i
Toshniwal Industries
Filter interviews by
Top trending discussions
Open loop does not have feedback mechanism, while closed loop does.
Open loop system does not have a feedback mechanism to adjust the output based on the input.
Closed loop system uses feedback from the output to control the input and maintain desired output.
Open loop systems are simpler and less accurate, while closed loop systems are more complex but more accurate.
Example: A toaster is an open loop system as it does no...
The equation of a PID controller is a control loop feedback mechanism used in industrial control systems.
The equation for a PID controller is: u(t) = Kp*e(t) + Ki*∫e(t)dt + Kd*de(t)/dt
Kp, Ki, and Kd are the proportional, integral, and derivative gains respectively
The proportional term Kp reacts to the current error value
The integral term Ki reacts to the accumulation of past errors
The derivative term Kd reacts to the r
Two common pressure sensors are piezoresistive sensors and capacitive sensors.
Piezoresistive sensors: measure pressure by changes in electrical resistance
Capacitive sensors: measure pressure by changes in capacitance
Open loop does not have feedback mechanism, while closed loop does.
Open loop system does not have a feedback mechanism to adjust the output based on the input.
Closed loop system uses feedback from the output to adjust the input and maintain desired output.
Examples of open loop systems include a toaster or a washing machine with a timer setting.
Examples of closed loop systems include a thermostat controlling room temper
I overcome problems by analyzing the situation, seeking advice, and taking action.
I analyze the situation to identify the root cause of the problem
I seek advice from colleagues or experts in the field
I take action by developing a plan and implementing solutions
I remain flexible and adaptable to adjust my approach as needed
For example, when faced with a project delay, I analyzed the cause, sought advice from my team, an...
PID stands for Proportional-Integral-Derivative. It is a control loop feedback mechanism used in engineering.
PID is used to control physical processes such as temperature, pressure, flow rate, and speed.
It calculates an error value as the difference between a measured process variable and a desired setpoint.
The three components of PID are proportional, integral, and derivative.
Proportional control responds to the curre...
I applied via Recruitment Consulltant
I applied via Referral and was interviewed in Nov 2021. There was 1 interview round.
PID stands for Proportional-Integral-Derivative. It is a control algorithm used in engineering to regulate processes.
PID is a feedback control algorithm that continuously calculates an error value and adjusts the control effort to minimize the error.
It consists of three terms: Proportional, Integral, and Derivative, which are combined to calculate the control output.
The Proportional term responds to the current error, ...
I applied via Recruitment Consulltant and was interviewed before May 2023. There were 2 interview rounds.
based on 1 review
Rating in categories
Assistant Engineer
30
salaries
| ₹1.5 L/yr - ₹3 L/yr |
Project Engineer
11
salaries
| ₹1.9 L/yr - ₹3.2 L/yr |
Purchase Engineer
9
salaries
| ₹2 L/yr - ₹3 L/yr |
Purchase Executive
8
salaries
| ₹1.8 L/yr - ₹3 L/yr |
Product Engineer
7
salaries
| ₹3 L/yr - ₹3.5 L/yr |
Kirloskar Brothers
Thermax Limited
Crompton Greaves Consumer Electricals
BHEL