Upload Button Icon Add office photos

Tamilnadu Petroproducts

Compare button icon Compare button icon Compare

Filter interviews by

Clear (1)

Tamilnadu Petroproducts Project Engineer Interview Questions and Answers

Updated 2 Feb 2024

Tamilnadu Petroproducts Project Engineer Interview Experiences

1 interview found

Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
6-8 weeks
Result
Selected Selected

I applied via Naukri.com and was interviewed before Feb 2023. There were 2 interview rounds.

Round 1 - Technical 

(1 Question)

  • Q1. More technical , and related to oil and gas
Round 2 - HR 

(1 Question)

  • Q1. Related to job and development

Interview questions from similar companies

I applied via Naukri.com and was interviewed before Jun 2020. There was 1 interview round.

Interview Questionnaire 

28 Questions

  • Q1. What is mean by safety
  • Ans. 

    Safety refers to the condition of being protected from harm, danger, or injury.

    • Safety involves taking measures to prevent accidents and injuries

    • It includes following rules and regulations to ensure a safe environment

    • Safety can be achieved through proper training and education

    • Examples of safety measures include wearing protective gear, using safety equipment, and practicing safe behaviors

    • Safety is important in all indus...

  • Answered by AI
  • Q2. What is LEL
  • Ans. 

    LEL stands for Lower Explosive Limit and is the minimum concentration of a gas or vapor in air that can ignite.

    • LEL is a safety term used in industries dealing with flammable gases and liquids.

    • It is expressed as a percentage of the gas or vapor in air.

    • If the concentration of the gas or vapor is below the LEL, it is too lean to ignite.

    • If the concentration is above the LEL, it is too rich and can ignite.

    • For example, the L...

  • Answered by AI
  • Q3. What is RA
  • Q4. What is JSA/JHA
  • Ans. 

    JSA/JHA stands for Job Safety Analysis/Job Hazard Analysis. It is a process of identifying potential hazards and risks in a job or task.

    • JSA/JHA is a systematic approach to identify and mitigate potential hazards in a job or task

    • It involves breaking down a job or task into steps and analyzing each step for potential hazards

    • The analysis includes identifying the hazards, assessing the risks, and implementing controls to m...

  • Answered by AI
  • Q5. Role of HSE
  • Ans. 

    HSE plays a crucial role in ensuring the safety and well-being of employees and the environment.

    • HSE stands for Health, Safety, and Environment.

    • It involves identifying and assessing potential hazards and implementing measures to control or eliminate them.

    • HSE also includes training employees on safety procedures and emergency response plans.

    • Examples of HSE measures include wearing personal protective equipment, conductin...

  • Answered by AI
  • Q6. What is Hchem
  • Ans. 

    Hchem is not a known term or acronym in the engineering field.

    • Hchem is not a commonly used term in engineering

    • It is possible that the interviewer misspoke or meant to ask a different question

    • Without more context, it is difficult to provide a more specific answer

  • Answered by AI
  • Q7. What is Hazop
  • Ans. 

    Hazop is a structured and systematic technique used to identify potential hazards and operability problems in industrial processes.

    • Hazop stands for Hazard and Operability Study

    • It involves a team of experts analyzing a process to identify potential hazards and operability issues

    • Hazop is commonly used in the chemical, oil and gas, and pharmaceutical industries

    • The process involves breaking down the process into smaller pa...

  • Answered by AI
  • Q8. What is confined space
  • Ans. 

    Confined space refers to an area that is enclosed and has limited access and ventilation.

    • Examples include tanks, silos, sewers, and tunnels.

    • Workers entering confined spaces must follow safety protocols and use specialized equipment.

    • Hazards in confined spaces include lack of oxygen, toxic gases, and physical obstructions.

    • Proper training and communication are crucial for working in confined spaces.

  • Answered by AI
  • Q9. What is work at height
  • Ans. 

    Work at height refers to any task performed at a height where a person could fall and injure themselves.

    • Work at height involves working on ladders, scaffolding, roofs, or any other elevated surface

    • It is important to use appropriate safety equipment such as harnesses, guardrails, and safety nets

    • Workers should be trained on how to safely work at height and how to properly use safety equipment

    • Examples of work at height in...

  • Answered by AI
  • Q10. Hazard of confined space
  • Ans. 

    Confined spaces pose a significant hazard due to limited entry and exit points, poor ventilation, and potential for hazardous substances.

    • Limited entry and exit points can make it difficult to escape in case of an emergency

    • Poor ventilation can lead to a buildup of toxic gases or lack of oxygen

    • Potential for hazardous substances such as chemicals, fumes, or dust

    • Examples include tanks, silos, sewers, and tunnels

    • Proper trai...

