Filter interviews by
I applied via Walk-in
A buffer is a device that absorbs shock or impact to prevent damage to the elevator or its passengers.
Buffers are typically located at the bottom of the elevator shaft.
They are made of materials such as rubber or steel springs.
Buffers are designed to compress and absorb energy in the event of an elevator overspeed or impact.
They are an important safety feature in elevators.
Examples of buffer types include hydraulic, pn
OH speed refers to the speed at which an elevator's doors open and close.
OH speed stands for Opening and Holding speed.
It is the speed at which the elevator doors open and close.
The OH speed is an important factor in ensuring passenger safety and efficient operation of the elevator.
It is typically measured in feet per minute (fpm) or meters per second (m/s).
The OH speed can vary depending on the type and purpose of the...
Pit depth speed refers to the maximum speed an elevator can travel based on the depth of the pit.
Pit depth speed is determined by the depth of the elevator pit.
The deeper the pit, the slower the elevator must travel to ensure safety.
Pit depth speed is an important factor in elevator installation and maintenance.
For example, a pit depth of 8 feet may require an elevator speed of 200 feet per minute.
Regular inspections a...
Installation process refers to the steps taken to set up and assemble equipment or systems.
The process involves planning and preparation
It includes assembling and connecting components
Testing and troubleshooting are also important steps
Documentation and training may be necessary
Examples include installing elevators, HVAC systems, and security systems
PPE stands for Personal Protective Equipment.
PPE is equipment worn to minimize exposure to hazards that may cause serious workplace injuries or illnesses.
Examples of PPE include safety glasses, gloves, hard hats, respirators, and earplugs.
PPE should be selected based on the specific hazards present in the workplace.
Employers are responsible for providing PPE to their employees and ensuring that it is properly maintaine...
Lock out tag out is a safety procedure used to ensure that dangerous machines are properly shut off and not started up again prior to the completion of maintenance or repair work.
It involves placing a lock on the power source of the machine to prevent it from being turned on
A tag is also placed on the machine to indicate that it is being worked on and should not be operated
Only the person who placed the lock and tag is...
posted on 14 May 2022
I applied via Naukri.com and was interviewed before May 2021. There was 1 interview round.
I applied via Walk-in and was interviewed before Apr 2020. There were 5 interview rounds.
I was interviewed before Sep 2020.
Round duration - 140 minutes
Round difficulty - Medium
Test timing was at 2:00 pm , it was conducted in a college and the environment was good for the test. Camera was a primary part of test, so no suspicious activity.
Given two numbers in the form of two arrays where each element of the array represents a digit, calculate the sum of these two numbers and return this sum as an ar...
Given two numbers represented as arrays, calculate their sum and return the result as an array.
Iterate through the arrays from right to left, adding digits and carrying over if necessary
Handle cases where one array is longer than the other by considering the remaining digits
Ensure the final sum array does not have any leading zeros
Round duration - 20 minutes
Round difficulty - Easy
The round was conducted at around 12 p.m. I was called at the college location and then it was conducted. The interviewer was quite polite and frank.
Round duration - 8 minutes
Round difficulty - Easy
This round was conducted right after finishing and clearing the technical round at the same place and on the same day.
Tip 1 : Practice atleast 2-3 Coding problems daily so your logic building becomes stronger.
Tip 2 : Exercise problems based on OOPS concepts and others too.
Tip 3 : If you can have your own project built, then it's the major point and will act as a plus point.
Tip 1 : Your resume should be in standard form, short and simple will be more effective.
Tip 2 : Whatever you have learned, you need to mention it in your resume as that will be your primary source of selection and having project on your resume is important.
I applied via Recruitment Consultant and was interviewed before Sep 2020. There were 3 interview rounds.
I applied via Naukri.com and was interviewed in Jul 2020. There were 4 interview rounds.
I applied via Job Portal and was interviewed before Apr 2021. There was 1 interview round.
Solid principles are a set of design principles for writing maintainable and scalable code in C#.
Single Responsibility Principle (SRP) - a class should have only one reason to change
Open/Closed Principle (OCP) - a class should be open for extension but closed for modification
Liskov Substitution Principle (LSP) - derived classes should be substitutable for their base classes
Interface Segregation Principle (ISP) - client...
I applied via Campus Placement and was interviewed before May 2020. There were 4 interview rounds.
I applied via Naukri.com and was interviewed before Apr 2020. There were 5 interview rounds.
I applied via Campus Placement and was interviewed before Jan 2020. There were 4 interview rounds.
based on 1 interview
Interview experience
based on 30 reviews
Rating in categories
Senior Executive
6
salaries
| ₹0 L/yr - ₹0 L/yr |
Senior Manager
5
salaries
| ₹0 L/yr - ₹0 L/yr |
Assistant Manager
4
salaries
| ₹0 L/yr - ₹0 L/yr |
Engineer
4
salaries
| ₹0 L/yr - ₹0 L/yr |
Executive
4
salaries
| ₹0 L/yr - ₹0 L/yr |
TCS
Accenture
Wipro
Cognizant