tools used for quality control and problem-solving in manufacturing and other industries.
Check sheet: Used to collect and analyze data in a systematic manner.
Histogram: A visual representation of data distribution.
Pareto chart: Helps identify the most significant factors contributing to a problem.
Cause-and-effect diagram (Fishbone diagram): Used to identify and analyze potential causes...
- Q2. How to handle customer complaint
- Ans.
Handle customer complaints by listening, empathizing, investigating, resolving, and following up.
Listen to the customer's complaint without interrupting
Empathize with the customer's situation and show understanding
Investigate the root cause of the complaint to prevent future occurrences
Resolve the issue promptly and effectively
Follow up with the customer to ensure satisfaction and prevent recurrence
- Q3. What is GD and T
- Ans.
GD&T stands for Geometric Dimensioning and Tolerancing, a system for defining and communicating engineering tolerances.
GD&T is a symbolic language used on engineering drawings to specify the allowable variations in form, size, and orientation of features.
It helps ensure that parts fit together properly and function as intended.
GD&T includes symbols, such as concentricity, flatness, perpendicularity, and position, to co...
- Q4. What are 5 core tools of Quality
- Ans.
The 5 core tools of Quality are essential techniques used in quality management to ensure products and processes meet standards.
1. Process Flowcharts: Used to visually represent the steps in a process.
2. Cause and Effect Diagrams (Fishbone Diagrams): Used to identify and analyze potential causes of a problem.
3. Control Charts: Used to monitor process variation over time.
4. Check Sheets: Used to collect and analyze data...
Interview Preparation Tips
- Quality Assurance
- Quality Control
Skills evaluated in this interview
Selected
I applied via Company Website and was interviewed before Jun 2023. There were 3 interview rounds.
Quality Checking process
(1 Question)
- Q1. Power Plant Related
(1 Question)
- Q1. Personal Details
Assistant Manager Quality Interview Questions & Answers
Crescent Foundry
Rishabh Srivastava
posted on 4 Feb 2023
Selected
I applied via Approached by Company and was interviewed in Jan 2023. There were 3 interview rounds.
(1 Question)
- Q1. 1.Describe yourself 2.Roles and Responsibilities
- Ans. Jst tell my basic details Discuss abot R&R of my previous company
(2 Questions)
- Q1. This was my telephonic technical round Following are some questions - 1.Tell me about ur duties and responsibilities in your previous organization. 2.IATF Clause details 3.Core tool 4.How will you monitor...
- Q2. Plant interview - 1.More deep analysis of clauses 2.Deep details and explaining of Core tool 3.Difference between IATF and ISO 9K? 4. MRM planning 5.Your future goals
Interview Preparation Tips
Executive Quality Assurance Interview Questions & Answers
NLMK India
Anonymous
posted on 27 Feb 2023
Selected
I applied via Campus Placement and was interviewed in Jan 2023. There were 2 interview rounds.
(2 Questions)
- Q1. Tell me about your self, Tell me about your project
- Q2. Tell me about your project
Interview Preparation Tips
- Electrical steel sheet
- Testing apparatus
Selected
I applied via Naukri.com and was interviewed before Apr 2023. There was 1 interview round.
(4 Questions)
- Q1. What are 7 QC Tools
- Ans.
The 7 QC Tools are a set of basic tools used for quality control and problem-solving in manufacturing and other industries.
Check sheet: Used to collect and analyze data in a systematic manner.
Histogram: A visual representation of data distribution.
Pareto chart: Helps identify the most significant factors contributing to a problem.
Cause-and-effect diagram (Fishbone diagram): Used to identify and analyze potential causes...
- Q2. How to handle customer complaint
- Ans.
Handle customer complaints by listening, empathizing, investigating, resolving, and following up.
Listen to the customer's complaint without interrupting
Empathize with the customer's situation and show understanding
Investigate the root cause of the complaint to prevent future occurrences
Resolve the issue promptly and effectively
Follow up with the customer to ensure satisfaction and prevent recurrence
- Q3. What is GD and T
- Ans.
GD&T stands for Geometric Dimensioning and Tolerancing, a system for defining and communicating engineering tolerances.
GD&T is a symbolic language used on engineering drawings to specify the allowable variations in form, size, and orientation of features.