  • Answered by AI
  • Q11. Precautions of confined space
  • Ans. 

    Precautions to be taken while working in confined spaces

    • Proper ventilation and air quality testing

    • Use of personal protective equipment

    • Proper lighting and communication equipment

    • Training and certification for workers

    • Emergency rescue plan in place

  • Answered by AI
  • Q12. What is LEL&UEL
  • Ans. 

    LEL&UEL stands for Lower Explosive Limit and Upper Explosive Limit respectively. They are the minimum and maximum concentrations of a flammable gas or vapor in air that can ignite.

    • LEL is the lowest concentration of a gas or vapor that can ignite

    • UEL is the highest concentration of a gas or vapor that can ignite

    • Concentrations between LEL and UEL are considered flammable

    • LEL and UEL vary depending on the gas or vapor

    • LEL an...

  • Answered by AI
  • Q13. What is competent person
  • Q14. What is fire
  • Ans. 

    Fire is a chemical reaction that releases heat, light, and various gases.

    • Fire is a rapid oxidation process that occurs when fuel (such as wood, paper, or gasoline) combines with oxygen in the presence of heat or a spark.

    • It releases heat, light, and various gases such as carbon dioxide, water vapor, and nitrogen oxides.

    • Fire can be beneficial (such as for cooking or heating) or destructive (such as in wildfires or house ...

  • Answered by AI
  • Q15. Types of fire
  • Ans. 

    There are four types of fire: Class A, Class B, Class C, and Class D.

    • Class A fires involve ordinary combustibles such as wood, paper, or cloth.

    • Class B fires involve flammable liquids or gases such as gasoline, oil, or propane.

    • Class C fires involve electrical equipment such as appliances, wiring, or circuit breakers.

    • Class D fires involve combustible metals such as magnesium, titanium, or sodium.

  • Answered by AI
  • Q16. Type of extinguisher
  • Ans. 

    There are different types of fire extinguishers for different types of fires.

    • Water extinguishers for Class A fires (wood, paper, cloth, etc.)

    • CO2 extinguishers for Class B and C fires (flammable liquids and electrical fires)

    • Dry chemical extinguishers for Class A, B, and C fires

    • Foam extinguishers for Class A and B fires

    • Wet chemical extinguishers for Class K fires (cooking oils and fats)

  • Answered by AI
  • Q17. Modes of heat transfer
  • Ans. 

    Modes of heat transfer include conduction, convection, and radiation.

    • Conduction is the transfer of heat through a material without any movement of the material itself.

    • Convection is the transfer of heat through the movement of fluids, such as air or water.

    • Radiation is the transfer of heat through electromagnetic waves, such as from the sun or a fire.

  • Answered by AI
  • Q18. How to prevent fire
  • Ans. 

    Preventing fire requires proper handling of flammable materials and regular maintenance of electrical equipment.

    • Store flammable materials in designated areas away from heat sources

    • Regularly inspect and maintain electrical equipment

    • Install smoke detectors and fire extinguishers in appropriate locations

    • Train employees on fire safety procedures and evacuation plans

  • Answered by AI
  • Q19. What is msds
  • Ans. 

    MSDS stands for Material Safety Data Sheet.

    • MSDS provides information about hazardous chemicals and substances.

    • It includes information about the physical and chemical properties of the substance, health hazards, precautions for safe handling and use, and emergency procedures.

    • MSDS is required by law for all hazardous chemicals and substances used in the workplace.

    • It is important to read and understand the MSDS before usi...

  • Answered by AI
  • Q20. How to do firefighting
  • Ans. 

    Firefighting involves identifying and extinguishing fires to prevent damage and loss of life.

    • Assess the situation and determine the type and size of fire

    • Use appropriate firefighting equipment such as fire extinguishers, hoses, and pumps

    • Follow safety protocols and wear protective gear

    • Coordinate with other firefighters and emergency responders

    • Evacuate people from the affected area

    • Monitor the situation and ensure the fire

  • Answered by AI
  • Q21. How to prevent the accident
  • Ans. 

    Prevent accidents by identifying potential hazards and implementing safety measures.

    • Conduct regular safety audits and risk assessments

    • Provide proper training and education to employees

    • Implement safety protocols and procedures

    • Use appropriate safety equipment and gear

    • Encourage a culture of safety and accountability

    • Regularly review and update safety policies and procedures

  • Answered by AI
  • Q22. How to investigate the accident
  • Ans. 

    To investigate an accident, follow a systematic approach involving data collection, analysis, and identification of root causes.

    • Gather all available information about the accident, including eyewitness accounts, photographs, and any relevant documents or records.

    • Conduct interviews with individuals involved in the accident to gather their perspectives and insights.

    • Examine the accident scene for physical evidence, such a...

