Upload Button Icon Add office photos

Filter interviews by

Sunlife Pharma Services Maintenance Engineer Interview Questions and Answers

Updated 12 Nov 2024

Sunlife Pharma Services Maintenance Engineer Interview Experiences

1 interview found

Interview experience
4
Good
Difficulty level
Hard
Process Duration
-
Result
Selected Selected

I applied via Walk-in and was interviewed before Nov 2023. There was 1 interview round.

Round 1 - HR 

(5 Questions)

  • Q1. What is a change over switch ?
  • Ans. 

    A change over switch is a device used to switch power supply from one source to another source.

    • Used to switch power supply between two sources

    • Commonly used in backup power systems

    • Helps in ensuring continuous power supply during power outages

  • Answered by AI
  • Q2. Star delta starter
  • Q3. DG Set functioning
  • Q4. What is stroboscopic effect & it's rectification
  • Ans. 

    Stroboscopic effect is a visual phenomenon where a moving object appears stationary or moving slowly due to rapid flashing light. Rectification involves adjusting the frequency of the light source.

    • Stroboscopic effect occurs when a moving object is illuminated by a light source flashing at a frequency close to the object's movement speed.

    • This can cause the object to appear stationary or moving slowly, creating an optica...

  • Answered by AI
  • Q5. Finally tell about yourself

Interview questions from similar companies

Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Naukri.com and was interviewed before Nov 2023. There were 3 interview rounds.

Round 1 - HR 

(2 Questions)

  • Q1. Introduce yourself?
  • Q2. Reason of job change?
Round 2 - Technical 

(4 Questions)

  • Q1. Tell me about yourself?
  • Ans. 

    I am a dedicated Maintenance Engineer with a strong background in mechanical and electrical systems.

    • Experienced in troubleshooting and repairing equipment

    • Skilled in preventive maintenance practices

    • Proficient in reading technical manuals and blueprints

    • Strong knowledge of safety regulations and protocols

  • Answered by AI
  • Q2. What is your roles and responsibilities as a maintenance Engineer?
  • Ans. 

    Maintenance Engineers are responsible for ensuring the smooth operation of machinery and equipment in a facility.

    • Performing regular maintenance on machinery and equipment

    • Troubleshooting issues and repairing faulty equipment

    • Creating maintenance schedules and plans

    • Ensuring compliance with safety regulations

    • Training and supervising maintenance staff

    • Keeping detailed records of maintenance activities

  • Answered by AI
  • Q3. What is the reason of hunting in DG sets?
  • Ans. 

    Hunting in DG sets is caused by the engine's inability to maintain a constant speed due to variations in load.

    • Hunting occurs when the engine alternates between overspeed and underspeed conditions.

    • It can be caused by sudden changes in load demand or improper fuel/air mixture.

    • Hunting can lead to inefficient operation, increased fuel consumption, and potential damage to the engine.

    • Regular maintenance and tuning can help r

  • Answered by AI
  • Q4. What is the process of water chiller maintenance work?
  • Ans. 

    Water chiller maintenance involves regular cleaning, inspection, and servicing to ensure optimal performance and prevent breakdowns.

    • Regularly clean the condenser and evaporator coils to remove dirt and debris

    • Check refrigerant levels and top up if necessary

    • Inspect and replace filters as needed

    • Check for leaks and repair any damaged components

    • Schedule routine maintenance with a qualified technician

    • Keep a maintenance log t

  • Answered by AI
Round 3 - HR 

(1 Question)

  • Q1. What is your salary expectations?
Interview experience
4
Good
Difficulty level
Hard
Process Duration
2-4 weeks
Result
Selected Selected

I applied via Recruitment Consulltant and was interviewed before Jun 2022. There were 5 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Aptitude Test 

Basic questions with respect to your role

Round 3 - Case Study 

Checkpoints during breakdown

Round 4 - Technical 

(2 Questions)

  • Q1. Machine principal
  • Q2. Installation and operation process
Round 5 - HR 

(1 Question)

  • Q1. Salary disscussion

Interview Preparation Tips

Topics to prepare for Abbott Maintenance Engineer interview:
  • Hr round is crucial
Interview preparation tips for other job seekers - Na

I applied via Company Website and was interviewed before Nov 2020. There was 1 interview round.

Interview Questionnaire 

2 Questions

  • Q1. What New Skills Have You Developed Recently?
  • Q2. ABILITY TO MAKE DECISIONS AND SOLVE PROBLEMS.

Interview Preparation Tips

Interview preparation tips for other job seekers - A careers guidance interview is an impartial, one-to-one meeting between yourself and a professionally qualified careers adviser
Interview experience
1
Bad
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
-

I applied via Company Website and was interviewed in Feb 2024. There were 2 interview rounds.

Round 1 - Technical 

(1 Question)

  • Q1. ITI electrician
Round 2 - Technical 

(1 Question)

  • Q1. ITI electrician theory

I applied via Recruitment Consulltant and was interviewed in May 2022. There was 1 interview round.

Round 1 - Technical 

(3 Questions)

  • Q1. What is circuit, how work switch
  • Ans. 

