Upload Button Icon Add office photos

Filter interviews by

Clear (1)

SYSTRA Graduate Engineer Trainee (Get) Interview Questions and Answers

Updated 11 Mar 2023

SYSTRA Graduate Engineer Trainee (Get) Interview Experiences

1 interview found

Interview experience
4
Good
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Campus Placement and was interviewed in Sep 2022. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all Resume tips
Round 2 - One-on-one 

(3 Questions)

  • Q1. Tell me about yourself
  • Q2. Where are you from, family background
  • Q3. Difference between LSM and WSM
  • Ans. 

    LSM and WSM are two different methods of measuring soil moisture content.

    • LSM stands for Laboratory Soil Moisture and WSM stands for Field Water Content.

    • LSM measures the moisture content of soil samples in a laboratory setting.

    • WSM measures the water content of soil in the field using various methods such as gravimetric, neutron probe, and time domain reflectometry.

    • LSM is more accurate but time-consuming, while WSM is le...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - The interview is easy, my panel was very good. Just study the basics of Concrete Design and Structural Analysis.

Interview questions from similar companies

I was interviewed in Oct 2016.

Interview Questionnaire 

3 Questions

  • Q1. Tell us about yourself
  • Ans. 

    I am a recent graduate with a degree in engineering, seeking a trainee position to apply my knowledge and skills.

    • Recent graduate with a degree in engineering

    • Seeking a trainee position

    • Knowledge and skills in engineering

    • Motivated and eager to learn

    • Strong problem-solving and analytical skills

  • Answered by AI
  • Q2. What did you learn during your internships?
  • Ans. 

    During my internships, I learned various technical skills and gained practical experience in engineering projects.

    • Developed proficiency in using engineering software and tools

    • Enhanced problem-solving and critical thinking abilities

    • Improved communication and teamwork skills

    • Learned to apply theoretical knowledge to real-world projects

    • Gained insights into industry practices and standards

  • Answered by AI
  • Q3. Questions based on the assignment I did in my internship

Interview Preparation Tips

Round: Test
Experience: The test was in MCQ format for both technical and aptitude & general knowledge sections. The difficulty level was average. There were around 5 general knowledge/current affairs questions. About 15 quantitative aptitude questions and 20 technical questions from subjects taught till 6th semester. 11 out of 18 students were shortlisted for the next round.
Tips: Brush up your basics in all the major subjects. Refer quantitative aptitude books and practice every type of sums.
Duration: 1 hour
Total Questions: 40

Round: Group Discussion
Experience: All 11 shortlisted students were part of the same GD. We were given 5 topics out of which we had to decide on unanimously. All the topics were general/social in nature and not related to current affairs of the world. 10 mins are given after the selection of the topic to think and jot down the points. The first person to start speaking has to introduce the topic and then start to put his point. There should also be a consensus during the end.
Tips: Use your initial 10 mins well. Write down all the points for both for and against of the topic. You need not necessarily stick to one aspect. Don't speak too much or too less. Just the apt! Give chance to others as well but at the same time don't hesitate and hold yourself back. You can also say "I agree with this but I would also add.." or " I disagree with this point, I feel...". But these statements should be very polite.
Duration: 30 minutes

Round: Technical + HR Interview
Experience: 8 students out of 11 were shortlisted for this round. This round was individual interview by a panel of two of company's officials. They asked questions from different sections to all the students. Some of them were asked application based questions for example is it easier to dry clothes in hot and humid outside than in an air conditioned room, what is the use of psychrometric charts, is cooling tower efficient. In my case the questions were based on my internships. I did my internships from consultancies like Jacobs so they asked my about basic documents used in the those companies and also about my assignments that I did.
Tips: Basics are very important in this round and so is your internships, project(if any). Keep your mind open while answering, workout all the conditions in your mind related to the question.

College Name: Thadomal Shahani Engineering College

I was interviewed before Sep 2016.

Interview Questionnaire 

3 Questions

  • Q1. Tell me about yourself?
  • Ans. 

    I am a recent graduate with a degree in Mechanical Engineering and a passion for problem-solving and innovation.

