Upload Button Icon Add office photos

Filter interviews by

Syrma SGS Technologies Electrical Engineer Interview Questions and Answers

Updated 10 Mar 2022

Syrma SGS Technologies Electrical Engineer Interview Experiences

1 interview found

I applied via Campus Placement and was interviewed before Mar 2021. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(3 Questions)

  • Q1. What are the fundamental components of electric circuits?
  • Ans. 

    The fundamental components of electric circuits include voltage sources, resistors, capacitors, inductors, and switches.

    • Voltage sources provide the electrical energy needed for the circuit to operate.

    • Resistors control the flow of current in the circuit.

    • Capacitors store and release electrical energy.

    • Inductors store energy in a magnetic field.

    • Switches control the flow of current by opening or closing the circuit.

    • Other co...

  • Answered by AI
  • Q2. What are basic electrical skills?
  • Ans. 

    Basic electrical skills include knowledge of circuits, wiring, and electrical safety.

    • Understanding of Ohm's law and circuit analysis

    • Ability to read and interpret electrical schematics

    • Familiarity with electrical codes and regulations

    • Knowledge of electrical safety practices

    • Proficiency in using electrical tools and equipment

    • Experience with troubleshooting electrical systems

  • Answered by AI
  • Q3. What are technical skills
Round 3 - HR 

(1 Question)

  • Q1. Department related questions

Interview Preparation Tips

Interview preparation tips for other job seekers - Be strong with your valuable answers... Don't fear about anything else.... Be positive and hope... Concentrate on ur technical part...

Interview questions from similar companies

I applied via Referral and was interviewed before May 2020. There were 4 interview rounds.

Interview Questionnaire 

4 Questions

  • Q1. About line balancing
  • Q2. Kaizen
  • Q3. Manpower handling
  • Q4. Productivity achievement

Interview Preparation Tips

Interview preparation tips for other job seekers - Was good

I applied via Other and was interviewed before Oct 2019. There were 3 interview rounds.

Interview Questionnaire 

2 Questions

  • Q1. How to react in a critical situation to customer. Need to explain about the issue or give solution for the issue?
  • Q2. How are you going to handle a 5 member team

Interview Preparation Tips

Interview preparation tips for other job seekers - Please prepare in management level as well
Interview experience
5
Excellent
Difficulty level
Hard
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Walk-in and was interviewed in Nov 2023. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(1 Question)

  • Q1. Previous experience in technical knowledge
  • Ans. 

    I have over 10 years of experience in various technical roles, including software development, system architecture, and project management.

    • 10+ years of experience in technical roles

    • Strong background in software development

    • Experience in system architecture and project management

  • Answered by AI
Round 3 - One-on-one 

(1 Question)

  • Q1. Salary discussion

Interview Preparation Tips

Interview preparation tips for other job seekers - All the best

I applied via Naukri.com and was interviewed before Sep 2021. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(3 Questions)

  • Q1. PLC programming, TPM, MTTR, MTBF
  • Q2. How to deal with chinese counterparts
  • Ans. 

    Understand cultural differences, build relationships, communicate clearly and respectfully.

    • Research and learn about Chinese culture and customs.

    • Be patient and build relationships before discussing business.

    • Communicate clearly and respectfully, avoiding direct confrontation.

    • Be aware of nonverbal communication and body language.

    • Use a translator if necessary.

    • Be prepared for negotiations and understand the importance of sa...

  • Answered by AI
  • Q3. How to deal with colleagues
Round 3 - HR 

(1 Question)

  • Q1. Salary discussion, Why changing

Interview Preparation Tips

Interview preparation tips for other job seekers - Communication in good English language
To the point answer
Only truth
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
2-4 weeks
Result
Selected Selected

I applied via Referral and was interviewed in Jun 2023. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(2 Questions)

  • Q1. Technical respective experience
  • Q2. EMS technical experience
Round 3 - HR 

(1 Question)

  • Q1. Salary expectation
Interview experience
5
Excellent
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Naukri.com and was interviewed in Mar 2024. There were 2 interview rounds.

Round 1 - HR 

(2 Questions)

  • Q1. Tell me about yourself?
  • Ans. 