  • Answered by AI
  • Q23. Emergency procedure
  • Q24. What is H2s
  • Ans. 

    H2S is a colorless, flammable, and toxic gas with a strong odor of rotten eggs.

    • H2S is commonly known as hydrogen sulfide.

    • It is produced naturally by the breakdown of organic matter and is found in natural gas, crude oil, and volcanic gases.

    • It is highly toxic and can cause respiratory failure, loss of consciousness, and even death.

    • H2S is used in various industries such as oil and gas, mining, and pulp and paper.

    • It is al...

  • Answered by AI
  • Q25. Properties of H2s
  • Ans. 

    H2S is a colorless, flammable, and toxic gas with a strong odor of rotten eggs.

    • H2S is highly flammable and can ignite easily

    • It is toxic and can cause respiratory failure

    • It has a distinctive odor of rotten eggs

    • H2S is used in the production of sulfuric acid and in the petroleum industry

  • Answered by AI
  • Q26. Hirerchy procedure
  • Q27. Permissible exposure limit of H2s,co,co2,methane
  • Ans. 

    Permissible exposure limits (PEL) are the maximum allowable concentrations of hazardous substances in the workplace.

    • H2S: PEL is 10 ppm (parts per million) over an 8-hour workday

    • CO: PEL is 50 ppm over an 8-hour workday

    • CO2: No specific PEL, but recommended exposure limit is 5,000 ppm over an 8-hour workday

    • Methane: No specific PEL, but recommended exposure limit is 1,000 ppm over an 8-hour workday

  • Answered by AI
  • Q28. Short term exposure limit of H2s
  • Ans. 

    Short term exposure limit (STEL) of H2S is 10 ppm.

    • STEL is the maximum concentration of a substance that a worker can be exposed to for a short period of time without suffering from immediate or long-term health effects.

    • The STEL for H2S is set at 10 ppm (parts per million) by OSHA (Occupational Safety and Health Administration).

    • Exposure to H2S at levels above the STEL can cause symptoms such as eye irritation, headache,...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Keep calm when you are giving the interview and first prepare the interview
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
More than 8 weeks
Result
Selected Selected

I applied via Newspaper Ad and was interviewed before Oct 2022. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all Resume tips
Round 2 - Technical 

(1 Question)

  • Q1. I was asked to make a presentation on laser technology.
Round 3 - Aptitude Test 

Knowledge of the English language, its vocabulary and comprehension. Ability to solve basic mathematical problem, which shows the capacity to use an analytical approach to everyday puzzles.

Interview Preparation Tips

Interview preparation tips for other job seekers - One needs to present a bright visage. Then, you have to open minded towards the solutions to problems, instead of being dogmatic.
Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(2 Questions)

  • Q1. What is upper yield and lower yield in stress strain diagram
  • Ans. 

    Upper and lower yield refer to the stress values at which a material begins to deform plastically.

    • Upper yield is the stress value at which a material begins to deform plastically under increasing stress.

    • Lower yield is the stress value at which a material begins to deform plastically under decreasing stress.

    • These values are important in determining the strength and ductility of a material.

    • For example, if a material has ...

  • Answered by AI
  • Q2. What is difference between toughness and hardness
  • Ans. 

    Toughness is the ability to withstand stress without breaking, while hardness is the ability to resist indentation or scratching.

    • Toughness is a measure of a material's ability to absorb energy before breaking or fracturing.

    • Hardness is a measure of a material's resistance to indentation or scratching.

    • Toughness is important in materials that are subjected to impact or shock loading, while hardness is important in materia...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Keep basics strong, be confident and mention past leadership actions taken

I applied via Company Website and was interviewed before Jul 2021. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Don’t add your photo or details such as gender, age, and address in your resume. These details do not add any value.
View all Resume tips
Round 2 - Technical 

(5 Questions)

  • Q1. Training in rail wheel plant
  • Q2. Technical questions about cp vessel and pressure vessel and equipment
  • Q3. Types of equipment used in piping industry
  • Ans. 

    Various types of equipment are used in the piping industry for different purposes.

    • Pumps

    • Compressors

    • Valves

    • Heat exchangers

    • Filters

    • Storage tanks

    • Piping materials

    • Flanges

    • Gaskets

    • Instrumentation and control systems

  • Answered by AI
  • Q4. What is the standard code of pipe
  • Ans. 

    The standard code of pipe refers to the set of regulations and specifications that govern the design, construction, and use of pipes in various industries.

    • The standard code of pipe varies depending on the industry and the type of pipe being used.

    • For example, in the oil and gas industry, the American Petroleum Institute (API) provides standards for pipes used in drilling and production operations.

    • In the construction ind...