    • Recent graduate with a degree in Mechanical Engineering

    • Passionate about problem-solving and innovation

    • Experience with CAD software like AutoCAD and SolidWorks

    • Completed internships at engineering firms

    • Strong communication and teamwork skills

  • Answered by AI
  • Q2. What are your strength and weaknesses?
  • Ans. 

    My strength lies in my strong analytical skills and ability to work well in a team. My weakness is that I can be overly critical of my own work.

    • Strength: Strong analytical skills

    • Strength: Ability to work well in a team

    • Weakness: Being overly critical of my own work

  • Answered by AI
  • Q3. Why do you want to join L & T?
  • Ans. 

    I want to join L&T because of its reputation as a leading engineering company and the opportunities it offers for professional growth.

    • L&T is known for its excellence in engineering and construction projects.

    • I am impressed by L&T's commitment to innovation and technological advancements.

    • L&T provides a platform for learning and development through its Graduate Engineer Trainee program.

    • I believe that working at L&T will p...

  • Answered by AI

Interview Preparation Tips

Round: Resume Shortlist
Experience: Candidates were shortlisted based on their CGPA: top 40 (for Civil), top 20 (for Mechanical), top 15 (for ECE), top 10 (for Automobile) & Top 10 (for Mechatronics)
Tips: Have Good CGPA!

Round: Test
Experience: They will give 50 questions, each question carries 2 marks and duration of the test is one hour.

1. English (approximately 12 ques) like direct & indirect speech, antonyms, fill in the blanks etc and these questions are very easy.
2. Aptitude (10qus) very easy
3. Reasoning
4. Data Sufficiency
5. Data interpretation
Tips: Try to solve Reasoning Questions from R.S. Aggarwal.
Duration: 1 hour
Total Questions: 150

Round: Technical + HR Interview
Experience: Good Experience! I was asked questions about electrical basics, and logical questions like swapping algorithm alternatives. 45 min interview. This was college campus interview.There was a screening test. The interview was on the same day. Initial questions about resume and projects.power systems/ machines basics
Tips: Be calm and Logical.

Skills: Team Working Ability, Speaking Skills
College Name: Mnit

I was interviewed before Jan 2016.

Interview Preparation Tips

Round: Test
Duration: 1 hour 30 minutes
Total Questions: 65

College Name: MNNIT

I was interviewed in Dec 2016.

Interview Preparation Tips

Round: Test
Experience: Test contained two sections:
First section was of 60 minutes containing 60 questions of general aptitude and second was of 20 minutes containing 51 questions of english.
Tips: Aptitude was easy but you have to be quick to solve the problem. Specially in english section you have to be sharp because time was very less for such no. of questions.
Duration: 1 hour 20 minutes
Total Questions: 111

Round: Technical + HR Interview
Experience: Initially they asked my core topics on which I replied RCC and Concrete technology, so they asked the questions only from these topics. In the end some hr questions were asked.
Tips: Be specific with your answer. Don't try to be oversmart and give vague answers. If you don't know any answer just told them frankly that you don't know this. Be calm and don't panic.

Skills: Technical Questions
College Name: IIT Varanasi

Interview Preparation Tips

Round: Resume Shortlist
Experience: We were asked to fill our resume in the L&T website. Based on the resume, the top 30 students were allowed to sit for the technical interview.
Tips: Preparation for this round should start from the first semester itself. The CGPA should be maintained in the higher range.

College Name: NIT Durgapur

I was interviewed in Aug 2016.

Interview Questionnaire 

13 Questions

  • Q1. Tell me about yourself?
  • Ans. 

    I am a recent graduate with a degree in Mechanical Engineering and a passion for problem-solving and innovation.

    • Recent graduate with a degree in Mechanical Engineering

    • Passionate about problem-solving and innovation

    • Experience with CAD software like SolidWorks

    • Completed internships at engineering firms

  • Answered by AI
  • Q2. Why L&T?
  • Ans. 

    L&T is a renowned company known for its excellence in engineering and construction.

    • L&T has a strong reputation in the industry for delivering high-quality projects.

    • The company offers excellent opportunities for career growth and development.

    • L&T has a diverse range of projects across various sectors, providing exposure to different domains.

