Upload Button Icon Add office photos

Filter interviews by

Texspin Bearings Quality Engineer Interview Questions and Answers for Experienced

Updated 27 Oct 2023

Texspin Bearings Quality Engineer Interview Experiences for Experienced

1 interview found

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Aptitude Test 

Taken apptitude teat for general question like mcq type

Round 3 - Technical 

(1 Question)

  • Q1. Fmea,ppap,supplier rating

Interview questions from similar companies

Interview experience
2
Poor
Difficulty level
Easy
Process Duration
2-4 weeks
Result
Selected Selected

I applied via Naukri.com and was interviewed in Apr 2023. There were 3 interview rounds.

Round 1 - HR 

(2 Questions)

  • Q1. Tell me more about yourself
  • Ans. 

    I am a Quality Engineer with experience in ensuring product quality and implementing quality control processes.

    • Experienced in conducting quality audits and inspections

    • Proficient in using quality tools and techniques such as Six Sigma and Lean

    • Skilled in analyzing data and identifying areas for improvement

    • Strong knowledge of quality standards and regulations

    • Effective communicator and collaborator in cross-functional team

  • Answered by AI
  • Q2. What have you done
  • Ans. 

    As a Quality Engineer, I have implemented various quality control measures and conducted audits to ensure product compliance.

    • Implemented quality control processes to monitor and improve product quality

    • Conducted audits to identify non-conformities and implement corrective actions

    • Collaborated with cross-functional teams to develop and implement quality standards

    • Performed root cause analysis and implemented preventive mea...

  • Answered by AI
Round 2 - Technical 

(1 Question)

  • Q1. Least count of micrometre
  • Ans. 

    The least count of a micrometer is the smallest measurement that can be read on the scale.

    • The least count of a micrometer is determined by the number of divisions on the scale and the pitch of the screw.

    • For example, a micrometer with 50 divisions on the scale and a pitch of 0.5 mm would have a least count of 0.01 mm.

    • The least count is important for accurate measurements and should be taken into consideration when using

  • Answered by AI
Round 3 - Technical 

(1 Question)

  • Q1. What is Quality control function
  • Ans. 

    Quality control function involves monitoring and testing products to ensure they meet the required standards.

    • Quality control function involves inspecting products to ensure they meet the required specifications

    • It involves testing products to ensure they function as intended

    • It involves monitoring the production process to identify and correct any defects

    • Examples include checking the weight and dimensions of a product, t...

  • Answered by AI
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Naukri.com and was interviewed before Aug 2022. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(1 Question)

  • Q1. 7Qc Tools 8D X- Bar Chart Casting And Machining Defects About Your Self Difference Bt Accuracy and Precision About Gd&T Role And Responsibility Of Your Current Company
Round 3 - HR 

(1 Question)

  • Q1. Why You Want to Join This Company And Last One Is How Much You Expected Ctc
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
2-4 weeks
Result
Selected Selected

I applied via Naukri.com and was interviewed in Aug 2023. There were 4 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Properly align and format text in your resume. A recruiter will have to spend more time reading poorly aligned text, leading to high chances of rejection.
View all tips
Round 2 - HR 

(3 Questions)

  • Q1. Tell me about yourself?
  • Q2. Why do we hire you?
  • Q3. What salary did you expect
Round 3 - Technical 

(3 Questions)

  • Q1. Tell me about your job profile? Roles Responsibilities.
  • Q2. Tell be about manufacturing process which you have been seen in your career
  • Q3. What are core tools of AIAG?
  • Ans. 

    Core tools of AIAG include FMEA, PPAP, MSA, SPC, and APQP.

    • FMEA (Failure Mode and Effects Analysis) is used to identify and prioritize potential failure modes in a process.

    • PPAP (Production Part Approval Process) is used to ensure that suppliers meet customer requirements.

    • MSA (Measurement Systems Analysis) is used to assess the quality of measurement systems.

    • SPC (Statistical Process Control) is used to monitor and contro...

  • Answered by AI
Round 4 - Technical 

(3 Questions)

  • Q1. What are yours failures?
  • Ans. 

    I have experienced failures in project deadlines, communication, and technical solutions.

    • Missed project deadlines due to underestimating tasks

    • Miscommunication with team members leading to misunderstandings

    • Implemented technical solutions that did not meet requirements

  • Answered by AI
  • Q2. What are your achievements?
  • Q3. What is heat treatment process
  • Ans. 

    Heat treatment process is a method used to alter the physical and sometimes chemical properties of a material through heating and cooling.

    • Involves heating the material to a specific temperature

    • Holding it at that temperature for a set amount of time

    • Then cooling it at a controlled rate

    • Can be used to increase hardness, improve machinability, or enhance other properties

    • Common techniques include annealing, quenching, temper

  • Answered by AI
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Not Selected

I applied via Naukri.com and was interviewed in May 2024. There was 1 interview round.

Round 1 - Technical 

(2 Questions)

  • Q1. Explain function pointers in c?
  • Ans. 

    Function pointers in C are pointers that point to functions instead of data.

    • Function pointers are used to pass functions as arguments to other functions.

    • They can be used to implement callbacks and event handlers.

    • Syntax: return_type (*ptr_name)(parameters);

    • Example: int (*funcPtr)(int, int);

  • Answered by AI
  • Q2. Explain DCM module from BSW?
  • Ans. 

    DCM module in BSW is responsible for managing diagnostic communication between the vehicle and external diagnostic tools.