    A circuit is a closed loop of conductive material that allows electricity to flow. A switch is a device that controls the flow of electricity in a circuit.

    • A circuit is made up of a power source, conductive material, and a load.

    • Electricity flows from the power source through the conductive material and into the load.

    • A switch is used to open or close the circuit, controlling the flow of electricity.

    • Switches can be manual...

  • Answered by AI
  • Q2. And about electrical safety
  • Q3. What type of source of electrical energy ,what is MCB and why use MCB ,and process of electrical energy generation to consumers
  • Ans. 

    MCB is a type of source of electrical energy used for protection against overload and short circuit.

    • MCB stands for Miniature Circuit Breaker.

    • It is a device that automatically switches off the electrical circuit during abnormal conditions such as overload or short circuit.

    • MCBs are commonly used in residential, commercial, and industrial electrical installations.

    • They provide protection to electrical equipment and prevent...

  • Answered by AI

Interview Preparation Tips

Topics to prepare for Wipro Electrical Maintenance Engineer interview:
  • Electrical Works
  • Basic electrica
Interview preparation tips for other job seekers - I advise all of you we will do work from heart

I applied via Walk-in and was interviewed in Feb 2022. There was 1 interview round.

Round 1 - Technical 

(1 Question)

  • Q1. Subjects and theoritical knowledge ,previous company experience

Interview Preparation Tips

Interview preparation tips for other job seekers - my study and experience in electrical field
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Recruitment Consulltant and was interviewed in Jun 2024. There were 2 interview rounds.

Round 1 - HR 

(2 Questions)

  • Q1. Why you want to change your job?
  • Q2. Are you suitable to relocate?
Round 2 - Technical 

(2 Questions)

  • Q1. What is OTI and WTI?
  • Ans. 

    OTI stands for Oil Temperature Indicator and WTI stands for Winding Temperature Indicator.

    • OTI measures the temperature of the oil in a transformer to ensure it is within safe operating limits.

    • WTI measures the temperature of the winding in a transformer to prevent overheating.

    • Both OTI and WTI are crucial in monitoring the health and performance of transformers.

    • If either OTI or WTI readings exceed safe limits, it can ind

  • Answered by AI
  • Q2. What we do in dg for c check?
  • Ans. 

    In a DG for C check, maintenance tasks such as engine overhaul, component inspections, and system testing are performed to ensure the generator is in optimal condition.

    • Perform engine overhaul to ensure proper functioning

    • Inspect components for wear and tear

    • Test systems to ensure they are functioning correctly

    • Replace any faulty parts to maintain optimal performance

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Good MNC company
Interview experience
4
Good
Difficulty level
Hard
Process Duration
2-4 weeks
Result
Selected Selected

I applied via Recruitment Consulltant and was interviewed before Jun 2022. There were 5 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Don’t add your photo or details such as gender, age, and address in your resume. These details do not add any value.
View all tips
Round 2 - Aptitude Test 

Basic questions with respect to your role

Round 3 - Case Study 

Checkpoints during breakdown

Round 4 - Technical 

(2 Questions)

  • Q1. Machine principal
  • Q2. Installation and operation process
Round 5 - HR 

(1 Question)

  • Q1. Salary disscussion

Interview Preparation Tips

Topics to prepare for Abbott Maintenance Engineer interview:
  • Hr round is crucial
Interview preparation tips for other job seekers - Na

I applied via Company Website and was interviewed before Nov 2020. There was 1 interview round.

Interview Questionnaire 

2 Questions

  • Q1. What New Skills Have You Developed Recently?
  • Q2. ABILITY TO MAKE DECISIONS AND SOLVE PROBLEMS.

Interview Preparation Tips

Interview preparation tips for other job seekers - A careers guidance interview is an impartial, one-to-one meeting between yourself and a professionally qualified careers adviser

Sunlife Pharma Services Interview FAQs

How many rounds are there in Sunlife Pharma Services Maintenance Engineer interview?
Sunlife Pharma Services interview process usually has 1 rounds. The most common rounds in the Sunlife Pharma Services interview process are HR.
What are the top questions asked in Sunlife Pharma Services Maintenance Engineer interview?

Some of the top questions asked at the Sunlife Pharma Services Maintenance Engineer interview -

  1. What is stroboscopic effect & it's rectificat...read more
  2. What is a change over switc...read more
  3. Star delta star...read more

Tell us how to improve this page.

Interview Questions from Similar Companies

Wipro Interview Questions
3.7
 • 5.6k Interviews
IQVIA Interview Questions
3.9
 • 456 Interviews
Aurobindo Pharma Interview Questions
4.0
 • 231 Interviews
Abbott Interview Questions
4.2
 • 142 Interviews
Max Healthcare Interview Questions
4.1
 • 131 Interviews
Fortis Healthcare Interview Questions
4.0
 • 122 Interviews
View all
Compare Sunlife Pharma Services with

Wipro

3.7
Compare

Sun Pharmaceutical Industries

4.0
Compare

Aurobindo Pharma

4.0
Compare

IQVIA

3.9
Compare
Did you find this page helpful?
Yes No
write
Share an Interview