    • The company values innovation and encourages employees to think creatively.

    • L&T ha...

  • Answered by AI
  • Q3. What will be the cost of painting the wall behind me?
  • Ans. 

    The cost of painting the wall behind me cannot be determined without additional information.

    • The cost of painting a wall depends on various factors such as the size of the wall, the type of paint used, and the labor charges.

    • Additional information needed includes the dimensions of the wall, the type of paint desired, and the cost of labor per square foot or hour.

    • Once these details are provided, an estimate can be calcula...

  • Answered by AI
  • Q4. What do you mean by M25 concrete?
  • Ans. 

    M25 concrete is a mix of concrete with a compressive strength of 25 MPa.

    • M25 concrete is commonly used in construction for foundations, columns, and beams.

    • It is made by mixing cement, sand, and coarse aggregates in a ratio of 1:1:2.

    • The water-cement ratio should be around 0.45 for M25 concrete.

    • The compressive strength of M25 concrete is achieved after 28 days of curing.

    • M25 concrete is suitable for moderate exposure condi

  • Answered by AI
  • Q5. What are some concrete tests?
  • Ans. 

    Concrete tests are used to determine the strength and quality of concrete.

    • Compression test measures the strength of concrete under compression

    • Slump test measures the consistency and workability of fresh concrete

    • Air content test measures the amount of air trapped in concrete

    • Water permeability test measures the ability of concrete to resist water penetration

    • Rebound hammer test measures the surface hardness of concrete

  • Answered by AI
  • Q6. Explain water absorption test.
  • Ans. 

    Water absorption test is a measure of the amount of water absorbed by a material under specified conditions.

    • The test is used to determine the porosity and permeability of a material.

    • It involves immersing the material in water for a specified period of time and then measuring the weight gain.

    • The percentage of weight gain is calculated and used to determine the water absorption rate of the material.

    • The test is commonly u...

  • Answered by AI
  • Q7. What are the steps to be followed after receiving the plan of a construction?
  • Ans. 

    After receiving the plan of a construction, the following steps should be followed.

    • Review the plan thoroughly to understand the scope and requirements of the project.

    • Identify any potential issues or conflicts in the plan and communicate them to the relevant stakeholders.

    • Create a detailed project schedule and timeline based on the plan.

    • Allocate resources and manpower according to the requirements of the plan.

    • Obtain nece...

  • Answered by AI
  • Q8. Disadvantage of chain surveying?
  • Ans. 

    Chain surveying is time-consuming and requires skilled personnel.

    • Requires a lot of time and effort to set up and measure accurately

    • Not suitable for large areas or uneven terrain

    • Errors can accumulate quickly and lead to inaccurate results

    • Requires skilled personnel to operate and interpret data

    • Difficult to use in areas with obstacles or obstructions

    • May not be suitable for certain types of surveys, such as topographical s

  • Answered by AI
  • Q9. Numerical problem based on total unit weight and water content of soil.
  • Q10. What is your final year project about?
  • Ans. 

    My final year project is about designing a smart irrigation system using IoT technology.

    • Utilizing sensors to monitor soil moisture levels

    • Automating the irrigation process based on real-time data

    • Implementing a mobile app for remote monitoring and control

    • Reducing water wastage and improving crop yield

    • Example: Using Arduino sensors to measure soil moisture and control water pumps

  • Answered by AI
  • Q11. What did you do in your final year training?
  • Ans. 

    I completed a project on renewable energy systems in my final year training.

    • Researched different types of renewable energy sources

    • Designed and implemented a small-scale renewable energy system

    • Analyzed the performance and efficiency of the system

    • Presented findings and recommendations to faculty and peers

  • Answered by AI
  • Q12. Will you be able to do site work?
  • Ans. 

    Yes, I am willing and able to do site work.

    • I have experience working on construction sites during my previous internships.

    • I am physically fit and able to handle the demands of site work.

    • I understand the importance of safety protocols and will adhere to them at all times.

    • I am a quick learner and will adapt to any new challenges that arise on site.

  • Answered by AI
  • Q13. Who will look after your parents?
  • Ans. 

