Upload Button Icon Add office photos

Filter interviews by

Clear (1)

Sudarshan Chemical Industries Graduate Engineer Trainee (Get) Interview Questions and Answers

Updated 25 Mar 2022

Sudarshan Chemical Industries Graduate Engineer Trainee (Get) Interview Experiences

1 interview found

I applied via Campus Placement and was interviewed before Mar 2021. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all Resume tips
Round 2 - Aptitude Test 

Basic quantitative aptitude

Interview Preparation Tips

Interview preparation tips for other job seekers - Basic knowledge of chemical engineering

Interview questions from similar companies

Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Aptitude Test 

Online test on technical and aptitude with maths

Round 2 - Technical 

(2 Questions)

  • Q1. Your favorite subject
  • Q2. What have you learned in your training
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Not Selected

I applied via Campus Placement and was interviewed in Apr 2024. There were 2 interview rounds.

Round 1 - Aptitude Test 

Domain based questions and basic aptitude question

Round 2 - Technical 

(5 Questions)

  • Q1. About distillation column, basic questions ,cooling tower concept.
  • Q2. Difference between CSTR and PFR, Pumps ,Heat Exchanger.
  • Ans. 

    CSTR and PFR are types of reactors, pumps are used to move fluids, heat exchangers transfer heat between fluids.

    • CSTR (Continuous Stirred Tank Reactor) has a constant volume and operates under steady-state conditions.

    • PFR (Plug Flow Reactor) has a varying volume and operates under unsteady-state conditions.

    • Pumps are mechanical devices used to move fluids from one place to another, like centrifugal pumps or positive displ...

  • Answered by AI
  • Q3. What is cracking
  • Ans. 

    Cracking is a process in which complex hydrocarbon molecules are broken down into simpler molecules.

    • Cracking is a refining process used to convert large hydrocarbon molecules into smaller, more valuable ones.

    • It is done by breaking the carbon-carbon bonds in the molecules.

    • Examples include catalytic cracking and steam cracking.

  • Answered by AI
  • Q4. What is Reforming
  • Ans. 

    Reforming is a process used in the petroleum industry to convert low-octane naphtha into high-octane gasoline.

    • Reforming involves rearranging the molecular structure of hydrocarbons to increase their octane rating.

    • It is typically done using a catalyst at high temperatures and pressures.

    • The process can also produce hydrogen gas as a byproduct.

    • Reforming is an important step in the production of gasoline and other fuels in...

  • Answered by AI
  • Q5. What is range and approach of cooling tower
  • Ans. 

    The range of a cooling tower refers to the maximum distance at which it can effectively cool air, while the approach is the temperature difference between the cooled water and the entering air.

    • Range of a cooling tower is typically around 5-20 degrees Fahrenheit

    • Approach of a cooling tower is usually around 8-15 degrees Fahrenheit

    • The range and approach of a cooling tower can vary based on factors such as design, size, an

  • Answered by AI

Interview Preparation Tips

Topics to prepare for Tata Chemicals Graduate Engineer Trainee (Get) interview:
  • Distillation Column
  • Heat Exchangers
  • Pumps
  • Cooling Tower
Interview preparation tips for other job seekers - Have Patience

I applied via Campus Placement and was interviewed before Aug 2021. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all Resume tips
Round 2 - Technical 

(4 Questions)

  • Q1. Being a mechanical Engineer you should aware about the basic of fluid mechanics Heat transfer and little bit strength of materials subjects was more weightage in the technical interview.
  • Q2. How to design equipment?
  • Ans. 

    Equipment design involves identifying user needs, creating prototypes, testing, and refining the design.

    • Identify user needs and requirements

    • Create prototypes and test them thoroughly

    • Refine the design based on feedback and testing

    • Consider safety, ergonomics, and usability

    • Use appropriate materials and manufacturing processes

    • Ensure compliance with relevant regulations and standards

  • Answered by AI
  • Q3. What was centrifugal pump and difference between pump and compressor?
  • Ans. 

    A centrifugal pump is a mechanical device used to transport fluids by converting rotational kinetic energy to hydrodynamic energy.

    • Centrifugal pumps are commonly used in industries such as oil and gas, chemical, and water treatment.

    • They work by using an impeller to create a low-pressure area at the center of the pump, which draws in fluid and then expels it at high pressure through the outlet.

    • Pumps are used to transport...

  • Answered by AI
  • Q4. What was NPSH? Types of pumps..
  • Ans. 

    NPSH stands for Net Positive Suction Head. It is a measure of the pressure available at the suction side of a pump to prevent cavitation.

    • NPSH is important in pump selection and operation.

    • It is the difference between the total suction head and the vapor pressure of the pumped fluid.

    • Insufficient NPSH can lead to cavitation, which can damage the pump and reduce its efficiency.

    • Different types of pumps have different NPSH r...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Prepare the HR questions as well as technical questions related to SOM thermo and Heat transfer fluid mechanics and machinery are important subject to interview point of view.

