Upload Button Icon Add office photos
Engaged Employer

i

This company page is being actively managed by Thermax Limited Team. If you also belong to the team, you can get access from here

Thermax Limited Verified Tick

Compare button icon Compare button icon Compare

Filter interviews by

Thermax Limited Chemical Engineer Interview Questions and Answers

Updated 11 Nov 2023

Thermax Limited Chemical Engineer Interview Experiences

1 interview found

Chemical Engineer Interview Questions & Answers

user image Thirumoorthi

posted on 11 Nov 2023

Interview experience
1
Bad
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(3 Questions)

  • Q1. What is mean RT in wastewater treatment plant
  • Ans. 

    RT in wastewater treatment plant refers to the retention time, which is the amount of time wastewater remains in a treatment system.

    • RT is a critical parameter in wastewater treatment plants as it determines the efficiency of the treatment process.

    • It is calculated by dividing the volume of the reactor by the flow rate of influent wastewater.

    • A longer retention time allows for more thorough treatment of contaminants in th...

  • Answered by AI
  • Q2. What is meaning of DAF
  • Ans. 

    DAF stands for Dissolved Air Flotation, a water treatment process used to remove suspended solids, oils, and other contaminants.

    • DAF involves the introduction of fine air bubbles into a water stream to float the particles to the surface for removal.

    • It is commonly used in industrial wastewater treatment plants.

    • DAF is effective in removing contaminants such as oils, grease, and suspended solids.

    • The floated particles are t...

  • Answered by AI
  • Q3. How to calculate sludge waste?
  • Ans. 

    Sludge waste can be calculated by determining the volume or weight of sludge produced and multiplying it by the density of the sludge.

    • Calculate the volume or weight of sludge produced

    • Determine the density of the sludge

    • Multiply the volume or weight by the density to get the total sludge waste

  • Answered by AI
Round 3 - HR 

(1 Question)

  • Q1. Salary package asking

Interview questions from similar companies

I applied via Referral and was interviewed before Jun 2020. There were 3 interview rounds.

Interview Questionnaire 

1 Question

  • Q1. Questions on Process,Simulation, CAD

Interview Preparation Tips

Interview preparation tips for other job seekers - Be confident

I applied via Recruitment Consultant and was interviewed in Jul 2021. There were 3 interview rounds.

Interview Questionnaire 

1 Question

  • Q1. CNC programming

Interview Preparation Tips

Interview preparation tips for other job seekers - Be very technical

I applied via Naukri.com and was interviewed before May 2020. There was 1 interview round.

Interview Questionnaire 

1 Question

  • Q1. Write the equation for dynamics and wave spectra equations. I do not remember questions as it is 3 years back.

Interview Preparation Tips

Interview preparation tips for other job seekers - This happened in Technip FMC Hyderabad, India. I hold 10 years experience. Interviewers don not know what to get from the candidates. The panel tried to prove within themselves that can ask difficult questions. The even entered to doctorate level questions which is not valid for performing job. Finally, I conclude that they performed some time-pass session.

I applied via Recruitment Consultant and was interviewed in Mar 2020. There were 4 interview rounds.

Interview Questionnaire 

1 Question

  • Q1. Questions were related to the post John Deere were offering to candidates. For me it was Diagnostics Author position.

Interview Preparation Tips

Interview preparation tips for other job seekers - Always be aware that answer as simple as you can.
If you don't know the answer don't try to attempt simply say that you don't know and assure interviewer that if you ll get a chance you will definitely answer that.

Be optimistic and attentive.

I applied via Recruitment Consultant and was interviewed in Mar 2020. There were 3 interview rounds.

Interview Questionnaire 

2 Questions

  • Q1. Questions will be related to the post which company is offering.
  • Q2. Should be very accurate to all electronics queries

Interview Preparation Tips

Interview preparation tips for other job seekers - Be smart and to the point answers will help.

Senior Engineer Interview Questions & Answers

KONE user image Murali Krishnan

posted on 19 Mar 2025

Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I appeared for an interview before Mar 2024, where I was asked the following questions.

  • Q1. Could you please share your experiences?
  • Ans. 

    Experienced Senior Engineer with a strong background in software development, project management, and team leadership.

    • Led a team of 10 engineers in developing a scalable web application, improving performance by 30%.

    • Implemented Agile methodologies, resulting in a 25% increase in project delivery speed.

    • Designed and optimized database systems, reducing query response time by 40%.

    • Mentored junior engineers, fostering a col...

  • Answered by AI
  • Q2. Why should Kone hire you?
  • Ans. 

    I bring extensive engineering experience, innovative problem-solving skills, and a passion for enhancing urban mobility solutions.

    • Proven track record in designing and implementing advanced elevator systems, improving efficiency by 20%.

    • Strong collaboration skills demonstrated through successful cross-functional projects, leading to a 15% reduction in project timelines.

    • Expertise in utilizing data analytics to optimize ma...

  • Answered by AI

I applied via Naukri.com and was interviewed in Sep 2021. There were 3 interview rounds.