    I have a strong support system in place to ensure my parents are well taken care of, including family members, caregivers, and financial planning.

    • My siblings and I have a plan in place to share responsibilities for our parents' care.

    • We have hired caregivers to assist with daily tasks and provide companionship.

    • We have set up a financial plan to cover any medical expenses or long-term care needs.

    • We have regular check-ins...

  • Answered by AI

Interview Preparation Tips

Round: Resume Shortlist
Experience: We were asked to fill our resume on the company website. The top 30 students were allowed to sit for the aptitude test.
Tips: Preparation for this round should start from the first semester itself. CGPA should be maintained properly, preferably over 8

Round: Test
Experience: The QA questions were easy to medium level aptitude questions. For someone preparing for competitive exams like GATE or CAT, the section would be relatively easier. The verbal section included comprehensions, and grammar questions.
Tips: Practice aptitude questions from websites like indiabix.com from the beginning of your final year. Also look at previous year questions for the company you are appearing for.
Duration: 1 hour 30 minutes
Total Questions: 50

Round: Technical + HR Interview
Experience: The interview was a mix of technical and HR questions. Answered the HR questions confidently. Was not able to answer some technical questions but explained most of them when the interview gave some hints. Overall it was a pleasant interview.
Tips: HR questions like 'Describe yourself' ' 'Where do you see yourself in 'x' years' are general interview questions and should be prepared well. Listening to the pre interview presentation is also very important, mainly the career and salary graphs. As L&T is a core civil company, a sound knowledge is required. Be ready to use concepts from class XI and XII too. Be prepared to answer questions from your project and training.
Don't make wild guesses. If don't know the answer to any question, say so. If you are unsure about an answer, take permission to make a guess. Take time to think before answering. In case of conceptual questions, think aloud. If the interviewer sees that you are technically sound, he himself will nudge you towards the correct answer. And be confident. Don't be scared. Sit straight and answer clearly and smartly.

College Name: NIT Durgapur

Skills evaluated in this interview

I was interviewed before Sep 2016.

Interview Questionnaire 

4 Questions

  • Q1. Why do you want to join the company?
  • Ans. 

    I want to join the company because of its reputation for innovation and growth opportunities.

    • Company's reputation for innovation and growth

    • Opportunities for career development

    • Alignment with my career goals and values

  • Answered by AI
  • Q2. What profile would you like to like to work in?
  • Ans. 

    I would like to work in a challenging and dynamic role that allows me to utilize my technical skills and creativity.

    • Preferably in a field related to mechanical engineering

    • Opportunity for continuous learning and growth

    • Collaborative work environment

    • Possibility to work on innovative projects

    • Room for advancement and leadership opportunities

  • Answered by AI
  • Q3. Tell me about your Projects?
  • Ans. 

    I have worked on various projects during my studies, including a smart home automation system and a mobile app for tracking personal fitness goals.

    • Developed a smart home automation system using Arduino and Raspberry Pi

    • Designed and implemented a mobile app for tracking personal fitness goals

    • Collaborated with a team of engineers to develop a prototype for a solar-powered water purification system

    • Conducted research and an...

  • Answered by AI
  • Q4. Place of posting may be a problem or not?

Interview Preparation Tips

Round: Resume Shortlist
Experience: Candidates among Top 30 from Each branch was selected for Aptitude Test.
Tips: Maintain CGPA so that you can be among top 20-30 in your branch.

Round: Test
Experience: Two sections:
1) Aptitude
2) English
Tips: Try to do the questions from each section as they may have minimum cut-off criteria.
Duration: 2 hours
Total Questions: 200

Round: Technical + HR Interview
Experience: A normal conversation about you and your background and then they asked questions mainly based on CV.

Tips: Try to maintain the pace with the interviewer, Listen to the questions properly and be true towards it.

Skills: Technical Skill, Speaking Skills
College Name: NIT Hamirpur

Interview Preparation Tips

Round: Test
Experience: 15 quantitative 15 Verbal English 20 Reasoning / Analytical questions were above average level. and as per me, it was very to clear the cutoff.
Duration: 50 minutes

Round: Technical Interview
Experience: Questions related to project workdone by me were only asked. my project was on back analysis of liquefied dams.