    • DCM stands for Diagnostic Communication Manager

    • It handles communication protocols such as UDS, KWP2000, and OBD

    • DCM manages diagnostic sessions, communication parameters, and diagnostic trouble codes

    • It provides APIs for diagnostic services like reading and clearing DTCs

    • Example: DCM module in BSW facil...

  • Answered by AI

Skills evaluated in this interview

Interview experience
4
Good
Difficulty level
Easy
Process Duration
2-4 weeks
Result
Selected Selected

I applied via Referral and was interviewed in Nov 2023. There was 1 interview round.

Round 1 - Technical 

(3 Questions)

  • Q1. What is the least count of cmm
  • Ans. 

    The least count of a CMM (Coordinate Measuring Machine) is the smallest increment that can be measured by the machine.

    • The least count of a CMM is typically determined by the resolution of its measuring system.

    • For example, if a CMM has a resolution of 0.001 mm, then its least count would be 0.001 mm.

    • The least count is important for ensuring accurate and precise measurements in quality control processes.

  • Answered by AI
  • Q2. Roles & responsibility in previous organisation
  • Q3. Difference between chemical & mechanical properties according to Grades in casting
  • Ans. 

    Chemical properties refer to the behavior of materials in different chemical environments, while mechanical properties refer to how materials respond to applied forces.

    • Chemical properties include corrosion resistance, chemical stability, and reactivity with other substances.

    • Mechanical properties include strength, hardness, ductility, and toughness.

    • Different grades of casting materials will have varying chemical and mec...

  • Answered by AI
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Recruitment Consulltant and was interviewed before Jan 2022. There were 4 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Aptitude Test 

Creo tool commands, objective test with 3 options. Welding symbols, projections, geometric dimensions, mmc, process of manufacturing. Material properties. Bearing types.

Round 3 - Technical 

(3 Questions)

  • Q1. Tool test : casting model to read and create the solid model in creo tool and drawing using layout. Family table, layout creation, parametric and etc.
  • Q2. Your Resume what u added they will ask few depth about your previous tasks. Be confident to answer a know word.
  • Q3. Good to negotiate a best package for suitable and worth person
Round 4 - HR 

(1 Question)

  • Q1. Discussion about package. Joining date, ur certificates and others

Interview Preparation Tips

Topics to prepare for SKF Senior Engineer interview:
  • Material Management
  • Applied materials
  • Machine Design
Interview preparation tips for other job seekers - SKF is very good company. If u take care of ur project well ur boss will take care u with good recognition. U need to work hard and smart to gain any loyalty, be on time, be a active listener.
Interview experience
3
Average
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - HR 

(2 Questions)

  • Q1. How much experience in present Organisation
  • Q2. Please give details of your Family background. ?

Interview Preparation Tips

Interview preparation tips for other job seekers - Best luck keep confidence. Recall all preparation for better results.
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Approached by Company and was interviewed before Jun 2023. There was 1 interview round.

Round 1 - Technical 

(1 Question)

  • Q1. Core tools/Quality Tools ?

Interview Preparation Tips

Interview preparation tips for other job seekers - You need to have Basics clear, Core tools and Quality tools are the major focus area.

I applied via Walk-in and was interviewed in Jul 2021. There was 1 interview round.

Interview Questionnaire 

2 Questions

  • Q1. What is
  • Ans. 

    The question is incomplete or missing.

    • Please provide the complete question for a proper answer.

  • Answered by AI
  • Q2. What is molds products?
  • Ans. 

    Molded products are items created by shaping a material into a specific form using a mold.

    • Molded products are made by pouring or injecting a material into a mold and allowing it to solidify or cure.

    • The mold determines the shape and size of the final product.

    • Common examples of molded products include plastic containers, automotive parts, and rubber seals.

    • Molded products are often used in manufacturing industries for the...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - This interviewer was a technical knowledge. Intervieer seen have a technical knowledge and combustion knowledge and your dishpline.

Skills evaluated in this interview

Texspin Bearings Interview FAQs

How many rounds are there in Texspin Bearings Quality Engineer interview for experienced candidates?
Texspin Bearings interview process for experienced candidates usually has 3 rounds. The most common rounds in the Texspin Bearings interview process for experienced candidates are Resume Shortlist, Aptitude Test and Technical.
How to prepare for Texspin Bearings Quality Engineer interview for experienced candidates?
Go through your CV in detail and study all the technologies mentioned in your CV. Prepare at least two technologies or languages in depth if you are appearing for a technical interview at Texspin Bearings. The most common topics and skills that interviewers at Texspin Bearings expect are Computer Savvy, Inspection, Measurement, Quality Assurance and Quality Control.

Tell us how to improve this page.

Texspin Bearings Quality Engineer Salary
based on 30 salaries
₹1 L/yr - ₹4.6 L/yr
24% less than the average Quality Engineer Salary in India
View more details

Texspin Bearings Quality Engineer Reviews and Ratings

based on 4 reviews

4.9/5

Rating in categories

5.0

Skill development

4.9

Work-life balance

4.9

Salary

4.9

Job security

4.9

Company culture

4.9

Promotions

4.9

Work satisfaction

Explore 4 Reviews and Ratings
Quality Engineer
30 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

QA Engineer
30 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Assistant Manager
22 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Production Engineer
21 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Senior Engineer
20 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Explore more salaries
Compare Texspin Bearings with

SKF

4.0
Compare

Timken

3.9
Compare

Schaeffler India

4.2
Compare

Ntn Bearing

3.7
Compare
Did you find this page helpful?
Yes No
write
Share an Interview