Interview Questionnaire 

2 Questions

  • Q1. About previous experience
  • Q2. Previous experience

Interview Preparation Tips

Interview preparation tips for other job seekers - Good experience no issues

I applied via Recruitment Consultant and was interviewed in Mar 2021. There were 3 interview rounds.

Interview Questionnaire 

4 Questions

  • Q1. How types of welding?
  • Ans. 

    There are several types of welding including MIG, TIG, Stick, and Flux-Cored welding.

    • MIG welding uses a wire electrode and a shielding gas to join two pieces of metal together.

    • TIG welding uses a tungsten electrode and a filler metal to create a strong weld.

    • Stick welding uses a consumable electrode coated in flux to create a strong bond.

    • Flux-Cored welding uses a wire electrode with a flux core to create a protective shi

  • Answered by AI
  • Q2. Difference b/w 1st angle & 3rd angle projection?
  • Ans. 

    1st angle projection is used in Europe & 3rd angle projection is used in North America. They differ in placement of views.

    • 1st angle projection places the object in front of the viewing plane while 3rd angle projection places the object behind the viewing plane.

    • In 1st angle projection, the top view is placed below the front view while in 3rd angle projection, the top view is placed above the front view.

    • 1st angle project...

  • Answered by AI
  • Q3. Why u are leaving your past company
  • Q4. What is meant by six sigma
  • Ans. 

    Six Sigma is a data-driven methodology used to improve business processes by reducing defects and variability.

    • Six Sigma aims to achieve a level of quality where the probability of defects is extremely low.

    • It involves a structured approach to problem-solving using statistical analysis.

    • The methodology uses a set of tools and techniques such as DMAIC (Define, Measure, Analyze, Improve, Control) and statistical process con...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Overall it is good, always concentrate on core welding concepts
Interview experience
3
Average
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Referral and was interviewed in Nov 2023. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - HR 

(1 Question)

  • Q1. What is your highest qualification
  • Ans. 

    My highest qualification is a Master's degree in Electrical Engineering.

    • Master's degree in Electrical Engineering

    • Specialized in power systems

    • Thesis focused on renewable energy integration

    • Completed advanced courses in control systems

    • Published research papers in IEEE conferences

  • Answered by AI
Round 3 - Technical 

(1 Question)

  • Q1. What is your role and responsibilities in the project quality?
  • Ans. 

    As a Senior Engineer, my role in project quality is to ensure that all deliverables meet the required standards and specifications.

    • Developing and implementing quality assurance processes and procedures

    • Conducting regular audits and inspections to identify any quality issues

    • Collaborating with cross-functional teams to address and resolve quality concerns

    • Creating and maintaining quality documentation, including test plans...

  • Answered by AI

Thermax Limited Interview FAQs

How many rounds are there in Thermax Limited Chemical Engineer interview?
Thermax Limited interview process usually has 3 rounds. The most common rounds in the Thermax Limited interview process are Resume Shortlist, Technical and HR.
What are the top questions asked in Thermax Limited Chemical Engineer interview?

Some of the top questions asked at the Thermax Limited Chemical Engineer interview -

  1. What is mean RT in wastewater treatment pl...read more
  2. How to calculate sludge was...read more
  3. What is meaning of ...read more

Tell us how to improve this page.

Thermax Limited Chemical Engineer Interview Process

based on 1 interview

Interview experience

1
  
Bad
View more

Interview Questions from Similar Companies

ABB Interview Questions
4.1
 • 242 Interviews
John Deere Interview Questions
4.1
 • 235 Interviews
Cummins Interview Questions
4.3
 • 233 Interviews
Caterpillar Inc Interview Questions
4.2
 • 178 Interviews
KONE Interview Questions
4.1
 • 105 Interviews
Atlas Copco Interview Questions
4.2
 • 80 Interviews
TechnipFMC Interview Questions
4.0
 • 73 Interviews
TÜV SÜD Interview Questions
3.9
 • 65 Interviews
Hilti Interview Questions
3.4
 • 61 Interviews
View all
Thermax Limited Chemical Engineer Salary
based on 5 salaries
₹2.8 L/yr - ₹3.2 L/yr
42% less than the average Chemical Engineer Salary in India
View more details

Thermax Limited Chemical Engineer Reviews and Ratings

based on 4 reviews

2.9/5

Rating in categories

5.0

Skill development

5.0

Work-life balance

4.0

Salary

5.0

Job security

5.0

Company culture

4.0

Promotions

5.0

Work satisfaction

Explore 4 Reviews and Ratings
Shift Incharge
309 salaries
unlock blur

₹2.6 L/yr - ₹8.9 L/yr

Assistant Manager
264 salaries
unlock blur

₹5.8 L/yr - ₹16 L/yr

Electrical Engineer
233 salaries
unlock blur

₹2.4 L/yr - ₹7.2 L/yr

Senior Executive
211 salaries
unlock blur

₹4 L/yr - ₹11 L/yr

Control Room Engineer
195 salaries
unlock blur

₹2.5 L/yr - ₹7 L/yr

Explore more salaries
Compare Thermax Limited with

John Deere

4.1
Compare

Cummins

4.3
Compare

ABB

4.1
Compare

KONE

4.1
Compare
Did you find this page helpful?
Yes No
write
Share an Interview