    I am a Senior Engineer with 10+ years of experience in designing and implementing complex systems.

    • 10+ years of experience in engineering

    • Specialize in designing and implementing complex systems

    • Strong problem-solving skills

    • Proficient in various programming languages such as Java, Python, and C++

  • Answered by AI
  • Q2. Why do you want to change your current job?
  • Ans. 

    Seeking new challenges and opportunities for growth.

    • Desire for career advancement

    • Looking for new challenges and learning opportunities

    • Seeking better work-life balance

    • Interested in working with new technologies or industries

  • Answered by AI
Round 2 - Technical 

(3 Questions)

  • Q1. How to you handle Manpower
  • Ans. 

    I handle manpower by delegating tasks effectively, providing clear instructions, and offering support and guidance when needed.

    • Delegate tasks based on team members' strengths and expertise

    • Provide clear instructions and expectations for each task

    • Offer support and guidance to team members when needed

    • Regularly communicate with team members to ensure progress and address any issues

    • Recognize and reward team members for thei

  • Answered by AI
  • Q2. What is line balancing and how do you do it?
  • Ans. 

    Line balancing is the process of assigning tasks to workstations in a way that evens out the workload and maximizes efficiency.

    • Identify the tasks required to complete a process

    • Determine the cycle time for each task

    • Assign tasks to workstations based on cycle time to balance workload

    • Adjust as needed to optimize efficiency

    • Example: In a manufacturing plant, line balancing ensures each workstation has a similar amount of wo

  • Answered by AI
  • Q3. What is Electrostatic Discharge?
  • Ans. 

    Electrostatic Discharge (ESD) is the sudden flow of electricity between two electrically charged objects caused by contact, an electrical short, or dielectric breakdown.

    • ESD can damage electronic components and devices, leading to malfunctions or complete failure.

    • It can occur when a person touches a metal object after walking on a carpet, or when connecting/disconnecting cables or components.

    • Preventive measures include ...

  • Answered by AI

I applied via Walk-in and was interviewed before Nov 2021. There were 9 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - One-on-one 

(1 Question)

  • Q1. Why working here,what is planning of this company?
Round 3 - Aptitude Test 

What is meaning of ESD,if not using ESD then what is problems?

Round 4 - Aptitude Test 

Meaning of 5s ..what is 5s ,where are using of 5s methods

Round 5 - HR 

(2 Questions)

  • Q1. What is acceptable sallery,if joing here then what is growth of company
  • Ans. 

    Acceptable salary depends on experience and industry standards. Company growth is promising with new projects and opportunities.

    • Acceptable salary varies based on experience, skills, and industry standards.

    • The company has promising growth with new projects and opportunities.

    • Salary and growth can be discussed further during the interview process.

    • The company values employee satisfaction and strives to provide competitive ...

  • Answered by AI
  • Q2. What is planning of this company growth in future?
Round 6 - Technical 

(1 Question)

  • Q1. What is mes,why using of company for mes ?
Round 7 - Assignment 

How to prepare for line balance,what is planning in your minds

Round 8 - Technical 

(1 Question)

  • Q1. What is meaning of 4c, what using for every company
  • Ans. 

    4C is a business model framework that helps companies analyze and improve their marketing strategies.

    • 4C stands for Customer, Cost, Convenience, and Communication.

    • It is used to evaluate a company's marketing mix and identify areas for improvement.

    • For example, a company may use 4C to determine if their product is priced appropriately for their target customer, if it is easily accessible, and if their communication channe...

  • Answered by AI
Round 9 - Assignment 

Planning for line balance and how to control in line running then what is rejection comming the how to control

Interview Preparation Tips

Interview preparation tips for other job seekers - Overall excellent work in Dixon tecnologies India limited Tirupati

I applied via Naukri.com and was interviewed in Dec 2021. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(2 Questions)

  • Q1. About current profile
  • Q2. Role and resposiblity

Interview Preparation Tips

Interview preparation tips for other job seekers - be confident, prepared for technical and HR interview

I applied via Approached by Company and was interviewed in May 2022. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(8 Questions)

  • Q1. About technical knowledge and experience
  • Q2. What are some of the programming languages that you regularly use in your work? What is your experience in using Visual Studio? What do you know about in-tier architecture? Describe its elements and their ...
  • Q3. In network architecture, explain the role of DMZ.
  • Ans. 

