8 Tata Steel Associate Engineer 1 Interview Questions & Answers | Complete Prep Guide 2025

Top Tata Steel Associate Engineer 1 Interview Questions and Answers

Q1. What are notifications in SAP Hana S4 in IW38?

View answer (1)
Q2. What's polarization index in HT Motor Maintenance?

View answer (1)
Q3. A ladder PLC logic for a specific requirement

View answer (1)

Tata Steel Associate Engineer 1 Interview Experiences

3 interviews found

Associate Engineer 1 Interview Questions & Answers

Anonymous

posted on 10 May 2024

Interview experience

Excellent

Difficulty level

Moderate

Process Duration

2-4 weeks

Result

Selected

I applied via Company Website and was interviewed in Apr 2024. There was 1 interview round.

Round 1 - One-on-one

(5 Questions)

Q1. How a flowmeter works

Ans.

A flowmeter measures the flow rate of a fluid or gas by detecting the velocity of the flow.

Flowmeters can use various technologies such as ultrasonic, electromagnetic, thermal, or differential pressure.
The flowmeter measures the velocity of the flow and calculates the flow rate based on the cross-sectional area of the pipe.
Some flowmeters have a display that shows the flow rate in units such as liters per minute or cub

Answered by AI

Add your answer

Q2. What are critical process interlocks in your previous industry

Add your answer

Q3. What are notifications in SAP Hana S4 in IW38?

Ans.

Notifications in SAP Hana S4 in IW38 are alerts or messages that inform users about specific events or tasks in the system.

Notifications in IW38 can be used to alert users about maintenance orders, work orders, or other relevant information.
Users can set up notifications to receive alerts for specific events, such as when a maintenance order is completed or when a work order is overdue.
Notifications can be customized b...

Answered by AI

Add your answer

Q4. What's polarization index in HT Motor Maintenance?

Ans.

Polarization index is a measure of insulation resistance in high tension motor maintenance.

Polarization index is calculated by dividing the insulation resistance at 10 minutes by the insulation resistance at 1 minute.
A high polarization index value indicates good insulation condition, while a low value may indicate insulation degradation.
Regular testing of polarization index helps in detecting insulation issues early a...

Answered by AI

Add your answer

Q5. A ladder PLC logic for a specific requirement

Ans.

A ladder PLC logic for a specific requirement

Identify the specific requirement and break it down into logical steps
Use ladder logic symbols such as contacts, coils, and timers to create the logic
Test the logic in a simulation environment before implementing it in a PLC
Consider safety precautions and error handling in the logic design

Answered by AI

Add your answer

Interview Preparation Tips

Interview preparation tips for other job seekers - For experienced guys they will ask whatever you were doing in previous organisation.

Associate Engineer 1 Interview Questions & Answers

Roshan Dewangan

posted on 12 Jan 2024

Interview experience

Excellent

Difficulty level

Moderate

Process Duration

Less than 2 weeks

Result

Selected

I applied via Company Website and was interviewed in Mar 2023. There were 2 interview rounds.

Round 1 - Technical

(1 Question)

Q1. Aptitude test, reasoning test , general English and Mechatronics technical questions, Process Knowledge

Add your answer

Round 2 - Technical

(1 Question)

Q1. About Galvenizing basics

Add your answer

Interview Preparation Tips

Interview preparation tips for other job seekers - Clear Round 1 online test and at time of interview , remind Process parameter and Work Experiance basis knowledge.

Associate Engineer 1 Interview Questions & Answers

Chandra kanta Nayak

posted on 6 May 2024

Interview experience

Excellent

Difficulty level

Moderate

Process Duration

Less than 2 weeks

Result

Selected

I applied via Company Website and was interviewed before May 2023. There was 1 interview round.

Round 1 - Technical

(1 Question)

Q1. From your own experiences

Add your answer

Interview Preparation Tips

Interview preparation tips for other job seekers - Be thorough in your experience concepts

Top trending discussions

View All

Interview Tips & Stories

5d (edited)

timepasstiwari

A Digital Markter

Got Rejected In an Interview, Just Because I Didn’t Answer a Personal Question

So, I got invited for this interview, and they told me to be there at 9 AM. Of course, I get there early, like 8:30, because I don't want to be late. But then I end up waiting for 1.5 hours... read more

Got a question about Tata Steel?

Ask anonymously on communities.

Interview questions from similar companies

Engineer Interview Questions & Answers

ESL Steel

Anonymous

posted on 13 Mar 2018

I applied via Campus Placement and was interviewed in Jan 2018. There were 5 interview rounds.

Interview Questionnaire

2 Questions

Q1. DM WATER FROM RAW WATER.

Ans.

DM water is produced by removing impurities from raw water through a process called demineralization.

DM water stands for demineralized water.
It is produced by removing minerals and impurities from raw water.
The process of demineralization involves various techniques such as ion exchange, reverse osmosis, and distillation.
DM water is used in various industries like power plants, pharmaceuticals, and electronics manufact...