I applied via Campus Placement and was interviewed before Jul 2021. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all Resume tips
Round 2 - Technical 

(1 Question)

  • Q1. 1) introduce yourself 2)tell us more about your hobbies? 3) explain about your internship? 4) what was your final year project? 5)what is your favorite subject? 6) Tell us something about transformer prote...

Interview Preparation Tips

Interview preparation tips for other job seekers - Be thorough with your basics and prepare your core subjects well.
Have clarity about your project and internship. Be calm, honest and fluent.

I applied via Campus Placement and was interviewed in Feb 2021. There were 4 interview rounds.

Interview Questionnaire 

6 Questions

  • Q1. Draw simply supported beam with uniform load distribution(strength of materials)
  • Ans. 

    Drawing a simply supported beam with uniform load distribution in strength of materials.

    • Draw a straight line representing the beam.

    • Mark the supports at both ends of the beam.

    • Draw arrows representing the uniform load distribution on the beam.

    • Calculate the reactions at the supports using equations of equilibrium.

    • Draw the shear force and bending moment diagrams for the beam.

    • Calculate the maximum shear force and bending mo...

  • Answered by AI
  • Q2. About equation of power of centrifugal pump.
  • Q3. What is pressure and velocity compounding.
  • Ans. 

    Pressure and velocity compounding are methods used to increase the efficiency of steam turbines.

    • Pressure compounding involves dividing the pressure drop across the turbine into smaller stages, each with its own set of moving blades.

    • Velocity compounding involves dividing the steam flow into smaller streams, each flowing through a set of fixed blades.

    • Both methods increase the efficiency of the turbine by reducing the amo...

  • Answered by AI
  • Q4. Tell me about iron-iron carbide diagram
  • Ans. 

    Iron-iron carbide diagram is a graphical representation of the phases of iron and carbon at different temperatures and compositions.

    • Also known as the Fe-C diagram

    • Shows the transformation of iron from ferrite to austenite to pearlite

    • Used to determine the microstructure and properties of steel

    • Helps in designing heat treatment processes for steel

    • Important tool for metallurgists and materials engineers

  • Answered by AI
  • Q5. Tell me normalizing, annealing, and hardening processes.
  • Ans. 

    Normalizing, annealing, and hardening are heat treatment processes used to alter the properties of metals.

    • Normalizing involves heating the metal to a temperature above its critical point and then cooling it in air. This process improves the strength and toughness of the metal.

    • Annealing involves heating the metal to a specific temperature and then cooling it slowly. This process reduces the hardness and increases the du...

  • Answered by AI
  • Q6. Formula of efficiency of Rankine cycle.
  • Ans. 

    Efficiency of Rankine cycle formula.

    • Efficiency = (Net work output / Heat input)

    • Efficiency = (1 - T2/T1)

    • T1 is the temperature of steam at the inlet of turbine

    • T2 is the temperature of steam at the outlet of turbine

    • Net work output = (P1 - P2) * (V2 - V1)

    • Heat input = m * (h1 - h2)

    • m is the mass flow rate of steam

    • h1 is the enthalpy of steam at the inlet of turbine

    • h2 is the enthalpy of steam at the outlet of turbine

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - i applied through campus placement
1st (round is online written test ( all questions are previous year gate exams)
2nd ( round is technical + hr interview )
be patient because it takes 3-4 month to get answer from company
and selection ratio is 10:1
Interview experience
4
Good
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Not Selected

I applied via Campus Placement and was interviewed in Jan 2023. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Don’t add your photo or details such as gender, age, and address in your resume. These details do not add any value.
View all Resume tips
Round 2 - Aptitude Test 

1st aptitude followed by psychometric test .

Round 3 - Technical 

(2 Questions)

  • Q1. 1. How you will select a heat exchanger for different type of fluids.
  • Ans. 

    The selection of a heat exchanger for different fluids depends on factors such as fluid properties, flow rates, and heat transfer requirements.

    • Identify the properties of the fluids such as viscosity, density, and thermal conductivity.

    • Determine the flow rates and pressure drops of the fluids.

    • Select the appropriate type of heat exchanger such as shell and tube, plate and frame, or spiral.

    • Consider the heat transfer requir...

  • Answered by AI
  • Q2. What Is reflux ratio.
  • Ans. 

    Reflux ratio is the ratio of the amount of liquid refluxed to the amount of liquid that is being distilled.

    • It is an important parameter in distillation processes.

    • It helps in determining the efficiency of the distillation column.

    • A high reflux ratio results in a higher purity of the distillate.

    • Reflux ratio can be adjusted to optimize the distillation process.