It helps ensure that parts fit together properly and function as intended.
GD&T includes symbols, such as concentricity, flatness, perpendicularity, and position, to co...
- Q4. What are 5 core tools of Quality
- Ans.
The 5 core tools of Quality are essential techniques used in quality management to ensure products and processes meet standards.
1. Process Flowcharts: Used to visually represent the steps in a process.
2. Cause and Effect Diagrams (Fishbone Diagrams): Used to identify and analyze potential causes of a problem.
3. Control Charts: Used to monitor process variation over time.
4. Check Sheets: Used to collect and analyze data...
Interview Preparation Tips
- Quality Assurance
- Quality Control
Skills evaluated in this interview
Selected
I applied via Company Website and was interviewed before Jun 2023. There were 3 interview rounds.
Quality Checking process
(1 Question)
- Q1. Power Plant Related
(1 Question)
- Q1. Personal Details
Quality Inspector Interview Questions & Answers
Crescent Foundry
subhasish sau
posted on 29 Jul 2021
Interview Questionnaire
9 Questions
- Q1. Measure a part as per drawing.
- Ans.
To measure a part as per drawing, use appropriate measuring tools and follow the dimensions and tolerances specified in the drawing.
Identify the part to be measured and its features
Select the appropriate measuring tool (e.g. caliper, micrometer, gauge)
Follow the dimensions and tolerances specified in the drawing
Record the measurement accurately
Compare the measurement to the drawing specifications to ensure it meets req
- Q2. Tell me about yourself?
- Q3. How you come to know about our company?
- Q4. Why you want to left your previous company?
- Q5. What is the difference between 1st angle and 3rd angle projection?
- Ans.
1st angle and 3rd angle projection are two methods of representing a 3D object on a 2D surface.
In 1st angle projection, the object is placed in front of the viewing plane and the views are taken from behind the object.
In 3rd angle projection, the object is placed behind the viewing plane and the views are taken from in front of the object.
1st angle projection is commonly used in Europe and Asia, while 3rd angle project...
- Q6. Draw front view top view and side view of a drawing?
- Ans.
To draw front, top and side view of a drawing, follow these steps.
Start by drawing the front view, which shows the object as it appears from the front.
Next, draw the top view, which shows the object as it appears from above.
Finally, draw the side view, which shows the object as it appears from the side.
Make sure to label each view with the appropriate dimensions and angles.
Use a ruler and protractor to ensure accuracy.
- Q7. Difference between section line and centre line?
- Ans.
Section line is used to show the shape of an object in a section view, while centre line is used to indicate the center of a feature.
Section line is a thick, solid line that is drawn at a right angle to the cutting plane line.
Centre line is a thin, long, dashed line that is used to indicate the center of a feature.
Section line is used to show the shape of an object in a section view, while centre line is used to indica...
- Q8. What you know about counter weight?
- Ans.
Counter weight is a weight used to balance or offset another weight.
Counter weight is used to balance or offset another weight.
It is commonly used in machinery and equipment to prevent imbalance.
Examples include elevator counterweights, crane counterweights, and flywheel counterweights.
Counter weights can be made of various materials such as concrete, steel, or lead.
They are often designed to be easily adjustable or re
- Q9. What are the casting defects?
- Ans.
Casting defects are imperfections that occur during the casting process.
Porosity
Shrinkage
Cracks
Inclusions
Misruns
Cold shuts
Warping
Shifts
Blowholes
Interview Preparation Tips
Don't be oversmart.
Be cool and friendly.
Catalynt Interview FAQs
Tell us how to improve this page.
Interview Questions for Popular Designations
- Quality Inspector Interview Questions
- Senior Quality Engineer Interview Questions
- Quality Controller Interview Questions
- Quality Assurance Interview Questions
- Quality Manager Interview Questions
- Quality Executive Interview Questions
- Quality Assurance Officer Interview Questions
- Executive Quality Assurance Interview Questions
- Show more
Interview Questions from Similar Companies
|
Assistant Manager
3
salaries
|  ₹7.5 L/yr - ₹13.2 L/yr |
Vedanta Aluminium
Thriveni Earthmovers
African Industries
MN Dastur & Company
- Home >
- Interviews >
- Catalynt Interview Questions >
- Catalynt Quality Engineer Interview Questions