Answered by AI

Add your answer

Q2. Types of preheater.

Ans.

Preheaters are devices used to heat a substance or material before a process or operation.

Types of preheaters include direct-fired preheaters, indirect-fired preheaters, regenerative preheaters, and recuperative preheaters.
Direct-fired preheaters directly heat the substance using a flame or burner.
Indirect-fired preheaters heat the substance indirectly through a heat transfer medium.
Regenerative preheaters use a rotati...

Answered by AI

Add your answer

Interview Preparation Tips

General Tips: Naurki.com Is very easygoing way to work in company.
Skills: Interpersonal Skills, Presence Of Mind, Communication, Body Language, Analytical Skills, Leadership, Time Management
Duration: 1-4 weeks
College Name: National Power Training Institute, Durgapur

Engineer Interview Questions & Answers

ESL Steel

Anonymous

posted on 26 Jun 2020

I applied via Walk-in and was interviewed before Jun 2019. There were 3 interview rounds.

Interview Questionnaire

2 Questions

Q1. How to know proper coal blend ?

Ans.

Proper coal blend can be determined by analyzing the properties of different coals and their compatibility with each other.

Analyze the properties of different coals such as ash content, volatile matter, fixed carbon, etc.
Determine the required coke quality and select coals that can produce coke of desired quality.
Consider the availability and cost of different coals.
Ensure compatibility of coals by conducting small-sca...

Answered by AI

Add your answer

Q2. Calibration weekly once

Add your answer

Interview Preparation Tips

Interview preparation tips for other job seekers - Ni

Engineer Interview Questions & Answers

ArcelorMittal Nippon Steel

Anonymous

posted on 22 Jan 2021

I applied via Indeed and was interviewed before Jan 2020. There were 5 interview rounds.

Interview Questionnaire

1 Question

Q1. Basic electrical technical question they had asked,

Add your answer

Interview Preparation Tips

Interview preparation tips for other job seekers - For ve

Engineer Interview Questions & Answers

JSW Group

Anonymous

posted on 23 Nov 2022

I applied via Walk-in and was interviewed in May 2022. There was 1 interview round.

Round 1 - Technical

(2 Questions)

Q1. Type of belt Type of bearings Belt replacement Bearings replacement Etc

Ans.

The type of belt and bearings used in engineering and their replacement process.

The type of belt used depends on the application and load requirements.
Common types of bearings include ball bearings, roller bearings, and sleeve bearings.
Belt replacement is necessary when there is wear and tear or damage to the belt.
Bearings replacement is necessary when there is excessive noise, vibration, or heat.
Proper maintenance and...

Answered by AI

Add your answer

Q2. Bearings replacement Belt replacement Conveyor maintenance

Add your answer

Interview Preparation Tips

Interview preparation tips for other job seekers - Hard working and positive effort. Mechanical & Operation department.

Engineer Interview Questions & Answers

Jindal Stainless

Anonymous

posted on 6 May 2023

Interview experience

Average

Difficulty level

Moderate

Process Duration

Less than 2 weeks

Result

I applied via Referral and was interviewed in Nov 2022. There were 3 interview rounds.

Round 1 - Resume Shortlist

Pro Tip by AmbitionBox:

Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.

View all Resume tips

Round 2 - HR

(1 Question)

Q1. Give introduction of yourself.

Ans.

I am a highly motivated engineer with experience in designing and implementing complex systems.

I have a Bachelor's degree in Electrical Engineering from XYZ University.
I have worked as a software engineer at ABC Company for 3 years.
I am proficient in programming languages such as Java, Python, and C++.
I have experience in designing and implementing large-scale systems, including a cloud-based data management system for...

Answered by AI

Add your answer

Round 3 - Technical

(1 Question)

Q1. Technical questions from CCM

Add your answer

Engineer Interview Questions & Answers

ArcelorMittal Nippon Steel

Anonymous

posted on 26 Mar 2023

Interview experience

Excellent

Difficulty level

Moderate

Process Duration

Less than 2 weeks

Result

Selected

I applied via Company Website and was interviewed before Mar 2022. There were 2 interview rounds.

Round 1 - Technical

(1 Question)

Q1. 1. What is sinter or sintering and it's advantages? 2. What is your Key responsibility ? 3. What's your big achievements or shinning point ?

Ans.

Sintering is a process of compacting and forming a solid mass of material by heat or pressure without melting it.

Advantages of sintering include increased strength, improved electrical conductivity, and reduced porosity.
My key responsibility is to oversee the sintering process and ensure that it is carried out efficiently and safely.
My biggest achievement in sintering was developing a new sintering technique that reduc...

Answered by AI

Add your answer

Round 2 - HR

(1 Question)

Q1. 1. Self introduction 2. Experiences 3. Qualifications 4. Family 5. Salary negotiation

View 1 more answer

Interview Preparation Tips

Topics to prepare for ArcelorMittal Nippon Steel Engineer interview:

What about your job

Interview preparation tips for other job seekers - Make the interview confident and whatever you know expressed openly and in the last increased your skills.