    DMZ is a network segment that separates an internal network from an external network.

    • DMZ stands for Demilitarized Zone.

    • It acts as a buffer zone between the internet and the internal network.

    • It contains servers that are accessible from the internet, but not the internal network.

    • It enhances security by limiting direct access to the internal network.

    • Examples of servers in DMZ include web servers, email servers, and FTP se

  • Answered by AI
  • Q4. In network architecture, explain the role of DMZ
  • Ans. 

    DMZ is a network segment that separates an internal network from an external network.

    • DMZ stands for Demilitarized Zone

    • It acts as a buffer zone between the internet and the internal network

    • It contains servers that are accessible from the internet, but not the internal network

    • It enhances security by limiting direct access to the internal network

    • Examples of servers in DMZ include web servers, email servers, and FTP server

  • Answered by AI
  • Q5. What are the different types of OS you are comfortable working with?
  • Ans. 

    I am comfortable working with Windows, Linux and MacOS operating systems.

    • Proficient in Windows OS and its various versions

    • Familiar with Linux OS and its distributions like Ubuntu, Fedora, and CentOS

    • Experienced in MacOS and its versions like Mojave and Catalina

  • Answered by AI
  • Q6. How many development tools have you used
  • Ans. 

    I have used several development tools throughout my career.

    • I have experience with programming languages such as C++, Java, and Python.

    • I have used IDEs such as Eclipse, Visual Studio, and PyCharm.

    • I have experience with version control systems such as Git and SVN.

    • I have used simulation tools such as LTSpice and MATLAB.

    • I have experience with hardware design tools such as Altium and EagleCAD.

  • Answered by AI
  • Q7. If you have to change your career path, what job would you prefer?
  • Q8. What was the recent technical project you worked on? What were your key responsibilities

Interview Preparation Tips

Interview preparation tips for other job seekers - A home or business computer network consists of computers and mobile devices that you set up to use with a local area network that uses a broadband router to connect to the internet. As the broadband router filters external traffic, allowing only legitimate messages to pass through, it acts as a protective firewall. A DMZ Network, which is also known as a demilitarised zone network or a perimeter network in the computer security industry, is a separate sub-network that connects the company's external-facing services to the internet. The firewall isolates it and it creates a security layer between the local area network and the internet. So, even if your computer gets compromised at some point, the network will remain safe."

Skills evaluated in this interview

Syrma SGS Technologies Interview FAQs

How many rounds are there in Syrma SGS Technologies Electrical Engineer interview?
Syrma SGS Technologies interview process usually has 3 rounds. The most common rounds in the Syrma SGS Technologies interview process are Resume Shortlist, Technical and HR.
What are the top questions asked in Syrma SGS Technologies Electrical Engineer interview?

Some of the top questions asked at the Syrma SGS Technologies Electrical Engineer interview -

  1. What are the fundamental components of electric circui...read more
  2. What are basic electrical skil...read more
  3. Department related questi...read more

Tell us how to improve this page.

Interview Questions from Similar Companies

Flex Interview Questions
4.0
 • 185 Interviews
Navitasys India Interview Questions
4.2
 • 101 Interviews
Wistron Interview Questions
3.9
 • 82 Interviews
TE Connectivity Interview Questions
4.1
 • 81 Interviews
Secure Meters Interview Questions
4.1
 • 65 Interviews
DBG Technology Interview Questions
3.8
 • 63 Interviews
Vertiv Interview Questions
4.0
 • 49 Interviews
View all
Syrma SGS Technologies Electrical Engineer Salary
based on 5 salaries
₹3 L/yr - ₹5 L/yr
21% less than the average Electrical Engineer Salary in India
View more details
Junior Engineer
126 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Assistant Manager
95 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Senior Engineer
91 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Engineer
61 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Quality Engineer
51 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Explore more salaries
Compare Syrma SGS Technologies with

Flex

4.0
Compare

Sanmina Sci

4.0
Compare

Jabil Circuit India

4.0
Compare

Celestica

3.9
Compare
Did you find this page helpful?
Yes No
write
Share an Interview