    • It is calculated as the ratio of the reflux flow rate to the di

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Thay look for basic fundamentals of your course..so prepare accordingly.
Interview experience
5
Excellent
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Campus Placement and was interviewed before Jan 2022. There were 4 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all Resume tips
Round 2 - Group Discussion 

10 people in one group, topic drone technology

Round 3 - Technical 

(2 Questions)

  • Q1. Modes of Heat transfer
  • Ans. 

    Modes of heat transfer include conduction, convection, and radiation.

    • Conduction is the transfer of heat through a material without any movement of the material itself.

    • Convection is the transfer of heat through the movement of fluids, such as air or water.

    • Radiation is the transfer of heat through electromagnetic waves, such as the heat from the sun.

    • Examples of conduction include touching a hot stove or holding a cold dr...

  • Answered by AI
  • Q2. Design of distillation coloumn
  • Ans. 

    Design of distillation column involves determining the number of trays, column diameter, and feed location.

    • The number of trays is determined by the separation required and the reflux ratio.

    • Column diameter is determined by the vapor and liquid flow rates.

    • Feed location is determined by the composition of the feed and the desired product purity.

    • Other factors to consider include pressure drop, heat transfer, and material s...

  • Answered by AI
Round 4 - HR 

(2 Questions)

  • Q1. If we send you to Jammu will you work
  • Ans. 

    Yes, I am willing to work in Jammu.

    • I am open to working in any location assigned to me

    • I am adaptable and can adjust to new environments

    • I am excited to explore new places and cultures

    • I have worked in different cities before and have had positive experiences

  • Answered by AI
  • Q2. Tell us more about yourself

Interview Preparation Tips

Interview preparation tips for other job seekers - Be yourself and focus more on basics because they care about that only.
Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Aptitude Test 

Good performance & technical answer

Round 2 - Technical 

(2 Questions)

  • Q1. What is Pump Whay required pump
  • Ans. 

    Pump Whay is a required pump for a specific application.

    • Pump Whay is likely a typo and should be corrected to 'Pump What'.

    • The required pump depends on the specific application and its requirements.

    • Examples of pump types include centrifugal pumps, diaphragm pumps, and gear pumps.

  • Answered by AI
  • Q2. What is sop & standard ruals
  • Ans. 

    SOP stands for Standard Operating Procedure, which are established procedures to ensure consistency and quality in operations. Standard rules are guidelines that must be followed.

    • SOPs are detailed step-by-step instructions on how to perform a specific task or operation.

    • Standard rules are general guidelines or regulations that must be followed in a particular setting.

    • SOPs help in maintaining consistency, quality, and ef...

  • Answered by AI

Interview Questionnaire 

3 Questions

  • Q1. Tell me something which is not there in resume?
  • Q2. What did you learn in internship?
  • Q3. Current affairs related questions.

Interview Preparation Tips

Interview preparation tips for other job seekers - Most of the questions were based on your resume. So be very clear and concise while speaking about what mentioned in resume.
Contribute & help others!
anonymous
You can choose to be anonymous

Sudarshan Chemical Industries Interview FAQs

How many rounds are there in Sudarshan Chemical Industries Graduate Engineer Trainee (Get) interview?
Sudarshan Chemical Industries interview process usually has 2 rounds. The most common rounds in the Sudarshan Chemical Industries interview process are Resume Shortlist and Aptitude Test.

Recently Viewed

INTERVIEWS

Nuclear Power Corporation of India

No Interviews

INTERVIEWS

Nuclear Power Corporation of India

No Interviews

INTERVIEWS

Nuclear Power Corporation of India

No Interviews

INTERVIEWS

Nuclear Power Corporation of India

No Interviews

INTERVIEWS

Nuclear Power Corporation of India

10 top interview questions

LIST OF COMPANIES

Nuclear Power Corporation of India

Locations

INTERVIEWS

Nuclear Power Corporation of India

No Interviews

INTERVIEWS

Umang Software Technologies

No Interviews

INTERVIEWS

Deepak Nitrite

No Interviews

INTERVIEWS

Royal Infraconstru

No Interviews

Tell us how to improve this page.

8% more than the average Graduate Engineer Trainee (Get) Salary in India
View more details

Sudarshan Chemical Industries Graduate Engineer Trainee (Get) Reviews and Ratings

based on 4 reviews

4.5/5

Rating in categories

4.2

Skill development

4.2

Work-life balance

4.4

Salary

4.5

Job security

4.2

Company culture

4.5

Promotions

4.4

Work satisfaction

Explore 4 Reviews and Ratings
Field Officer
157 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Senior Executive
124 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Executive
114 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Junior Executive
106 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Assistant Manager
66 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Explore more salaries
Compare Sudarshan Chemical Industries with

BASF

4.4
Compare

Pidilite Industries

4.3
Compare

UPL

4.1
Compare

Tata Chemicals

4.1
Compare
Did you find this page helpful?
Yes No
write
Share an Interview
Rate your experience using AmbitionBox
Terrible
Terrible
Poor
Poor
Average
Average
Good
Good
Excellent
Excellent