Engineer Interview Questions & Answers

JSW Steel

Sushantha Parak

posted on 5 Jun 2023

Interview experience

Excellent

Difficulty level

Moderate

Process Duration

2-4 weeks

Result

Selected

I applied via Campus Placement and was interviewed before Jun 2022. There were 4 interview rounds.

Round 1 - Resume Shortlist

Pro Tip by AmbitionBox:

Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.

View all Resume tips

Round 2 - Aptitude Test

Aptitude test on engineering, GK, reasoning and gk on company

Round 3 - Technical

(4 Questions)

Q1. Questions on Engineering topics

Add your answer

Q2. What Is friction & lubrication

Ans.

Friction is the resistance encountered when one object is moved in contact with another. Lubrication is the process of reducing friction between surfaces in contact.

Friction is the force that opposes the motion of one surface over another.
Lubrication involves using a substance to reduce friction between surfaces in contact.
Friction can be both beneficial (e.g. providing traction for walking) and detrimental (e.g. causi...

Answered by AI

Add your answer

Q3. What is Viscosity

Ans.

Viscosity is a measure of a fluid's resistance to flow.

Viscosity is the internal friction of a moving fluid.
It is the property that determines how easily a fluid can flow.
Higher viscosity fluids flow more slowly than lower viscosity fluids.
Examples of high viscosity fluids include honey and molasses, while water has low viscosity.

Answered by AI

Add your answer

Q4. What the code of coolent ON in CNC programming

Ans.

Coolant ON code is used to activate the coolant system in CNC programming.

Use M08 code to turn on the coolant in CNC programming
Make sure to specify the type of coolant (flood, mist, etc.) in the program
Example: M08 - activates flood coolant system

Answered by AI

Add your answer

Round 4 - HR

(1 Question)

Q1. They ask about your family background

Add your answer

Interview Preparation Tips

Interview preparation tips for other job seekers - If you're from tyre 1 & 2 collage you will get good package.

Skills evaluated in this interview

Tata Steel Interview FAQs

How many rounds are there in Tata Steel Associate Engineer 1 interview?

Tata Steel interview process usually has 1-2 rounds. The most common rounds in the Tata Steel interview process are Technical and One-on-one Round.

What are the top questions asked in Tata Steel Associate Engineer 1 interview?

Some of the top questions asked at the Tata Steel Associate Engineer 1 interview -

What are notifications in SAP Hana S4 in IW...read more
What's polarization index in HT Motor Maintenan...read more
A ladder PLC logic for a specific requirem...read more

Tell us how to improve this page.

Tata Steel Interviews By Designations

Interview Questions for Popular Designations

Tata Steel Associate Engineer 1 Interview Process

based on 3 interviews

Interview experience

Excellent

JSW Steel Interview Questions

3.9

• 595 Interviews

Jindal Steel and Power Interview Questions

3.9

• 313 Interviews

ArcelorMittal Nippon Steel Interview Questions

4.1

• 221 Interviews

Jindal Stainless Interview Questions

4.2

• 207 Interviews

JSW Group Interview Questions

3.9

• 109 Interviews

SHYAM METALICS AND ENERGY Interview Questions

3.6

• 100 Interviews

Jindal Saw Interview Questions

4.0

• 99 Interviews

Rashmi Metaliks Interview Questions

3.4

• 80 Interviews

Viraj Profiles Interview Questions

3.8

• 76 Interviews

Shyam Steel Industries Interview Questions

3.5

• 54 Interviews

View all

Indian Institute of Technology (IIT), Chennai Placement Questions

10 Interviews

Indian Institute of Technology (IIT), Kharagpur Placement Questions

5 Interviews

National Institute of Technology (NIT), Rourkela Placement Questions

5 Interviews

Indian Institute of Technology (IIT), Roorkee Placement Questions

3 Interviews

National Institute of Technology (NIT), Jamshedpur Placement Questions

2 Interviews

Indian Institute of Technology (IIT), Ropar Placement Questions

2 Interviews

Indian Institute of Technology (IIT), Mumbai Placement Questions

2 Interviews

View all

Tata Steel Associate Engineer 1 Salary

based on 68 salaries

₹4.7 L/yr - ₹7 L/yr

30% more than the average Associate Engineer 1 Salary in India

View more details

Tata Steel Salaries in India

Manager 1.6k salaries	₹0 L/yr - ₹0 L/yr
Assistant Manager 1.5k salaries	₹0 L/yr - ₹0 L/yr
Senior Manager 1.2k salaries	₹0 L/yr - ₹0 L/yr
Associate Engineer 910 salaries	₹0 L/yr - ₹0 L/yr
Junior Engineer 900 salaries	₹0 L/yr - ₹0 L/yr