  • Answered by AI
  • Q5. Tell me about isometric drawing
  • Ans. 

    Isometric drawing is a 3D representation of an object on a 2D surface.

    • It shows all three dimensions of an object in a single view.

    • It uses a 30-degree angle for all three axes.

    • It is commonly used in engineering and construction to show piping and structural details.

    • Isometric drawings are often created using computer-aided design (CAD) software.

    • They are useful for visualizing how different parts of a system fit together.

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Hello sir, I m a project engineer and doing a job for Sparsh Pvt Ltd. So I m seeking a job for best opportunity with my experience.thanku

Skills evaluated in this interview

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all Resume tips
Round 2 - Technical 

(1 Question)

  • Q1. Projects details in previous company

Interview Preparation Tips

Interview preparation tips for other job seekers - Keep updated your technical knowledge.
Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(1 Question)

  • Q1. Piping project related questions
Interview experience
4
Good
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Company Website and was interviewed before Mar 2023. There was 1 interview round.

Round 1 - Technical 

(2 Questions)

  • Q1. Type of level instruments?
  • Ans. 

    Level instruments are devices used to measure the level of liquids or solids in tanks or containers.

    • Types of level instruments include ultrasonic level sensors, radar level sensors, capacitance level sensors, and float level sensors.

    • Ultrasonic level sensors use sound waves to determine the level of a substance in a tank.

    • Radar level sensors use microwave signals to measure the level of a substance in a tank.

    • Capacitance ...

  • Answered by AI
  • Q2. Types of permit
  • Ans. 

    Permits are legal documents that allow individuals or companies to perform certain activities or projects.

    • Building permits are required for construction projects to ensure compliance with building codes.

    • Environmental permits are needed for activities that may impact the environment, such as waste disposal or emissions.

    • Zoning permits regulate land use and ensure that properties are used appropriately within designated z...

  • Answered by AI
Interview experience
5
Excellent
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Recruitment Consulltant and was interviewed in Dec 2024. There was 1 interview round.

Round 1 - Technical 

(2 Questions)

  • Q1. About project in depth
  • Q2. What are some technical questions related to your job description?

Interview Questionnaire 

3 Questions

  • Q1. Piping engineer
  • Q2. No question
  • Q3. QA QC engineer
Contribute & help others!
anonymous
You can choose to be anonymous

Tamilnadu Petroproducts Interview FAQs

How many rounds are there in Tamilnadu Petroproducts Project Engineer interview?
Tamilnadu Petroproducts interview process usually has 2 rounds. The most common rounds in the Tamilnadu Petroproducts interview process are Technical and HR.

Recently Viewed

INTERVIEWS

Infineon Technologies

No Interviews

INTERVIEWS

GlowTouch Technologies

No Interviews

INTERVIEWS

Codingmart Technologies

No Interviews

INTERVIEWS

Codingmart Technologies

No Interviews

INTERVIEWS

Codingmart Technologies

No Interviews

INTERVIEWS

Infineon Technologies

No Interviews

INTERVIEWS

Infineon Technologies

No Interviews

INTERVIEWS

GlowTouch Technologies

No Interviews

LIST OF COMPANIES

Codingmart Technologies

Locations

INTERVIEWS

Codingmart Technologies

No Interviews

Tell us how to improve this page.

Tamilnadu Petroproducts Project Engineer Interview Process

based on 1 interview

Interview experience

5
  
Excellent
View more

Interview Questions from Similar Companies

Bharat Petroleum Interview Questions
4.2
 • 148 Interviews
Nayara Energy Interview Questions
4.2
 • 78 Interviews
GAIL Interview Questions
4.5
 • 64 Interviews
Cairn Energy Interview Questions
3.9
 • 29 Interviews
View all

Fast track your campus placements

View all
Tamilnadu Petroproducts Project Engineer Salary
based on 15 salaries
₹4 L/yr - ₹8.5 L/yr
12% more than the average Project Engineer Salary in India
View more details

Tamilnadu Petroproducts Project Engineer Reviews and Ratings

based on 5 reviews

4.5/5

Rating in categories

3.9

Skill development

4.4

Work-life balance

3.4

Salary

2.7

Job security

4.3

Company culture

2.8

Promotions

3.8

Work satisfaction

Explore 5 Reviews and Ratings
Senior Engineer
102 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Junior Technician
36 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Assistant Manager
33 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Senior Production Engineer
24 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Field Engineer
16 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Explore more salaries
Compare Tamilnadu Petroproducts with

Reliance Industries

4.0
Compare

Indian Oil Corporation

4.4
Compare

Bharat Petroleum

4.2
Compare

Hindustan Petroleum

4.2
Compare
Did you find this page helpful?
Yes No
write
Share an Interview