Filter interviews by
I appeared for an interview in Jul 2019.
MSDS of xylene and acetone and pour point definition.
MSDS of xylene and acetone provide information on their physical and chemical properties, health hazards, and safety precautions.
Pour point is the lowest temperature at which a liquid will flow.
Xylene is a colorless, flammable liquid used as a solvent and in the production of plastics, synthetic fibers, and dyes.
Acetone is a colorless, volatile liquid used as a solve...
I applied via Referral and was interviewed in Dec 2023. There was 1 interview round.
To check the verticality of a column, use a plumb bob or laser level. Acceptance criteria: deviation within a specified tolerance.
Use a plumb bob or laser level to check if the column is perfectly vertical.
Ensure the plumb bob or laser level is aligned with the centerline of the column.
Measure the deviation from the vertical position and compare it to the specified tolerance.
Acceptance criteria may vary depending on th
The electrode used for A36 steel is typically E7018.
E7018 electrode is commonly used for welding A36 steel due to its high tensile strength and excellent weldability.
It provides good penetration and produces strong, clean welds.
Other suitable electrodes for A36 steel include E6010, E6011, and E6013.
The choice of electrode depends on the specific welding requirements and conditions.
The salt content on the blasted surface in onshore areas is determined through testing and analysis.
Salt content on the blasted surface can be measured using various methods such as conductivity meters, chloride ion tests, or salt spray tests.
The salt content is usually expressed in terms of parts per million (ppm) or milligrams per square meter (mg/m²).
High salt content on the blasted surface can lead to corrosion and...
I applied via Referral and was interviewed in Nov 2023. There was 1 interview round.
GC is operated by setting the parameters, injecting the sample, running the analysis, and interpreting the results.
Set the parameters such as temperature, flow rate, and detector settings on the GC machine.
Inject the sample into the GC column using a syringe or an autosampler.
Run the analysis by starting the GC machine and allowing the sample to separate into its components.
Interpret the results by analyzing the peaks ...
Sun Petrochemicals interview questions for popular designations
I applied via Referral and was interviewed in Jul 2021. There were 3 interview rounds.
Commissioning of a sub sea PLEM to CRP #1500 class shut down valve instrumentation.
Ensure proper installation of the valve and its associated instrumentation.
Perform loop checks and functional tests to verify proper operation.
Calibrate and configure the valve instrumentation according to the control system requirements.
Verify the valve's response to control signals and emergency shutdown signals.
Perform a final inspect...
I will ensure smooth start up for plant by conducting thorough testing, creating detailed procedures, and training the operators.
Conduct thorough testing of all equipment and systems before start up
Create detailed start up procedures and checklists
Train operators on the procedures and ensure they understand their roles and responsibilities
Perform simulations and drills to identify and address any potential issues
Collab...
I applied via Referral and was interviewed before Feb 2021. There were 2 interview rounds.
Top trending discussions
I appeared for an interview in Mar 2017.
To make the red fishes 98%, 50 fishes have to be removed from the aquarium.
Calculate 1% of 200 fishes, which is 2 fishes.
To make the red fishes 98%, subtract 1% (2 fishes) from 99% (198 fishes).
To find the number of fishes to be removed, divide the difference by 1% (2 fishes).
Therefore, 50 fishes have to be removed to make the red fishes 98%.
I appeared for an interview in Feb 2017.
I appeared for an interview in Mar 2017.
To make the red fishes 98%, 50 fishes have to be removed from the aquarium.
Calculate 1% of 200 fishes to find the number of red fishes.
Subtract the number of red fishes from 200 to find the number of non-red fishes.
Calculate 2% of the total number of fishes to find the desired number of red fishes.
Subtract the desired number of red fishes from the current number of red fishes to find the number of fishes to be removed.
posted on 3 May 2017
I appeared for an interview before May 2016.
Some of the top questions asked at the Sun Petrochemicals interview -
based on 2 interviews
Interview experience
based on 35 reviews
Rating in categories
Production Engineer
14
salaries
| ₹4.8 L/yr - ₹13 L/yr |
Senior Officer
9
salaries
| ₹6 L/yr - ₹9.5 L/yr |
Field Operator
7
salaries
| ₹2 L/yr - ₹3.6 L/yr |
Senior Executive
7
salaries
| ₹6 L/yr - ₹6.4 L/yr |
DCS Operator
5
salaries
| ₹3.6 L/yr - ₹10.8 L/yr |
Huawei Technologies
Z X Learning
Evision Technoserve
Cogoport