Round: HR Interview
Experience: TATA Nano project was discussed and my opinion was asked. my ti+pi+hr was only for 7 mins approximately. After facing so many exhaustive interviews ,i felt this one as very soothing. the interviewers very modest and supporting while answering.

Skill Tips: Prepare core portion only, it was my luck only that they didn't ask me technical.
College Name: NIT WARANGAL

Interview Questionnaire 

5 Questions

  • Q1. Types of concrete grades
  • Ans. 

    Concrete grades are classified based on their strength and durability.

    • Concrete grades range from M5 to M100.

    • M stands for mix and the number after it represents the compressive strength of concrete in megapascals (MPa).

    • Higher grade concrete is used for heavy-duty structures like bridges and dams, while lower grade concrete is used for lighter structures like sidewalks and driveways.

  • Answered by AI
  • Q2. Highway pavement
  • Q3. Design of steel & concrete structures
  • Ans. 

    Design of steel & concrete structures involves the use of mathematical calculations and engineering principles to create safe and efficient structures.

    • Structural analysis and design

    • Material selection and testing

    • Load calculations and distribution

    • Construction techniques and methods

    • Code compliance and safety regulations

  • Answered by AI
  • Q4. Tell me about yourself
  • Ans. 

    I am a highly motivated and experienced professional with a passion for learning and growth.

    • I have a degree in Business Administration and have worked in various industries such as finance, marketing, and technology.

    • I am a quick learner and enjoy taking on new challenges.

    • I am a team player and have experience working in both small and large teams.

    • I am proficient in Microsoft Office and have experience with various proj...

  • Answered by AI
  • Q5. What do you know about L&T
  • Ans. 

    L&T is an Indian multinational conglomerate company headquartered in Mumbai.

    • L&T stands for Larsen & Toubro.

    • It operates in various sectors including engineering, construction, technology, and financial services.

    • It is one of the largest companies in India with a market capitalization of over $100 billion.

    • Some of its notable projects include the construction of the Statue of Unity in Gujarat and the Hyderabad Metro Rail p...

  • Answered by AI

Interview Preparation Tips

Round: Test
Experience: Basic aptitude but lengthy Reasoning questions, analytical questions were moderately tough.
Duration: 60 minutes

Round: HR Interview
Experience: It was cool and challenging. Nothing is done till the result is out.

General Tips: Keep yourselves strong and concentrate on what the interviewer asks. Be aware about the current affairs and about the company before going to the interview.
College Name: NIT WARANGAL
Contribute & help others!
anonymous
You can choose to be anonymous

SYSTRA Interview FAQs

How many rounds are there in SYSTRA Graduate Engineer Trainee (Get) interview?
SYSTRA interview process usually has 2 rounds. The most common rounds in the SYSTRA interview process are Resume Shortlist and One-on-one Round.

Recently Viewed

PHOTOS

InsuranceDekho

3 office photos

LIST OF COMPANIES

Credit Bajaar

Overview

INTERVIEWS

Genpact

No Interviews

INTERVIEWS

Kantar Operations

No Interviews

INTERVIEWS

Larsen & Toubro Limited

No Interviews

INTERVIEWS

Infosys BPM

No Interviews

INTERVIEWS

LTIMindtree

No Interviews

INTERVIEWS

Wipro

No Interviews

INTERVIEWS

Ameriprise Financial

No Interviews

INTERVIEWS

Researchwire Knowledge Solutions

No Interviews

Tell us how to improve this page.

SYSTRA Graduate Engineer Trainee (Get) Interview Process

based on 1 interview

Interview experience

4
  
Good
View more
Structural Engineer
32 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Architect
31 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

CAD Technician
28 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Section Engineer
24 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Site Engineer
23 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Explore more salaries
Compare SYSTRA with

AECOM

4.2
Compare

Jacobs Engineering Group

4.1
Compare

WSP

4.2
Compare

Parsons Corporation

4.1
Compare
Did you find this page helpful?
Yes No
write
Share an Interview
Rate your experience using AmbitionBox
Terrible
Terrible
Poor
Poor
Average
Average
Good
Good
Excellent
Excellent